Diff: README.txt

Revision:

2:7b2b268ea49c

Parent:

0:ad93df57f473

--- a/README.txt	Mon May 24 09:13:12 2021 +0000
+++ b/README.txt	Wed Jul 20 18:12:00 2022 +0530
@@ -1,45 +1,41 @@
 Evaluation Boards/Products Supported
 ------------------------------------ 
-EVAL-AD1234 (AD1234)
-EVAL-AD1256 (AD1256)
-<< add more here >>
- 
+-Products supported: AD4130
+
+
 Overview
 --------
-These code files provide drivers to interface with AD1234 and communicate with 
-EVAL-AD1234 board. This code was developed and tested on SDP-K1 controller board 
-https://os.mbed.com/platforms/SDP_K1/. 
- 
-Product details: https://www.analog.com/en/products/ad1234.html
-Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD1234.html
- 
- 
+This is an IIO ecosystem based firmware application to evalute the AD4130 devices.
+This code was developed and tested on SDP-K1 controller board: https://os.mbed.com/platforms/SDP_K1/.
+Use of Mbed platform allows code to port on other Mbed supported target boards with little or no modifications.
+
+Product details: AD4130-8
+Product Evaluation board details: EVAL-AD4130-8WARDZ
+User Guide for this code: https://wiki.analog.com/resources/eval/user-guides/ad4130/mbed_iio_app
+Communication Protocol: SPI
+
+
 Hardware Setup
 --------------
-Required: SDP-K1, EVAL-AD1234, USB cable, 12 V power supply, 60 MHz external 
-clock supply.
-Plug in the EVAL-AD124 board on SDP-K1 board (or any other Mbed enabled 
-controller board) using the SDP connector and screws.
-Connect SDP-K1 board to the PC using the USB cable.
- 
- 
+Required: SDP-K1 (or alternative Mbed enabled controller board), EVAL-AD4130 board and USB cable.
+Plug in the EVAL-AD4130 board on SDP-K1 board (or any other Mbed enabled controller board)
+using the Arduino connector (refer software wiki page for connection interface).
+Connect SDP-K1 board to the PC using the USB cable. AD4130 EVB is powered through USB supply of SDP-K1.
+
+
 How to Get Started
 ------------------
-Open Mbed online compiler. https://ide.mbed.com/compiler
-Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD1234/
-instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v5.12/tools/importing-code.html
-Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed instructions 
-here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html
-Open Tera Term (or alternative), select 9600 baud rate, and the applicable COM port to see the 
-list of options.
- 
-A detailed user guide on how to use SDP-K1 board on Mbed platform is available 
-here: https://wiki.analog.com/resources/tools-software/mbed
- 
- 
+Mbed web/online compiler: https://studio.keil.arm.com/auth/login/
+Import code into compiler and compile it to generate executable binary file. 
+Drag and drop binary file into USB drive hosted by SDP-K1 controller board. 
+Find detailed instructions here: https://developer.arm.com/documentation/102497/1-5/Arm-Keil-Studio
+
+
 Notes
 -----
-If using Win 7, install serial drivers for Mbed. https://os.mbed.com/docs/mbed-os/v5.12/tutorials/windows-serial-driver.html
-A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html.
- 
-            
\ No newline at end of file
+A detailed user guide on SDP-K1 controller board is available here:
+https://os.mbed.com/platforms/SDP_K1/
+https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html.
+
+
+Copyright (c) 2022 Analog Devices, Inc.  All rights reserved.