Example program for EVAL-AD4130
Dependencies: tempsensors sdp_k1_sdram
README.txt
- Committer:
- Mahesh Phalke
- Date:
- 21 months ago
- Revision:
- 2:7b2b268ea49c
- Parent:
- 0:ad93df57f473
File content as of revision 2:7b2b268ea49c:
Evaluation Boards/Products Supported ------------------------------------ -Products supported: AD4130 Overview -------- This is an IIO ecosystem based firmware application to evalute the AD4130 devices. This code was developed and tested on SDP-K1 controller board: https://os.mbed.com/platforms/SDP_K1/. Use of Mbed platform allows code to port on other Mbed supported target boards with little or no modifications. Product details: AD4130-8 Product Evaluation board details: EVAL-AD4130-8WARDZ User Guide for this code: https://wiki.analog.com/resources/eval/user-guides/ad4130/mbed_iio_app Communication Protocol: SPI Hardware Setup -------------- Required: SDP-K1 (or alternative Mbed enabled controller board), EVAL-AD4130 board and USB cable. Plug in the EVAL-AD4130 board on SDP-K1 board (or any other Mbed enabled controller board) using the Arduino connector (refer software wiki page for connection interface). Connect SDP-K1 board to the PC using the USB cable. AD4130 EVB is powered through USB supply of SDP-K1. How to Get Started ------------------ Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. Find detailed instructions here: https://developer.arm.com/documentation/102497/1-5/Arm-Keil-Studio Notes ----- A detailed user guide on SDP-K1 controller board is available here: https://os.mbed.com/platforms/SDP_K1/ https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html. Copyright (c) 2022 Analog Devices, Inc. All rights reserved.