Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.

Upstream: https://github.com/ARMmbed/DAPLink

Revision:
0:01f31e923fe2
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/hic_hal/freescale/k26f/fsl_usb.h	Tue Apr 07 12:55:42 2020 +0200
@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_USB_H__
+#define __FSL_USB_H__
+
+#include <stdint.h>
+#include <stdio.h>
+// #include "usb_osa.h"
+// #include "usb_misc.h"
+// #include "usb_spec.h"
+
+/*!
+ * @addtogroup usb_drv
+ * @{
+ */
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+/*! @brief Defines USB stack major version */
+#define USB_STACK_VERSION_MAJOR (0x01U)
+/*! @brief Defines USB stack minor version */
+#define USB_STACK_VERSION_MINOR (0x00U)
+/*! @brief Defines USB stack bugfix version */
+#define USB_STACK_VERSION_BUGFIX (0x00U)
+
+/*! @brief USB stack version definition */
+#define USB_MAKE_VERSION(major, minor, bugfix) (((major) << 16) | ((minor) << 8) | (bugfix))
+
+/*! @brief USB error code */
+typedef enum _usb_status
+{
+    kStatus_USB_Success = 0x00U, /*!< Success */
+    kStatus_USB_Error,           /*!< Failed */
+
+    kStatus_USB_Busy,                       /*!< Busy */
+    kStatus_USB_InvalidHandle,              /*!< Invalid handle */
+    kStatus_USB_InvalidParameter,           /*!< Invalid parameter */
+    kStatus_USB_InvalidRequest,             /*!< Invalid request */
+    kStatus_USB_ControllerNotFound,         /*!< Controller cannot be found */
+    kStatus_USB_InvalidControllerInterface, /*!< Invalid controller interface */
+
+    kStatus_USB_NotSupported,   /*!< Configuration is not supported */
+    kStatus_USB_Retry,          /*!< Enumeration get configuration retry */
+    kStatus_USB_TransferStall,  /*!< Transfer stalled */
+    kStatus_USB_TransferFailed, /*!< Transfer failed */
+    kStatus_USB_AllocFail,      /*!< Allocation failed */
+    kStatus_USB_LackSwapBuffer, /*!< Insufficient swap buffer for KHCI */
+    kStatus_USB_TransferCancel, /*!< The transfer cancelled */
+    kStatus_USB_BandwidthFail,  /*!< Allocate bandwidth failed */
+    kStatus_USB_MSDStatusFail,  /*!< For MSD, the CSW status means fail */
+} usb_status_t;
+
+/*! @brief USB host handle type define */
+typedef void *usb_host_handle;
+
+/*! @brief USB device handle type define. For device stack it is the whole device handle; for host stack it is the
+ * attached device instance handle*/
+typedef void *usb_device_handle;
+
+/*! @brief USB OTG handle type define */
+typedef void *usb_otg_handle;
+
+/*! @brief USB controller ID */
+typedef enum _usb_controller_index
+{
+    kUSB_ControllerKhci0 = 0U, /*!< KHCI 0U */
+    kUSB_ControllerKhci1,      /*!< KHCI 1U, Currently, there are no platforms which have two KHCI IPs, this is reserved
+                                  to be used in the future. */
+    kUSB_ControllerEhci0,      /*!< EHCI 0U */
+    kUSB_ControllerEhci1,      /*!< EHCI 1U, Currently, there are no platforms which have two KHCI IPs, this is reserved
+                                  to be used in the future. */
+} usb_controller_index_t;
+
+/**
+* @brief USB stack version fields
+*/
+typedef struct _usb_version
+{
+    uint8_t major;  /*!< Major */
+    uint8_t minor;  /*!< Minor */
+    uint8_t bugfix; /*!< Bug fix */
+} usb_version_t;
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+
+/*! @} */
+
+#endif /* __FSL_USB_H__ */