Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.

Upstream: https://github.com/ARMmbed/DAPLink

Revision:
0:01f31e923fe2
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/family/st/stm32f207zg/flash_blob.c	Tue Apr 07 12:55:42 2020 +0200
@@ -0,0 +1,65 @@
+/* Flash OS Routines (Automagically Generated)
+ * Copyright (c) 2009-2019 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+static const uint32_t STM32F207ZG_flash_prog_blob[] = {
+    0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2,
+    0x0e000300, 0xd3022820, 0x1d000940, 0x28104770, 0x0900d302, 0x47701cc0, 0x47700880, 0x49414842,
+    0x49426041, 0x21006041, 0x68c16001, 0x431122f0, 0x694060c1, 0xd4060680, 0x493d483e, 0x21066001,
+    0x493d6041, 0x20006081, 0x48374770, 0x05426901, 0x61014311, 0x47702000, 0x4833b510, 0x24046901,
+    0x61014321, 0x03a26901, 0x61014311, 0x4a314933, 0x6011e000, 0x03db68c3, 0x6901d4fb, 0x610143a1,
+    0xbd102000, 0xf7ffb530, 0x4927ffbb, 0x23f068ca, 0x60ca431a, 0x610c2402, 0x0700690a, 0x43020e40,
+    0x6908610a, 0x431003e2, 0x48246108, 0xe0004a21, 0x68cd6010, 0xd4fb03ed, 0x43a06908, 0x68c86108,
+    0x0f000600, 0x68c8d003, 0x60c84318, 0xbd302001, 0x4d15b570, 0x08891cc9, 0x008968eb, 0x433326f0,
+    0x230060eb, 0x4b16612b, 0x692ce017, 0x612c431c, 0x60046814, 0x03e468ec, 0x692cd4fc, 0x00640864,
+    0x68ec612c, 0x0f240624, 0x68e8d004, 0x60e84330, 0xbd702001, 0x1d121d00, 0x29001f09, 0x2000d1e5,
+    0x0000bd70, 0x45670123, 0x40023c00, 0xcdef89ab, 0x00005555, 0x40003000, 0x00000fff, 0x0000aaaa,
+    0x00000201, 0x00000000
+};
+
+/**
+* List of start and size for each size of flash sector
+* The size will apply to all sectors between the listed address and the next address
+* in the list.
+* The last pair in the list will have sectors starting at that address and ending
+* at address start + size.
+*/
+static const sector_info_t sectors_info[] = {
+    {0x08000000, 0x4000},
+};
+
+static const program_target_t flash = {
+    0x2000003d, // Init
+    0x2000006b, // UnInit
+    0x20000079, // EraseChip
+    0x200000a5, // EraseSector
+    0x200000f1, // ProgramPage
+    0x0,        // Verify
+
+    // BKPT : start of blob + 1
+    // RSB  : blob start + header + rw data offset
+    // RSP  : stack pointer
+    {
+        0x20000001,
+        0x20000164,
+        0x20000800
+    },
+
+    0x20000000 + 0x00000A00,  // mem buffer location
+    0x20000000,               // location to write prog_blob in target RAM
+    sizeof(STM32F207ZG_flash_prog_blob),   // prog_blob size
+    STM32F207ZG_flash_prog_blob,           // address of prog_blob
+    0x00000400       // ram_to_flash_bytes_to_be_written
+};