Revision 4:81c6b9d73cb1, committed 2014-12-12

Comitter:

mchowla

Date:

Fri Dec 12 22:26:35 2014 +0000

Parent:

3:9736a8776102

Commit message:

Initial Version of MultiTech Socket Modem Example

Changed in this revision

--- a/main.cpp	Tue Oct 28 19:09:28 2014 +0000
+++ b/main.cpp	Fri Dec 12 22:26:35 2014 +0000
@@ -1,6 +1,6 @@
 /* This is an example program which reads in the 3-axis acceleration, pressure, and temperature data from
  * a FRDM-FXS-MULTI sensor board. It then uses an MTSAS SocketModem Shield board to send the read data over
- * a cellular connection to the 2lemetry cloud using an MQTT client protocol.
+ * a cellular connection to Aeris AerCloud using an MQTT client protocol.
  */
 
 #include "mbed.h"
@@ -9,34 +9,45 @@
 #include "FXLS8471Q.h"
 #include "MPL3115A2.h"
 
-/* PLEASE READ THIS!
- * The following fields must be populated in order to properly send data to the "Default ThingFabric Project" in your 2lemetry account using the MQTT client
- * You must have a hacker (or higher) account at http://app.thingfabric.com
- * After you register and login, follow the steps below to set up your client
- * Click on "Default ThingFabric Project"
- *      Set _2LEMETRY_DOMAIN to the string after "Project" at the top of the page
- * Click on "Credentials"
- * Click on "Default ThingFabric Credential"
- *      Set _2LEMETRY_USER_ID to the value in the "Key (Username)" field
- *      Set _2LEMETRY_TOKEN to the value in the "MD5 Secret" field
- * If you are running this code on multiple devices, you will want to make the _2LEMETRY_DEVICE_ID field unique for each device
- * Set the _APN field to the APN provided with your sim card
- * Build, flash, and run
- *      This code sends a random integer value approximately every 30 seconds
- * Click on "Default ThingFabric Project"
- * Click on "Analytics"
- * You should be able to see your test data (page needs to be refreshed periodically, it doesn't automatically refresh)
- */
+//
+// PLEASE READ THIS!
+//
+// Example was created for the following hardware:
+//   ST Nucleo F401RE   http://developer.mbed.org/platforms/ST-Nucleo-F401RE/
+//   Freescale Multi-Sensor Shield https://developer.mbed.org/components/Freescale-Multi-Sensor-Shield/
+//   MultiTech Socket Modem Shield: http://developer.mbed.org/components/Multi-Tech-SocketModem-Arduino-Shield-MT/
+//   MultiTech MTSMC-H5 GSM Socket Modem http://www.multitech.com/models/92503252LF#gsc.tab=0
+//
+// To get the sample running, you'll need to fill in the following parameters below
+//   Your cellular provider's APN: _APN
+//   AerCloud API Key: _AERCLOUD_API_APIKEY
+//   AerCloud Account ID: _AERCLOUD_ACCOUNT_ID
+//   AerCloud Container: _ACERCLOUD_CONTAINER
+//
+// The AerCloud container needa a Data Model with the following schema:
+//    accel_x  FLOAT
+//    accel_y  FLOAT 
+//    accel-Z  FLOAT
+//    pressure FLOAT
+//    temperature FLOAT
+//
+// To check if data has made it in the container, create a long polling subscription in AerPort and they use the following url in your browswer
+//
+// http://longpoll.aercloud.aeris.com/v1/1/containers/subscriptions/<subscrption_name>/notificationChannels/longPoll?apiKey=<api_key>
+//
+// You should see the something that looks like this in the browser:
+// {"sclContentInstances":[{"sclId":"nucleo-0001","containerId":"Nucleo_Test","contentInstance":{"id":"a40c8e60-8248-11e4-8b38-0677f0dfdf5e","contentSize":90,"creationTime":1418420922950,"content":{"contentType":"application/json","contentTypeBinary":"{\"x\":0.005615,\"y\":-0.041260,\"z\":1.015137,\"pressure\":101098.500000,\"temperature\":25.125000}"}}},
+//
+//
 
