LMiC LoRa Semtech + Nucleo version sending every 10secs

Dependents:   LoRaWAN-test-10secs

Fork of LMiC by Alcatel-Lucent IoT Development

Revision:
4:663db54d46eb
Parent:
3:1079dc4b4c59
Child:
5:74acff269a3d
--- a/lmic.cpp	Mon Nov 23 09:53:54 2015 +0000
+++ b/lmic.cpp	Mon Dec 14 10:46:06 2015 +0000
@@ -967,8 +967,8 @@
 
 
 static bit_t decodeFrame (void) {
-    debug_str("decodeFrame: ");
-    debug_buf(LMIC.frame, LMIC.dataLen);
+    //debug_str("decodeFrame: ");
+    //debug_buf(LMIC.frame, LMIC.dataLen);
     xref2u1_t d = LMIC.frame;
     u1_t hdr    = d[0];
     u1_t ftype  = hdr & HDR_FTYPE;
@@ -995,8 +995,8 @@
     int  poff  = OFF_DAT_OPTS+olen;
     int  pend  = dlen-4;  // MIC
     
-    debug_val("fct: ", fct);
-    debug_val("olen: ", olen);
+    //debug_val("fct: ", fct);
+    //debug_val("olen: ", olen);
 
     if( addr != LMIC.devaddr ) {
         EV(specCond, WARN, (e_.reason = EV::specCond_t::ALIEN_ADDRESS,
@@ -1073,7 +1073,7 @@
 
     xref2u1_t opts = &d[OFF_DAT_OPTS];
     int oidx = 0;
-    debug_val("Port: ", port);
+    //debug_val("Port: ", port);
     while( oidx < olen ) {
 //      debug_str("Port: ");
         debug_str("Process OPTS...");
@@ -1114,8 +1114,8 @@
             }
             LMIC.adrChanged = 1;  // Trigger an ACK to NWK
             
-            debug_str("decodeFrame: ");
-            debug_buf(LMIC.frame, LMIC.dataLen);
+            //debug_str("decodeFrame: ");
+            //debug_buf(LMIC.frame, LMIC.dataLen);
 
             continue;
         }
@@ -1233,7 +1233,7 @@
 
         if( port == 0  &&  pend-poff > 0 )
         {
-            debug_str("Payload decrypting...\r\n");
+            //debug_str("Payload decrypting...\r\n");
             aes_cipher(port <= 0 ? LMIC.nwkKey : LMIC.artKey, LMIC.devaddr, seqno, /*dn*/1, d+poff, pend-poff);
         }
         
@@ -1279,18 +1279,18 @@
         LMIC.dataBeg = poff;
         LMIC.dataLen = pend-poff;
     }
-    debug_str("decodeFrame End: ");
-    debug_buf(LMIC.frame, LMIC.dataLen);
+    //debug_str("decodeFrame End: ");
+    //debug_buf(LMIC.frame, LMIC.dataLen);
 
 //  PANY
     if ((port == 0) && (olen == 0))
     { 
         oidx = 0;
         olen = LMIC.dataLen;
-        debug_str("Port 0!!!\r\n");
+        //debug_str("Port 0!!!\r\n");
         opts = LMIC.frame + LMIC.dataBeg;
         
-        debug_val("Data Len: ", LMIC.dataLen);
+        //debug_val("Data Len: ", LMIC.dataLen);
         while( oidx < olen ) {
     //      debug_str("Port: ");
             debug_str("Process OPTS...");
@@ -1331,8 +1331,8 @@
                 }
                 LMIC.adrChanged = 1;  // Trigger an ACK to NWK
                 
-                debug_str("decodeFrame: ");
-                debug_buf(LMIC.frame, LMIC.dataLen);
+                //debug_str("decodeFrame: ");
+                //debug_buf(LMIC.frame, LMIC.dataLen);
     
                 continue;
             }
@@ -1680,7 +1680,7 @@
 
 
 static void buildDataFrame (void) {
-    debug_str("buildDataFrame\r\n");
+    //debug_str("buildDataFrame\r\n");
     bit_t txdata = ((LMIC.opmode & (OP_TXDATA|OP_POLL)) != OP_POLL);
     u1_t dlen = txdata ? LMIC.pendTxLen : 0;
 
@@ -2075,6 +2075,8 @@
 
 // Decide what to do next for the MAC layer of a device
 static void engineUpdate (void) {
+    
+//    debug_str("Engine Update\r\n");
     // Check for ongoing state: scan or TX/RX transaction
     if( (LMIC.opmode & (OP_SCAN|OP_TXRXPEND|OP_SHUTDOWN)) != 0 ) 
         return;
@@ -2286,17 +2288,24 @@
 void LMIC_setTxData (void) {
     LMIC.opmode |= OP_TXDATA;
     if( (LMIC.opmode & OP_JOINING) == 0 )
+    {
         LMIC.txCnt = 0;             // cancel any ongoing TX/RX retries
+    }
     engineUpdate();
 }
 
 
 //
 int LMIC_setTxData2 (u1_t port, xref2u1_t data, u1_t dlen, u1_t confirmed) {
+/*    debug_val("Data Length: ", dlen);
+    debug_val("Data Length: ", SIZEOFEXPR(LMIC.pendTxData));*/
     if( dlen > SIZEOFEXPR(LMIC.pendTxData) )
         return -2;
     if( data != (xref2u1_t)0 )
+    {
         os_copyMem(LMIC.pendTxData, data, dlen);
+    }
+    //debug_str("Send Data\r\n");
     LMIC.pendTxConf = confirmed;
     LMIC.pendTxPort = port;
     LMIC.pendTxLen  = dlen;