IIO firmware for the AD717x and AD411x family of devices.
Dependencies: sdp_k1_sdram
README.txt
- Committer:
- Janani Sunil
- Date:
- 22 months ago
- Revision:
- 3:0dcba3253ec1
- Parent:
- 1:f71de62b7179
File content as of revision 3:0dcba3253ec1:
Evaluation Boards/Products Supported ------------------------------------ EVAL-AD4111SDZ EVAL-AD4112SDZ EVAL-AD4114SDZ EVAL-AD4115SDZ EVAL-AD4116ASDZ EVAL-AD7172-2SDZ EVAL-AD7172-4SDZ EVAL-AD7173-8SDZ EVAL-AD7175-2SDZ EVAL-AD7175-8SDZ EVAL-AD7176-2SDZ EVAL-AD7177-2SDZ Overview -------- This is a IIO based firmware application to evalute the AD717x/AD411x device. This code was developed and tested on SDP-K1 controller board: https://os.mbed.com/platforms/SDP_K1/. Use of Mbed platform allows code to port on other Mbed supported target boards with little or no modifications. Product details: https://www.analog.com/en/products/ad4111.html, https://www.analog.com/en/products/ad7172-2.html Product Evaluation board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD4111.html User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ad717x_mbed_iio_support Communication Protocol: SPI Hardware Setup -------------- Required: SDP-K1 (or alternative Mbed enabled controller board), EVAL-AD717x/AD411x board and USB cable. Plug in the EVAL-AD4111 board on SDP-K1 board (or any other Mbed enabled controller board) using the SDP-120 or Arduino or PMOD on-board connector (refer software wiki page to identify suitable interface). Connect SDP-K1 board to the PC using the USB cable. How to Get Started ------------------ Create an account with Keil Studio and log in: https://www.keil.arm.com/mbed/ Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD717x-AD411x-IIO/ Instructions on how to import code are here: https://developer.arm.com/documentation/102497/1-5/Create-or-import-a-project/Import-an-Mbed-project-from-a-URL Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed instructions here: https://os.mbed.com/docs/mbed-os/v6.8/tools/getting-your-program-on-your-board.html Open Tera Term (or alternative), select 230400 baud rate, and the applicable COM port to see the list of options. Notes ----- If using Win 7, install serial drivers for Mbed. https://os.mbed.com/docs/mbed-os/v5.12/tutorials/windows-serial-driver.html A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html. Copyright (c) 2022 Analog Devices, Inc. All rights reserved.