Diff: examples/drvdiag/driver_wrapper/ad7790_diag.cpp

Revision:

13:66c8e4ce4ff1

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/drvdiag/driver_wrapper/ad7790_diag.cpp	Fri Apr 29 16:19:00 2016 +0300
@@ -0,0 +1,128 @@
+/**
+*   @file     ad7790_diag.cpp
+*   @brief    Source file for the AD7790 wrapper used by the driver diag
+*   @author   Analog Devices Inc.
+*
+* For support please go to:
+* Github: https://github.com/analogdevicesinc/mbed-adi
+* Support: https://ez.analog.com/community/linux-device-drivers/microcontroller-no-os-drivers
+* More: https://wiki.analog.com/resources/tools-software/mbed-drivers-all
+
+********************************************************************************
+* Copyright 2016(c) Analog Devices, Inc.
+*
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*  - Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*  - Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in
+*    the documentation and/or other materials provided with the
+*    distribution.
+*  - Neither the name of Analog Devices, Inc. nor the names of its
+*    contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*  - The use of this software may or may not infringe the patent rights
+*    of one or more patent holders.  This license does not release you
+*    from the requirement that you obtain separate licenses from these
+*    patent holders to use this software.
+*  - Use of the software either in source or binary form, must be run
+*    on or directly connected to an Analog Devices Inc. component.
+*
+* THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+* IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+* LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+********************************************************************************/
+
+#include "mbed.h"
+#include <stdio.h>
+#include <vector>
+#include <string>
+#include "AD7790_diag.h"
+
+extern Serial pc;
+extern vector<string> cmdbuffer;
+
+AD7790_Diag::AD7790_Diag(AD7790& ad) : dut(ad)
+{
+
+}
+
+void AD7790_Diag::init()
+{
+
+}
+void AD7790_Diag::reset()
+{
+    dut.reset();
+    pc.printf("Reseted AD7790");
+}
+
+void AD7790_Diag::write_mode()
+{
+    uint8_t regVal = strtol(cmdbuffer[1].c_str(), NULL, 16);
+    dut.write_mode_reg(regVal);
+    pc.printf("Wrote mode");
+}
+void AD7790_Diag::read_mode()
+{
+    pc.printf("Mode reg: %x ", dut.read_mode_reg());
+}
+
+void AD7790_Diag::write_filter()
+{
+    uint8_t regVal = strtol(cmdbuffer[1].c_str(), NULL, 16);
+    dut.write_filter_reg(regVal);
+    pc.printf("Wrote filter");
+}
+void AD7790_Diag::read_filter()
+{
+    pc.printf("Returned: %x ", dut.read_filter_reg());
+}
+void AD7790_Diag::read_data()
+{
+    pc.printf("Data reg: %x ", dut.read_data_reg());
+}
+
+void AD7790_Diag::read_status()
+{
+    pc.printf("Status reg: %x ", dut.read_status_reg());
+}
+
+void AD7790_Diag::read_u16()
+{
+    pc.printf("Data reg: %x ", dut.read_u16());
+}
+void AD7790_Diag::read_voltage()
+{
+    pc.printf("Voltage: %f ", dut.read_voltage());
+}
+void AD7790_Diag::set_continous_mode()
+{
+    uint8_t regVal = strtol(cmdbuffer[1].c_str(), NULL, 16);
+    dut.set_conversion_mode(static_cast<AD7790::AD7790Mode_t>(regVal));
+    pc.printf("Mode set to %d", regVal);
+}
+void AD7790_Diag::set_reference_voltage()
+{
+    float ref = strtof(cmdbuffer[1].c_str(), NULL);
+    dut.set_reference_voltage(ref);
+    pc.printf("Reference Voltage set to %f", ref);
+}
+
+void AD7790_Diag::set_channel()
+{
+    uint8_t regVal = strtol(cmdbuffer[1].c_str(), NULL, 16);
+    dut.set_channel(static_cast<AD7790::AD7790Channel_t>(regVal));
+    pc.printf("Mode set to %d", regVal);
+}