-char _2LEMETRY_USERID[] = "";
-char _2LEMETRY_TOKEN[] = "";
-char _2LEMETRY_DOMAIN[] = "";
-char _2LEMETRY_STUFF[] = "mbed";
-char _2LEMETRY_DEVICE_ID[] = "nucleo-0001";
+char _AERCLOUD_API_KEY[] = "SET_YOUR_API_KEY";
+char _AERCLOUD_ACCOUNT_ID[] = "SET_YOUR_ACCOUNT_NUMBER";
+char _AERCLOUD_CONTAINER[] = "Nucleo_Test";
+char _AERCLOUD_DEVICE_ID[] = "nucleo-0001";
 
-char _APN[] = "";
+char _APN[] = "SET_YOUR_CELLULAR_PROVIDERS_APN" ";
 
-char _host[] = "q.mq.tt";
+char _host[] = "mqtt.aercloud.aeris.com";
 int _port = 1883;
 
 #define MPL3115A2_I2C_ADDRESS (0x60<<1)
@@ -48,6 +59,7 @@
 }
 
 int main() {
+    printf("Hello World\r\n");
     MTSLog::setLogLevel(MTSLog::TRACE_LEVEL);
     
     // for Nucleo boards
@@ -73,11 +85,25 @@
         wait(2);
     }
     
+    printf("Signal Strength: %d\n\r", radio->getSignalStrength()); //Check the signal strength should be above 8
+    
+    // If you suspect a connectivity issue, uncomment the code below and if ping works.  If you are not getting a
+    //  valid ping, there's a connectivity problem.  First step is to verify you've got the right APN set
+    //
+    // Try pinging default server "8.8.8.8" (Google's DNS)
+    //int ping_valid = 0;
+    //while (ping_valid == 0) {
+    //    ping_valid = radio->ping();
+    //    printf("Ping Valid: %s\n\r", ping_valid ? "true" : "false");
+    //    
+    //    if (ping_valid == 0) {
+    //        wait(3);
+    //    }
+    //}
+    
     PubSubClient mqtt(_host, _port, callback);
     
-    char topicStr[128];
     char buf[128];
-    snprintf(topicStr, sizeof(topicStr), "%s/%s/%s", _2LEMETRY_DOMAIN, _2LEMETRY_STUFF, _2LEMETRY_DEVICE_ID);
     
     FXLS8471Q acc(D11, D12, D13, D10);
     MPL3115A2 alt(D14, D15, MPL3115A2_I2C_ADDRESS, D4, D3);
@@ -86,8 +112,9 @@
     float acc_data[3];
     
     while (true) {
-        if (! mqtt.connect(_2LEMETRY_DEVICE_ID, _2LEMETRY_USERID, _2LEMETRY_TOKEN)) {
-            logError("failed to connect to 2lemetry server");
+        if (! mqtt.connect(_AERCLOUD_DEVICE_ID, _AERCLOUD_ACCOUNT_ID, _AERCLOUD_API_KEY)) {
+            logError("failed to connect to AerCloud Server");
+            wait(5);
             continue;
         }
         
@@ -95,7 +122,7 @@
         
         snprintf(buf, sizeof(buf), "{\"x\":%f,\"y\":%f,\"z\":%f,\"pressure\":%f,\"temperature\":%f}", acc_data[0],acc_data[1],acc_data[2], alt.getPressure(), alt.getTemperature());
         logInfo("publishing: [%s]", buf);
-        if (! mqtt.publish(topicStr, buf)) {
+        if (! mqtt.publish(_AERCLOUD_CONTAINER, buf)) {
             logError("failed to publish: [%s]", buf);
         }
         wait(1);

--- a/mbed.bld	Tue Oct 28 19:09:28 2014 +0000
+++ b/mbed.bld	Fri Dec 12 22:26:35 2014 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/cb3d968589d8
\ No newline at end of file
+http://mbed.org/users/mbed_official/code/mbed/builds/4fc01daae5a5
\ No newline at end of file

--- a/mtsas.lib	Tue Oct 28 19:09:28 2014 +0000
+++ b/mtsas.lib	Fri Dec 12 22:26:35 2014 +0000
@@ -1,1 +1,1 @@
-http://developer.mbed.org/teams/Multi-Hackers/code/mtsas/#45f3c6dbd646
+http://developer.mbed.org/teams/Multi-Hackers/code/mtsas/