Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
BNO055 Class Reference
Class for operating Bosch BNO055 sensor over I2C. More...
#include <BNO055.h>
Public Member Functions | |
| BNO055 (PinName SDA, PinName SCL) | |
| Create BNO055 instance. | |
| void | get_yaw () |
| yawを求める | |
| void | reset () |
| Perform a power-on reset of the BNO055. | |
| bool | check () |
| Check that the BNO055 is connected and download the software details and serial number of chip and store in ID structure. | |
| void | SetExternalCrystal (bool yn) |
| Turn the external timing crystal on/off. | |
| void | setmode (char mode) |
| Set the operation mode of the sensor. | |
| void | setpowermode (char mode) |
| Set the power mode of the sensor. | |
| void | set_accel_units (char units) |
| Set the output units from the accelerometer, either MPERSPERS or MILLIG. | |
| void | set_anglerate_units (char units) |
| Set the output units from the gyroscope, either DEG_PER_SEC or RAD_PER_SEC. | |
| void | set_angle_units (char units) |
| Set the output units from the IMU, either DEGREES or RADIANS. | |
| void | set_temp_units (char units) |
| Set the output units from the temperature sensor, either CENTIGRADE or FAHRENHEIT. | |
| void | set_orientation (char units) |
| Set the data output format to either WINDOWS or ANDROID. | |
| void | set_mapping (char orient) |
| Set the mapping of the exes/directions as per page 25 of datasheet range 0-7, any value outside this will set the orientation to P1 (default at power up) | |
| void | get_accel (void) |
| Get the current values from the accelerometer. | |
| void | get_gyro (void) |
| Get the current values from the gyroscope. | |
| void | get_mag (void) |
| Get the current values from the magnetometer. | |
| void | get_lia (void) |
| Get the corrected linear acceleration. | |
| void | get_grv (void) |
| Get the current gravity vector. | |
| void | get_quat (void) |
| Get the output quaternion. | |
| void | get_angles (void) |
| Get the current Euler angles. | |
| void | get_temp (void) |
| Get the current temperature. | |
| void | get_calib (void) |
| Read the calibration status register and store the result in the calib variable. | |
| void | read_calibration_data (void) |
| Read the offset and radius values into the calibration array. | |
| void | write_calibration_data (void) |
| Write the contents of the calibration array into the registers. | |
Data Fields | |
| values | accel |
| Structures containing 3-axis data for acceleration, rate of turn and magnetic field. | |
| angles | euler |
| Stucture containing the Euler angles as yaw, pitch, roll as scaled floating point and rawyaw, rawroll & rollpitch as the int16_t values loaded from the registers. | |
| quaternion | quat |
| Quaternion values as w,x,y,z (scaled floating point) and raww etc... | |
| char | calib |
| Current contents of calibration status register. | |
| char | calibration [22] |
| Contents of the 22 registers containing offset and radius values used as calibration by the sensor. | |
| chip | ID |
| Structure containing sensor numbers, software version and chip UID. | |
| int | temperature |
| Current temperature. | |
Detailed Description
Class for operating Bosch BNO055 sensor over I2C.
Definition at line 177 of file BNO055.h.
Constructor & Destructor Documentation
| BNO055 | ( | PinName | SDA, |
| PinName | SCL | ||
| ) |
Create BNO055 instance.
Definition at line 4 of file BNO055.cpp.
Member Function Documentation
| bool check | ( | ) |
Check that the BNO055 is connected and download the software details and serial number of chip and store in ID structure.
Definition at line 55 of file BNO055.cpp.
| void get_accel | ( | void | ) |
Get the current values from the accelerometer.
Definition at line 155 of file BNO055.cpp.
| void get_angles | ( | void | ) |
Get the current Euler angles.
Definition at line 229 of file BNO055.cpp.
| void get_calib | ( | void | ) |
Read the calibration status register and store the result in the calib variable.
Definition at line 247 of file BNO055.cpp.
| void get_grv | ( | void | ) |
Get the current gravity vector.
Definition at line 203 of file BNO055.cpp.
| void get_gyro | ( | void | ) |
Get the current values from the gyroscope.
Definition at line 167 of file BNO055.cpp.
| void get_lia | ( | void | ) |
Get the corrected linear acceleration.
Definition at line 191 of file BNO055.cpp.
| void get_mag | ( | void | ) |
Get the current values from the magnetometer.
Definition at line 179 of file BNO055.cpp.
| void get_quat | ( | void | ) |
Get the output quaternion.
Definition at line 215 of file BNO055.cpp.
| void get_temp | ( | void | ) |
Get the current temperature.
Definition at line 242 of file BNO055.cpp.
| void get_yaw | ( | ) |
yawを求める
Definition at line 26 of file BNO055.cpp.
| void read_calibration_data | ( | void | ) |
Read the offset and radius values into the calibration array.
Definition at line 252 of file BNO055.cpp.
| void reset | ( | ) |
Perform a power-on reset of the BNO055.
Definition at line 46 of file BNO055.cpp.
| void set_accel_units | ( | char | units ) |
Set the output units from the accelerometer, either MPERSPERS or MILLIG.
Definition at line 86 of file BNO055.cpp.
| void set_angle_units | ( | char | units ) |
Set the output units from the IMU, either DEGREES or RADIANS.
Definition at line 112 of file BNO055.cpp.
| void set_anglerate_units | ( | char | units ) |
Set the output units from the gyroscope, either DEG_PER_SEC or RAD_PER_SEC.
Definition at line 99 of file BNO055.cpp.
| void set_mapping | ( | char | orient ) |
Set the mapping of the exes/directions as per page 25 of datasheet range 0-7, any value outside this will set the orientation to P1 (default at power up)
Definition at line 274 of file BNO055.cpp.
| void set_orientation | ( | char | units ) |
Set the data output format to either WINDOWS or ANDROID.
Definition at line 138 of file BNO055.cpp.
| void set_temp_units | ( | char | units ) |
Set the output units from the temperature sensor, either CENTIGRADE or FAHRENHEIT.
Definition at line 125 of file BNO055.cpp.
| void SetExternalCrystal | ( | bool | yn ) |
Turn the external timing crystal on/off.
Definition at line 78 of file BNO055.cpp.
| void setmode | ( | char | mode ) |
Set the operation mode of the sensor.
Definition at line 145 of file BNO055.cpp.
| void setpowermode | ( | char | mode ) |
Set the power mode of the sensor.
Definition at line 150 of file BNO055.cpp.
| void write_calibration_data | ( | void | ) |
Write the contents of the calibration array into the registers.
Definition at line 263 of file BNO055.cpp.
Field Documentation
| values accel |
| char calib |
| char calibration[22] |
| angles euler |
| chip ID |
| quaternion quat |
| int temperature |
Generated on Fri Jul 15 2022 13:42:16 by
1.7.2