Diff: source/hic_hal/atmel/sam3u2c/instance/usart3.h

Revision:

0:01f31e923fe2

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/hic_hal/atmel/sam3u2c/instance/usart3.h	Tue Apr 07 12:55:42 2020 +0200
@@ -0,0 +1,92 @@
+/* ---------------------------------------------------------------------------- */
+/*                  Atmel Microcontroller Software Support                      */
+/*                       SAM Software Package License                           */
+/* ---------------------------------------------------------------------------- */
+/* Copyright (c) %copyright_year%, Atmel Corporation                                        */
+/*                                                                              */
+/* All rights reserved.                                                         */
+/*                                                                              */
+/* Redistribution and use in source and binary forms, with or without           */
+/* modification, are permitted provided that the following condition is met:    */
+/*                                                                              */
+/* - Redistributions of source code must retain the above copyright notice,     */
+/* this list of conditions and the disclaimer below.                            */
+/*                                                                              */
+/* Atmel's name may not be used to endorse or promote products derived from     */
+/* this software without specific prior written permission.                     */
+/*                                                                              */
+/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
+/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
+/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
+/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
+/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
+/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
+/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
+/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
+/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
+/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
+/* ---------------------------------------------------------------------------- */
+
+#ifndef _SAM3U_USART3_INSTANCE_
+#define _SAM3U_USART3_INSTANCE_
+
+/* ========== Register definition for USART3 peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_USART3_CR          (0x4009C000U) /**< \brief (USART3) Control Register */
+#define REG_USART3_MR          (0x4009C004U) /**< \brief (USART3) Mode Register */
+#define REG_USART3_IER          (0x4009C008U) /**< \brief (USART3) Interrupt Enable Register */
+#define REG_USART3_IDR          (0x4009C00CU) /**< \brief (USART3) Interrupt Disable Register */
+#define REG_USART3_IMR          (0x4009C010U) /**< \brief (USART3) Interrupt Mask Register */
+#define REG_USART3_CSR          (0x4009C014U) /**< \brief (USART3) Channel Status Register */
+#define REG_USART3_RHR          (0x4009C018U) /**< \brief (USART3) Receiver Holding Register */
+#define REG_USART3_THR          (0x4009C01CU) /**< \brief (USART3) Transmitter Holding Register */
+#define REG_USART3_BRGR          (0x4009C020U) /**< \brief (USART3) Baud Rate Generator Register */
+#define REG_USART3_RTOR          (0x4009C024U) /**< \brief (USART3) Receiver Time-out Register */
+#define REG_USART3_TTGR          (0x4009C028U) /**< \brief (USART3) Transmitter Timeguard Register */
+#define REG_USART3_FIDI          (0x4009C040U) /**< \brief (USART3) FI DI Ratio Register */
+#define REG_USART3_NER          (0x4009C044U) /**< \brief (USART3) Number of Errors Register */
+#define REG_USART3_IF          (0x4009C04CU) /**< \brief (USART3) IrDA Filter Register */
+#define REG_USART3_MAN          (0x4009C050U) /**< \brief (USART3) Manchester Encoder Decoder Register */
