AT&T IoT / Mbed OS ATT_AWS_IoT_demo Featured

Demo application for using the AT&T IoT Starter Kit Powered by AWS.

Dependencies:   SDFileSystem

Fork of ATT_AWS_IoT_demo by Anthony Phillips

IoT Starter Kit Powered by AWS Demo

This program demonstrates the AT&T IoT Starter Kit sending data directly into AWS IoT. It's explained and used in the Getting Started with the IoT Starter Kit Powered by AWS on starterkit.att.com.

What's required

  • AT&T IoT LTE Add-on (also known as the Cellular Shield)
  • NXP K64F - for programming
  • microSD card - used to store your AWS security credentials
  • AWS account
  • Python, locally installed

If you don't already have an IoT Starter Kit, you can purchase a kit here. The IoT Starter Kit Powered by AWS includes the LTE cellular shield, K64F, and a microSD card.

Diff: README.md

Revision:
25:91d771247ac8
Parent:
24:224c07ec3bd0
--- a/README.md	Fri Dec 16 18:04:39 2016 +0000
+++ b/README.md	Mon Dec 19 20:52:28 2016 +0000
@@ -102,25 +102,25 @@
    through the "Python AWS IoT Tutorial" to the point where you've installed Python 2.7.11 and the libraries
    required to run the script (paho-mqtt, AWSIoTPythonSDK).
 
-
+2) Copy the mbed project folder "PythonGUI" onto your PC somewhere. "C:/Temp/PythonGUI" for example.
 
-2a) Option a (default) - Use an mqtt_config.txt file:
+3a) Option a (default) - Use an mqtt_config.txt file:
    a) Use the same mqtt_config.txt file from MBED section above.
    b) Place the file where Python looks for it:
    AWS_MQTT_CONFIG_FILENAME     = "C:/Temp/certs/mqtt_config.txt"
 
-2b) Option b - Hard code the MQTT config:
+3b) Option b - Hard code the MQTT config:
    a) In the ATT_AWS_IoT_Demo_GUI.py script search for the "AWS IoT Config Parameters" and update them so they
       match the same 'thing' parameters as the mbed project.
 
    b) In the Python file change the following variable to TRUE:
    hardCodeMQTT = True
 
-3) Place your 'thing' certificates into file locations where the Python looks for them.  For example:
+4) Place your 'thing' certificates into file locations where the Python looks for them.  For example:
    AWS_IOT_ROOT_CA_FILENAME     = "C:/Temp/certs/rootCA-certificate.crt"
    AWS_IOT_PRIVATE_KEY_FILENAME = "C:/Temp/certs/private.pem.key"
    AWS_IOT_CERTIFICATE_FILENAME = "C:/Temp/certs/certificate.pem.crt"
-
+   
 Once all this is setup you should be able to:
 1) See the FRDM board start up and connect to Amazon and then create a 'thing' shadow (if there is none).
 2) See the FRDM board get the shadow LED color.