Diff: README.txt

Revision:

3:0ac30e539fc7

Parent:

2:e1ded67fedf9

Child:

5:98a5beab11cc

--- a/README.txt	Mon Sep 16 14:22:51 2019 +0000
+++ b/README.txt	Tue Oct 29 12:16:41 2019 +0000
@@ -8,17 +8,19 @@
 
 Overview
 --------
-These code files provide drivers to interface with nanoDAC+ family of devices 
-listed above and communicate with EVAL-AD56XX board. This code was developed and 
-tested on SDP-K1 controller board https://os.mbed.com/platforms/SDP_K1/. 
+These code files provide drivers to interface with Analog Devices family of
+impedance-converters listed above and communicate with any compatable evaluation board.
+This code was developed and tested on SDP-K1 controller board 
+https://os.mbed.com/platforms/SDP_K1/ and used the Digilent PMOD 1A board for testing.
 
 Product details: https://www.analog.com/en/products/ad5933.html
 User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ad5933-mbed
+Digilent PMOD 1A: https://reference.digilentinc.com/reference/pmod/pmodia/start?_ga=2.247997262.874832523.1572350909-1020412841.1562671075
 
 
 Hardware Setup
 --------------
-Required: SDP-K1 (or alternative MBED enabled controller board), evaluation-board - recommend Digilent PMOD 1A, 
+Required: SDP-K1 (or alternative MBED-enabled controller board), evaluation-board - recommend Digilent PMOD 1A, 
 USB cable.
 Connect the SPI port on the SDP-K1 board (or any other Mbed enabled 
 controller board) using short jumper-wires.
@@ -32,7 +34,7 @@
 instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v5.12/tools/importing-code.html
 Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed 
 instructions here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html
-Open Tera Term (or alternative), select 51200 baud rate, and the applicable COM 
+Open Tera Term (or alternative), select 115200 baud rate, and the applicable COM 
 port to see the list of options.