Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
Diff: source/family/st/stm32l082cz/flash_blob.c
- Revision:
- 0:01f31e923fe2
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/source/family/st/stm32l082cz/flash_blob.c Tue Apr 07 12:55:42 2020 +0200 @@ -0,0 +1,73 @@ +/* Flash OS Routines (Automagically Generated) + * Copyright (c) 2009-2019 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "flash_blob.h" + +static const uint32_t stm32l0xx_192_flash_prog_blob[] = { + 0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2, + 0x4603b510, 0x69804851, 0x0224240f, 0x4c4f4320, 0x484f61a0, 0x484f60e0, 0x484f60e0, 0x484f6120, + 0x46206120, 0x240169c0, 0x40200524, 0xd1062800, 0x4c4c484b, 0x20066020, 0x484b6060, 0x200060a0, + 0x4601bd10, 0x68404841, 0x43102202, 0x60504a3f, 0x68404610, 0x43102201, 0x60504a3c, 0x47702000, + 0x483a4601, 0x22016840, 0x43100252, 0x60504a37, 0x68404610, 0x43102208, 0x60504a34, 0x60082000, + 0x483ae002, 0x60104a37, 0x69804830, 0x0fc007c0, 0xd1f62800, 0x6840482d, 0x02522201, 0x4a2b4390, + 0x46106050, 0x22086840, 0x4a284390, 0x20006050, 0x46034770, 0x47702001, 0x4603b570, 0x303f4608, + 0x01890981, 0xe03b2500, 0x68404820, 0x02b62601, 0x4e1e4330, 0x46306070, 0x26086840, 0x4e1b4330, + 0x24406070, 0x6810e004, 0x1d1b6018, 0x1f241d12, 0xd1f82c00, 0x481de002, 0x60304e1a, 0x69804813, + 0x0fc007c0, 0xd1f62800, 0x69804810, 0x0236260f, 0x28004030, 0x480dd006, 0x43306980, 0x61b04e0b, + 0xbd702001, 0x68404809, 0x02b62601, 0x4e0743b0, 0x46306070, 0x26086840, 0x4e0443b0, 0x1c6d6070, + 0x42a80988, 0x2000d8c0, 0x0000e7eb, 0x40022000, 0x89abcdef, 0x02030405, 0x8c9daebf, 0x13141516, + 0x00005555, 0x40003000, 0x00000fff, 0x0000aaaa, 0x00000000 +}; + +// Start address of flash +static const uint32_t flash_start = 0x08000000; +// Size of flash +static const uint32_t flash_size = 0x00030000; + +/** +* List of start and size for each size of flash sector +* The size will apply to all sectors between the listed address and the next address +* in the list. +* The last pair in the list will have sectors starting at that address and ending +* at address start + size. +*/ +static const sector_info_t sectors_info[] = { + {0x08000000, 0x00000080}, +}; + +static const program_target_t flash = { + 0x20000021, // Init + 0x20000063, // UnInit + 0x00000000, // EraseChip - NOT SUPPORTED + 0x20000081, // EraseSector + 0x200000d9, // ProgramPage + 0x0, // Verify + + // BKPT : start of blob + 1 + // RSB : blob start + header + rw data offset + // RSP : stack pointer + { + 0x20000001, + 0x20000190, + 0x20000800 + }, + + 0x20000000 + 0x00000A00, // mem buffer location + 0x20000000, // location to write prog_blob in target RAM + sizeof(stm32l0xx_192_flash_prog_blob), // prog_blob size + stm32l0xx_192_flash_prog_blob, // address of prog_blob + 0x00000080 // ram_to_flash_bytes_to_be_written +};