Diff: app_config.h

Revision:

5:98a5beab11cc

Parent:

4:953fb3148f25

--- a/app_config.h	Tue Oct 29 21:42:57 2019 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,104 +0,0 @@
-/*************************************************************************//**
- *   @file   app_config.h
- *   @brief  Configuration file of AD5686 firmware example program
- *   @author ssmith (sean.smith@analog.com)
-******************************************************************************
-* Copyright (c) 2019 Analog Devices, Inc.  
-* 
-* All rights reserved.
-* 
-* Redistribution and use in source and binary forms, with or without 
-* modification, are permitted provided that the following conditions are met:
-*   - Redistributions of source code must retain the above copyright notice, 
-*     this list of conditions and the following disclaimer.
-*   - Redistributions in binary form must reproduce the above copyright notice, 
-*     this list of conditions and the following disclaimer in the documentation 
-*     and/or other materials provided with the distribution.  
-*   - Modified versions of the software must be conspicuously marked as such.
-*   - This software is licensed solely and exclusively for use with 
-*     processors/products manufactured by or for Analog Devices, Inc.
-*   - This software may not be combined or merged with other code in any manner 
-*     that would cause the software to become subject to terms and 
-*     conditions which differ from those listed here.
-*   - Neither the name of Analog Devices, Inc. nor the names of its 
-*     contributors may be used to endorse or promote products derived 
-*     from this software without specific prior written permission.
-*   - The use of this software may or may not infringe the patent rights 
-*     of one or more patent holders. This license does not release you from 
-*     the requirement that you obtain separate licenses from these patent 
-*     holders to use this software.
-* 
-* THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. AND CONTRIBUTORS "AS IS" 
-* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 
-* NON-INFRINGEMENT, TITLE, MERCHANTABILITY AND FITNESS FOR A 
-* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES, 
-* INC. OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
-* SPECIAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES 
-* (INCLUDING, BUT NOT LIMITED TO, DAMAGES ARISING OUT OF CLAIMS OF 
-* INTELLECTUAL PROPERTY RIGHTS INFRINGEMENT; PROCUREMENT OF SUBSTITUTE 
-* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
-* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
-* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
-* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
-* POSSIBILITY OF SUCH DAMAGE.
-* 
-* 20180927-7CBSD SLA
-*****************************************************************************/
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-#include <stdint.h>
-#include "platform_drivers.h"
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-#ifdef __cplusplus
-#include "ad5933.h"
-}
-#endif
-
-
-#define  ARDUINO
-
-
-/**
-  The ADI SDP_K1 can be used with both arduino headers
-  or the 120-pin SDP connector found on ADI evaluation
-  boards. The default is the SDP connector
-
-  Uncomment the ARDUINO #define above to enable the ARDUINO connector
-
-*/
-//#warning  check this
-#ifdef ARDUINO
-	#define I2C_SCL     D15
-	#define I2C_SDA     D14
-
-	#define SPI_CS		D10
-	#define SPI_MISO	D12
-	#define SPI_MOSI	D11
-	#define SPI_SCK		D13
-
-	#define GAIN_PIN	D8 
-	#define RESET_PIN	D9 
-	#define LDAC_PIN	D7 
-	#define ADDR0_PIN	D6 
-#else
-	
-	#define I2C_SCL     SDP_I2C_SCL
-	#define I2C_SDA     SDP_I2C_SDA
-
-	#define SPI_CS		SDP_SPI_CS_A
-	#define SPI_MISO	SDP_SPI_MISO
-	#define SPI_MOSI	SDP_SPI_MOSI
-	#define SPI_SCK		SDP_SPI_SCK
-
-	#define GAIN_PIN	SDP_GPIO_0
-	#define RESET_PIN	SDP_GPIO_2
-	#define LDAC_PIN	SDP_GPIO_3
-	#define ADDR0_PIN	SDP_GPIO_4
-#endif
-
-#endif //_APP_CONFIG_H_