Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
Diff: source/family/siliconlabs/efm32gg/flash_blob.c
- Revision:
- 0:01f31e923fe2
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/source/family/siliconlabs/efm32gg/flash_blob.c Tue Apr 07 12:55:42 2020 +0200 @@ -0,0 +1,82 @@ +/** + * @file flash_blob.c + * @brief Flash algorithm for the efm32gg + * + * DAPLink Interface Firmware + * Copyright (c) 2009-2019, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "flash_blob.h" + +static const uint32_t efm32gg_flash_prog_blob[] = { + 0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2, + 0x4770ba40, 0x4770bac0, 0x4c0cb510, 0xf04068a0, 0x60a00001, 0x301af246, 0xf44f6560, 0x60e07040, + 0x20012100, 0xf83ef000, 0x65612100, 0xf02168a1, 0x60a10101, 0xbf182800, 0xbd102001, 0x400c0000, + 0x4684b510, 0xf44f2300, 0xf8505180, 0x1f092b04, 0x1c52d002, 0xe001d0f9, 0xd0131c50, 0x68a04c0c, + 0x0001f040, 0xf8c460a0, 0x2001c010, 0x200260e0, 0x210060e0, 0xf0002001, 0x4603f815, 0xf02068a0, + 0x60a00001, 0xbf142b00, 0x20002001, 0x0000bd10, 0x400c0000, 0xf6414902, 0x63c83071, 0x47702000, + 0x400c0000, 0x4b14b410, 0xc050f8df, 0x201cf8dc, 0x0f16f012, 0xf8dcd014, 0xf0200008, 0xf8cc0005, + 0xf0120008, 0xbf1e0f02, 0x0001f06f, 0x4770bc10, 0x0f04f012, 0xf04fbf1e, 0xbc1030ff, 0xe0074770, + 0x428a4002, 0xbc10d102, 0x47702000, 0xd1dd1e5b, 0xf06fbc10, 0x47700002, 0x00989680, 0x400c0000, + 0x4df0e92d, 0x1cc84604, 0x0603f020, 0x46904859, 0xf0416881, 0x60810101, 0xd9732e07, 0x0f07f014, + 0xf8d8d011, 0x61041000, 0x60c22201, 0x21086181, 0x210060c1, 0xf7ff4610, 0x2800ffb5, 0x1d24d17e, + 0x0810f108, 0x484b1f36, 0xf0416881, 0x60810104, 0xbf882e07, 0x0a02f06f, 0xf504d966, 0x46015080, + 0x010bf36f, 0x42b11b09, 0x4635bf8e, 0x000bf36f, 0xf0151b05, 0xbf180f04, 0x46471f2d, 0x20012100, + 0xff90f7ff, 0xd13b2800, 0xe0e8f8df, 0x4010f8ce, 0xf8ce2001, 0xf857000c, 0xf8ce0b04, 0xf8570018, + 0xf8ce0b04, 0x20080018, 0x000cf8ce, 0x0208f1a5, 0xd9332a07, 0x0b08f04f, 0x46dc482f, 0x101cf8de, + 0x0f16f011, 0xf8ded012, 0xf0200008, 0xf8ce0005, 0xf0110008, 0xbf180f02, 0x0001f06f, 0xf011d10f, + 0xbf180f04, 0x30fff04f, 0xe007d109, 0x010bea01, 0xd1014561, 0xe0022000, 0xd1df1e40, 0xb1104650, + 0xe00bb9e0, 0xf857e01c, 0xf8ce0b04, 0xf8570018, 0xf8ce0b04, 0x3a080018, 0xd8cb2a07, 0xeb081b76, + 0x442c0885, 0xd8982e07, 0x20012100, 0xff3af7ff, 0x4810b920, 0xf0216881, 0xe0000104, 0x6081e00f, + 0x480cb186, 0x1000f8d8, 0x22016104, 0x618160c2, 0x60c12108, 0x46102100, 0xff24f7ff, 0x2001b110, + 0x8df0e8bd, 0x68814803, 0x0101f021, 0x20006081, 0x8df0e8bd, 0x400c0000, 0x00989680, 0x68814803, + 0x0105f021, 0x20006081, 0x00004770, 0x400c0000, 0x00000000, +}; + +/** +* List of start and size for each size of flash sector +* The size will apply to all sectors between the listed address and the next address +* in the list. +* The last pair in the list will have sectors starting at that address and ending +* at address start + size. +*/ +static const sector_info_t sectors_info[] = { + {0, 4096}, +}; + +static const program_target_t flash = { + 0x200000B5, // Init + 0x2000029D, // UnInit + 0x20000029, // EraseChip + 0x20000061, // EraseSector + 0x20000121, // ProgramPage + 0x0, // Verify + + // BKPT : start of blob + 1 + // RSB : blob start + header + rw data offset + // RSP : stack pointer + { + 0x20000000 + 0x00000001, + 0x20000000 + 0x00000020 + 0x00000290, + 0x20000800 + }, + + 0x20000000 + 0x00000A00, // mem buffer location + 0x20000000, // location to write prog_blob in target RAM + sizeof(efm32gg_flash_prog_blob), // prog_blob size + efm32gg_flash_prog_blob, // address of prog_blob + 0x00000200 // ram_to_flash_bytes_to_be_written +};