Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
Diff: source/family/nxp/lpc54608/flash_blob.c
- Revision:
- 0:01f31e923fe2
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/source/family/nxp/lpc54608/flash_blob.c Tue Apr 07 12:55:42 2020 +0200 @@ -0,0 +1,74 @@ +/* Flash OS Routines (Automagically Generated) + * Copyright (c) 2009-2019 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +static const uint32_t lpc54608_flash_prog_blob[] = { + 0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2, + 0x21002210, 0xf8c00690, 0x4a2c2630, 0xf0236813, 0x60134380, 0x1280f8c0, 0x1284f8c0, 0x68134a28, + 0x4370f423, 0xf8c06013, 0x21021380, 0x20006001, 0x20004770, 0xb5104770, 0x2000210f, 0xf844f000, + 0xbf182800, 0x4a1fbd10, 0xe8bd210f, 0x20004010, 0xb864f000, 0x0bc4b510, 0x46084621, 0xf834f000, + 0xbf182800, 0x4a17bd10, 0xe8bd4621, 0x46084010, 0xb854f000, 0x4614b570, 0xd10e0005, 0x0100e9d4, + 0xe9d44408, 0x44111202, 0x69214408, 0x69614408, 0x69a14408, 0x42404408, 0x0be861e0, 0xf0004601, + 0x2800f813, 0xbd70bf18, 0x46214b06, 0xe8bd4628, 0xf44f4070, 0xf0007280, 0x0000b818, 0x40000500, + 0x40000400, 0x00b71b00, 0xb08bb500, 0x92002232, 0x0101e9cd, 0x46684a39, 0x4790a906, 0x28009806, + 0xf600bf18, 0xb00b10c4, 0xb500bd00, 0xf04fb08b, 0x92030c33, 0xc000f8cd, 0x0101e9cd, 0x707af44f, + 0xf0f0fbb3, 0x4a2d9004, 0xa9064668, 0x98064790, 0xbf182800, 0x10c4f600, 0xbd00b00b, 0xb08bb500, + 0x93002334, 0x0101e9cd, 0x707af44f, 0xf0f0fbb2, 0x4a229003, 0xa9064668, 0x98064790, 0xbf182800, + 0x10c4f600, 0xbd00b00b, 0xb08bb500, 0x9300233b, 0x0101e9cd, 0x707af44f, 0xf0f0fbb2, 0x4a179003, + 0xa9064668, 0x98064790, 0xbf182800, 0x10c4f600, 0xbd00b00b, 0xb08bb500, 0x92002235, 0x0101e9cd, + 0x46684a0e, 0x4790a906, 0x28009806, 0xf600bf18, 0xb00b10c4, 0xb500bd00, 0x2338b08b, 0x93009203, + 0x0101e9cd, 0x46684a05, 0x4790a906, 0x28009806, 0xf600bf18, 0xb00b10c4, 0x0000bd00, 0x03000205, + 0x00000000 +}; + +// Start address of flash +static const uint32_t flash_start = 0x00000000; +// Size of flash +static const uint32_t flash_size = 0x00080000; + +/** +* List of start and size for each size of flash sector +* The size will apply to all sectors between the listed address and the next address +* in the list. +* The last pair in the list will have sectors starting at that address and ending +* at address start + size. +*/ +static const sector_info_t sectors_info[] = { + {0x00000000, 0x00008000}, +}; + +static const program_target_t flash = { + 0x20000021, // Init + 0x20000053, // UnInit + 0x20000057, // EraseChip + 0x20000075, // EraseSector + 0x20000095, // ProgramPage + 0x0, // Verify + + // BKPT : start of blob + 1 + // RSB : blob start + header + rw data offset + // RSP : stack pointer + { + 0x20000001, + 0x200001e0, + 0x20000400 + }, + + 0x20000000 + 0x00000A00, // mem buffer location + 0x20000000, // location to write prog_blob in target RAM + sizeof(lpc54608_flash_prog_blob), // prog_blob size + lpc54608_flash_prog_blob, // address of prog_blob + 0x00000100 // ram_to_flash_bytes_to_be_written +};