+#define REG_USART3_WPMR          (0x4009C0E4U) /**< \brief (USART3) Write Protect Mode Register */
+#define REG_USART3_WPSR          (0x4009C0E8U) /**< \brief (USART3) Write Protect Status Register */
+#define REG_USART3_RPR          (0x4009C100U) /**< \brief (USART3) Receive Pointer Register */
+#define REG_USART3_RCR          (0x4009C104U) /**< \brief (USART3) Receive Counter Register */
+#define REG_USART3_TPR          (0x4009C108U) /**< \brief (USART3) Transmit Pointer Register */
+#define REG_USART3_TCR          (0x4009C10CU) /**< \brief (USART3) Transmit Counter Register */
+#define REG_USART3_RNPR          (0x4009C110U) /**< \brief (USART3) Receive Next Pointer Register */
+#define REG_USART3_RNCR          (0x4009C114U) /**< \brief (USART3) Receive Next Counter Register */
+#define REG_USART3_TNPR          (0x4009C118U) /**< \brief (USART3) Transmit Next Pointer Register */
+#define REG_USART3_TNCR          (0x4009C11CU) /**< \brief (USART3) Transmit Next Counter Register */
+#define REG_USART3_PTCR          (0x4009C120U) /**< \brief (USART3) Transfer Control Register */
+#define REG_USART3_PTSR          (0x4009C124U) /**< \brief (USART3) Transfer Status Register */
+#else
+#define REG_USART3_CR (*(WoReg*)0x4009C000U) /**< \brief (USART3) Control Register */
+#define REG_USART3_MR (*(RwReg*)0x4009C004U) /**< \brief (USART3) Mode Register */
+#define REG_USART3_IER (*(WoReg*)0x4009C008U) /**< \brief (USART3) Interrupt Enable Register */
+#define REG_USART3_IDR (*(WoReg*)0x4009C00CU) /**< \brief (USART3) Interrupt Disable Register */
+#define REG_USART3_IMR (*(RoReg*)0x4009C010U) /**< \brief (USART3) Interrupt Mask Register */
+#define REG_USART3_CSR (*(RoReg*)0x4009C014U) /**< \brief (USART3) Channel Status Register */
+#define REG_USART3_RHR (*(RoReg*)0x4009C018U) /**< \brief (USART3) Receiver Holding Register */
+#define REG_USART3_THR (*(WoReg*)0x4009C01CU) /**< \brief (USART3) Transmitter Holding Register */
+#define REG_USART3_BRGR (*(RwReg*)0x4009C020U) /**< \brief (USART3) Baud Rate Generator Register */
+#define REG_USART3_RTOR (*(RwReg*)0x4009C024U) /**< \brief (USART3) Receiver Time-out Register */
+#define REG_USART3_TTGR (*(RwReg*)0x4009C028U) /**< \brief (USART3) Transmitter Timeguard Register */
+#define REG_USART3_FIDI (*(RwReg*)0x4009C040U) /**< \brief (USART3) FI DI Ratio Register */
+#define REG_USART3_NER (*(RoReg*)0x4009C044U) /**< \brief (USART3) Number of Errors Register */
+#define REG_USART3_IF (*(RwReg*)0x4009C04CU) /**< \brief (USART3) IrDA Filter Register */
+#define REG_USART3_MAN (*(RwReg*)0x4009C050U) /**< \brief (USART3) Manchester Encoder Decoder Register */
+#define REG_USART3_WPMR (*(RwReg*)0x4009C0E4U) /**< \brief (USART3) Write Protect Mode Register */
+#define REG_USART3_WPSR (*(RoReg*)0x4009C0E8U) /**< \brief (USART3) Write Protect Status Register */
+#define REG_USART3_RPR (*(RwReg*)0x4009C100U) /**< \brief (USART3) Receive Pointer Register */
+#define REG_USART3_RCR (*(RwReg*)0x4009C104U) /**< \brief (USART3) Receive Counter Register */
+#define REG_USART3_TPR (*(RwReg*)0x4009C108U) /**< \brief (USART3) Transmit Pointer Register */
+#define REG_USART3_TCR (*(RwReg*)0x4009C10CU) /**< \brief (USART3) Transmit Counter Register */
+#define REG_USART3_RNPR (*(RwReg*)0x4009C110U) /**< \brief (USART3) Receive Next Pointer Register */
+#define REG_USART3_RNCR (*(RwReg*)0x4009C114U) /**< \brief (USART3) Receive Next Counter Register */
+#define REG_USART3_TNPR (*(RwReg*)0x4009C118U) /**< \brief (USART3) Transmit Next Pointer Register */
+#define REG_USART3_TNCR (*(RwReg*)0x4009C11CU) /**< \brief (USART3) Transmit Next Counter Register */
+#define REG_USART3_PTCR (*(WoReg*)0x4009C120U) /**< \brief (USART3) Transfer Control Register */
+#define REG_USART3_PTSR (*(RoReg*)0x4009C124U) /**< \brief (USART3) Transfer Status Register */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#endif /* _SAM3U_USART3_INSTANCE_ */