EVAL-AD593x Mbed Project.
Dependencies: platform_drivers
Diff: README.txt
- Revision:
- 5:98a5beab11cc
- Parent:
- 3:0ac30e539fc7
--- a/README.txt Tue Oct 29 21:42:57 2019 +0000 +++ b/README.txt Wed Oct 13 11:14:40 2021 +0100 @@ -4,80 +4,42 @@ AD5934 Recommended Evaluation Board DIGILENT PMOD 1A - - + Overview -------- -These code files provide drivers to interface with Analog Devices family of -impedance-converters listed above and communicate with any compatable evaluation board. -This code was developed and tested on SDP-K1 controller board -https://os.mbed.com/platforms/SDP_K1/ and used the Digilent PMOD 1A board for testing. - +These code files provide the console application and device libraries to +interface with AD5933/AD5934 EVAL boards. This code was developed and tested on SDP-K1 +controller board: https://os.mbed.com/platforms/SDP_K1/ and and used the Digilent PMOD 1A board for testing. + Product details: https://www.analog.com/en/products/ad5933.html +Eval board details: https://reference.digilentinc.com/reference/pmod/pmodia/start?_ga=2.247997262.874832523.1572350909-1020412841.1562671075 User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ad5933-mbed -Digilent PMOD 1A: https://reference.digilentinc.com/reference/pmod/pmodia/start?_ga=2.247997262.874832523.1572350909-1020412841.1562671075 +Communication Protocol: I2C Hardware Setup -------------- -Required: SDP-K1 (or alternative MBED-enabled controller board), evaluation-board - recommend Digilent PMOD 1A, +Required: SDP-K1 (or alternative MBED enabled controller board), recommend Digilent PMOD 1A, USB cable. -Connect the SPI port on the SDP-K1 board (or any other Mbed enabled +Connect the I2C port on the SDP-K1 board (or any other Mbed enabled controller board) using short jumper-wires. Connect SDP-K1 board to the PC using the USB cable. - - + + How to Get Started ------------------ Open Mbed online compiler. https://ide.mbed.com/compiler -Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD593x/ -instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v5.12/tools/importing-code.html -Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed -instructions here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html -Open Tera Term (or alternative), select 115200 baud rate, and the applicable COM -port to see the list of options. +Import Code into compiler. Instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v6.8/quick-start/build-with-the-online-compiler.html +Compile code to generate binary file and then drag and drop binary into SDP-K1 controller board. Detailed instructions are here: +https://os.mbed.com/docs/mbed-os/v6.8/build-tools/getting-your-program-on-your-board.html - +Refer project wiki page to find detailed guide on how to use firmware: +https://wiki.analog.com/resources/tools-software/product-support-software/ad5933-mbed + + Notes ----- -If using Win 7, install serial drivers for Mbed. https://os.mbed.com/docs/mbed-os/v5.12/tutorials/windows-serial-driver.html +Refer this page for latest documentation on Mbed-OS: https://os.mbed.com/docs/mbed-os/v6.8/introduction/index.html A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html. - -License -------- -Copyright (c) 2019 Analog Devices, Inc. All rights reserved. - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation - and/or other materials provided with the distribution. - - Modified versions of the software must be conspicuously marked as such. - - This software is licensed solely and exclusively for use with processors/products - manufactured by or for Analog Devices, Inc. - - This software may not be combined or merged with other code in any manner - that would cause the software to become subject to terms and conditions which - differ from those listed here. - - Neither the name of Analog Devices, Inc. nor the names of its contributors - may be used to endorse or promote products derived from this software without - specific prior written permission. - - The use of this software may or may not infringe the patent rights of one or - more patent holders. This license does not release you from the requirement - that you obtain separate licenses from these patent holders to use this software. - -THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, -TITLE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -NO EVENT SHALL ANALOG DEVICES, INC. OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, -INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, DAMAGES ARISING OUT OF CLAIMS OF INTELLECTUAL -PROPERTY RIGHTS INFRINGEMENT; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, -EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -2019-01-10-7CBSD SLA \ No newline at end of file +Copyright (c) 2021 Analog Devices, Inc. All rights reserved. \ No newline at end of file