Generic Pelion Device Management example for various Advantech modules.

This example is known to work great on the following platforms:

Example Functionality

This example showcases the following device functionality:

  • On timer button increment, simulate Pelion LWM2M button resource change

Use this example with Mbed CLI

1. Import the application into your desktop:

mbed import https://os.mbed.com/teams/Advantech/code/pelion-example-common
cd pelion-example-common

2. Download your developer certificate from pelion portal

3. Compile the program

mbed compile -t <toolchain> -m <TARGET_BOARD>

(supported toolchains : GCC_ARM / ARM / IAR)

4. Copy the binary file pelion-example-common.bin to your mbed device.

drivers/storage/MySystemStorage.cpp

Committer:
chuanga
Date:
2019-03-12
Revision:
0:43ff9e3bc244

File content as of revision 0:43ff9e3bc244:

/*
 * Copyright (c) 2018 ARM Limited. All rights reserved.
 * SPDX-License-Identifier: Apache-2.0
 * Licensed under the Apache License, Version 2.0 (the License); you may
 * not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "BlockDevice.h"
#include "FileSystem.h"
#include "FATFileSystem.h"
#include "LittleFileSystem.h"

#if COMPONENT_SPIF
#include "SPIFBlockDevice.h"
#endif

#if COMPONENT_QSPIF
#include "QSPIFBlockDevice.h"
#endif

#if COMPONENT_DATAFLASH
#include "DataFlashBlockDevice.h"
#endif

#if COMPONENT_SD
#include "SDBlockDevice.h"
#endif

#if COMPONENT_FLASHIAP
#include "FlashIAPBlockDevice.h"
#endif

#if COMPONENT_NUSD
#include "NuSDBlockDevice.h"
#endif

using namespace mbed;

// Align a value to a specified size.
// Parameters :
// val           - [IN]   Value.
// size          - [IN]   Size.
// Return        : Aligned value.
static inline uint32_t align_up(uint32_t val, uint32_t size)
{
    return (((val - 1) / size) + 1) * size;
}

BlockDevice *BlockDevice::get_default_instance()
{
#if COMPONENT_SPIF

    static SPIFBlockDevice default_bd(
        MBED_CONF_SPIF_DRIVER_SPI_MOSI,
        MBED_CONF_SPIF_DRIVER_SPI_MISO,
        MBED_CONF_SPIF_DRIVER_SPI_CLK,
        MBED_CONF_SPIF_DRIVER_SPI_CS,
        MBED_CONF_SPIF_DRIVER_SPI_FREQ
    );

    return &default_bd;

#elif COMPONENT_QSPIF

    static QSPIFBlockDevice default_bd(
        MBED_CONF_QSPIF_QSPI_IO0,
        MBED_CONF_QSPIF_QSPI_IO1,
        MBED_CONF_QSPIF_QSPI_IO2,
        MBED_CONF_QSPIF_QSPI_IO3,
        MBED_CONF_QSPIF_QSPI_SCK,
        MBED_CONF_QSPIF_QSPI_CSN,
        MBED_CONF_QSPIF_QSPI_POLARITY_MODE,
        MBED_CONF_QSPIF_QSPI_FREQ
    );

    return &default_bd;

#elif COMPONENT_DATAFLASH

    static DataFlashBlockDevice default_bd(
        MBED_CONF_DATAFLASH_SPI_MOSI,
        MBED_CONF_DATAFLASH_SPI_MISO,
        MBED_CONF_DATAFLASH_SPI_CLK,
        MBED_CONF_DATAFLASH_SPI_CS
    );

    return &default_bd;

#elif COMPONENT_SD

    static SDBlockDevice default_bd(
        MBED_CONF_SD_SPI_MOSI,
        MBED_CONF_SD_SPI_MISO,
        MBED_CONF_SD_SPI_CLK,
        MBED_CONF_SD_SPI_CS
    );

    return &default_bd;

#elif COMPONENT_NUSD

    static NuSDBlockDevice default_bd;

    return &default_bd;

#elif COMPONENT_FLASHIAP

#if (MBED_CONF_FLASHIAP_BLOCK_DEVICE_SIZE == 0) && (MBED_CONF_FLASHIAP_BLOCK_DEVICE_BASE_ADDRESS == 0xFFFFFFFF)

    size_t flash_size;
    uint32_t start_address;
    uint32_t bottom_address;
    FlashIAP flash;

    int ret = flash.init();
    if (ret != 0) {
        return 0;
    }

    //Find the start of first sector after text area
    bottom_address = align_up(FLASHIAP_ROM_END, flash.get_sector_size(FLASHIAP_ROM_END));
    start_address = flash.get_flash_start();
    flash_size = flash.get_flash_size();

    ret = flash.deinit();

    static FlashIAPBlockDevice default_bd(bottom_address, start_address + flash_size - bottom_address);

#else

    static FlashIAPBlockDevice default_bd;

#endif

    return &default_bd;

#else

    return NULL;

#endif

}

FileSystem *FileSystem::get_default_instance()
{
#if COMPONENT_SPIF || COMPONENT_QSPIF || COMPONENT_DATAFLASH || COMPONENT_NUSD

    static LittleFileSystem flash("flash", BlockDevice::get_default_instance());
    flash.set_as_default();

    return &flash;

#elif COMPONENT_SD

    static FATFileSystem sdcard("sd", BlockDevice::get_default_instance());
    sdcard.set_as_default();

    return &sdcard;

#elif COMPONENT_FLASHIAP

    static LittleFileSystem flash("flash", BlockDevice::get_default_instance());
    flash.set_as_default();

    return &flash;

#else

    return NULL;

#endif

}