File content as of revision 11:a7e099ee909e:

/**
 ******************************************************************************
 * @file    main.cpp
 * @author  IPC Rennes
 * @version V1.0.0
 * @date    April 13th, 2016
 * @brief   mbed simple application for the STMicroelectronics X-NUCLEO-IHM05A1
 *          Motor Control Expansion Board: control of 1 motor.
 ******************************************************************************
 * @attention
 *
 * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *   1. Redistributions of source code must retain the above copyright notice,
 *      this list of conditions and the following disclaimer.
 *   2. Redistributions in binary form must reproduce the above copyright notice,
 *      this list of conditions and the following disclaimer in the documentation
 *      and/or other materials provided with the distribution.
 *   3. Neither the name of STMicroelectronics nor the names of its contributors
 *      may be used to endorse or promote products derived from this software
 *      without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 ******************************************************************************
 */

/* Includes ------------------------------------------------------------------*/

/* mbed specific header files. */
#include "mbed.h"

/* Component specific header files. */
#include "L6208.h"

 DigitalIn myButton(USER_BUTTON);
 DigitalIn Input (PC_0);

/* Definitions ---------------------------------------------------------------*/
#ifdef TARGET_NUCLEO_F334R8
#define VREFA_PWM_PIN D11
#define VREFB_PWM_PIN D9
#elif TARGET_NUCLEO_F302R8
#define VREFA_PWM_PIN D11
#define VREFB_PWM_PIN D15 /* HW mandatory patch: bridge manually D9 with D15 */
#else
#define VREFA_PWM_PIN D3
#define VREFB_PWM_PIN D9
#endif

Serial pc(SERIAL_TX, SERIAL_RX);

/* Variables -----------------------------------------------------------------*/

/* Initialization parameters of the motor connected to the expansion board. */
l6208_init_t init =
{
 
  1500,            //Acceleration rate in step/s^2 or (1/16)th step/s^2 for microstep modes
  20,              //Acceleration current torque in % (from 0 to 100)
  1500,            //Deceleration rate in step/s^2 or (1/16)th step/s^2 for microstep modes
  30,              //Deceleration current torque in % (from 0 to 100)
  1500,            //Running speed in step/s or (1/16)th step/s for microstep modes
  50,              //Running current torque in % (from 0 to 100)
  20,              //Holding current torque in % (from 0 to 100)
  STEP_MODE_1_16,  //Step mode via enum motorStepMode_t
  FAST_DECAY,      //Decay mode via enum motorDecayMode_t
  0,               //Dwelling time in ms
  FALSE,           //Automatic HIZ STOP
  100000           //VREFA and VREFB PWM frequency (Hz)
};

/* Motor Control Component. */
L6208 *motor;

/* Functions -----------------------------------------------------------------*/

/**
 * @brief  This is an example of user handler for the flag interrupt.
 * @param  None
 * @retval None
 * @note   If needed, implement it, and then attach and enable it:
 *           + motor->attach_flag_irq(&my_flag_irq_handler);
 *           + motor->enable_flag_irq();
 *         To disable it:
 *           + motor->DisbleFlagIRQ();
 */
void my_flag_irq_handler(void)
{
  pc.printf("    WARNING: \"FLAG\" interrupt triggered:\r\n");
  motor->disable();
  pc.printf("    Motor disabled.\r\n\n");
}

/**
 * @brief  This is an example of error handler.
 * @param[in] error Number of the error
 * @retval None
 * @note   If needed, implement it, and then attach it:
 *           + motor->attach_error_handler(&my_error_handler);
 */
void my_error_handler(uint16_t error)
{
  /* Printing to the console. */
  pc.printf("Error %d detected\r\n\n", error);
  
  /* Infinite loop */
  while (true) {
  }    
}

/* Main ----------------------------------------------------------------------*/

int main()
{
  // configura velocità della comunicazione seriale su USB-VirtualCom e invia messaggio di benvenuto
  pc.baud(921600); //921600 bps
  //pc.baud(9600); //256000 bps
  pc.printf("*** Test Motor ***\n\r");
  
  /* Printing to the console. */
  pc.printf("STARTING MAIN PROGRAM\r\n");
  pc.printf("    Reminder:\r\n");
  pc.printf("    The position unit is in agreement to the step mode.\r\n");
  pc.printf("    The speed, acceleration or deceleration unit depend on the step mode:\r\n");
  pc.printf("    - For normal mode and half step mode, the unit is steps/s or /s^2.\r\n");
  pc.printf("    - For microstep modes, the unit is (1/16)steps/s or /s^2.\r\n");
    
//----- Initialization 
  /* Initializing Motor Control Component. */
  motor = new L6208(D2, D8, D7, D4, D5, D6, VREFA_PWM_PIN, VREFB_PWM_PIN);
  if (motor->init(&init) != COMPONENT_OK) {
    exit(EXIT_FAILURE);
  }

  /* Attaching and enabling an interrupt handler. */
  motor->attach_flag_irq(&my_flag_irq_handler);
  motor->enable_flag_irq();
    
  /* Attaching an error handler */
  motor->attach_error_handler(&my_error_handler);

  /* Printing to the console. */
  pc.printf("Motor Control Application Example for 1 Motor\r\n");

//----- run the motor BACKWARD
  pc.printf("--> Running the motor backward.\r\n");
  motor->run(StepperMotor::BWD);
  
 

  
//----- Soft stop required while running
  pc.printf("--> Soft stop requested.\r\n");
  motor->soft_stop(); 
  
  
//----- Change step mode to full step mode
  motor->set_step_mode(StepperMotor::STEP_MODE_FULL);
  pc.printf("    Motor step mode: %d (0:FS, 1:1/2, 2:1/4, 3:1/8, 4:1/16).\r\n", motor->get_step_mode());
  
  /* Get current position of device and print to the console */
  pc.printf("    Position: %d.\r\n", motor->get_position());
  
  /* Set speed, acceleration and deceleration to scale with normal mode */
  motor->set_max_speed(init.maxSpeedSps>>4);
  motor->set_acceleration(motor->get_acceleration()>>4);
  motor->set_deceleration(motor->get_deceleration()>>4);
  /* Print parameters to the console */  
  pc.printf("    Motor Max Speed: %d step/s.\r\n", motor->get_max_speed());
  pc.printf("    Motor Min Speed: %d step/s.\r\n", motor->get_min_speed());
  pc.printf("    Motor Acceleration: %d step/s.\r\n", motor->get_acceleration());
  pc.printf("    Motor Deceleration: %d step/s.\r\n", motor->get_deceleration());
  
//----- move of 200 steps in the FW direction
  pc.printf("--> Moving forward 200 steps.\r\n");
  motor->move(StepperMotor::FWD, 200);
int i,a=0;
  
  while (true) {
  
 /* if ( Input == 0 ) 
  {
     a=a+1;
   }
   if(a>1)
   {
    a=0;
     
   }*/
         
     if(myButton==0)
     {
        /* Request device to go position -3200 */
        motor->go_to(150);
        /* Waiting while the motor is active. */
       motor->wait_while_active();
    }
    else 
    {
        /* Request device to go position -3200 */
     motor->go_to(-150);
     /* Waiting while the motor is active. */
     motor->wait_while_active();
  
    }
    

}
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/