Diff: common/utils.c

Revision:

67:d36977cbfe90

Parent:

65:d91e1d63153d

Child:

69:4305ac772a66

diff -r cc7069bc0ead -r d36977cbfe90 common/utils.c
--- a/common/utils.c	Tue Apr 14 11:43:05 2020 +0000
+++ b/common/utils.c	Mon Apr 20 05:40:18 2020 +0000
@@ -48,7 +48,7 @@
     ADMW_STATUS *pStatus)
 {
     ADMW_LOG_INFO("Status Summary:");
-
+   
     if (pStatus->deviceStatus == 0) {
         ADMW_LOG_INFO("\tNo errors detected");
     } else {
@@ -60,22 +60,19 @@
             ADMW_LOG_INFO("\tActive Errors - RESET REQUIRED");
         if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_FIFO_ERROR)
             ADMW_LOG_INFO("\tActive FIFO Errors - ATTENTION REQUIRED");
+            ADMW_LOG_INFO("\tFIFO buffer full");
+            ADMW_LOG_INFO("\tExceeding measurements per cycle limit of %d",MAXIMUM_MEASUREMENTS_PER_CYCLE);
         if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_CONFIG_ERROR)
             ADMW_LOG_INFO("\tActive Configuration Errors - ATTENTION REQUIRED");
 
         if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ALERT) {
             ADMW_LOG_INFO("\tActive Alerts - ATTENTION REQUIRED:");
-            ADMW_LOG_INFO("\t\tLast Alert Code: %u (0x%X)",
-                          pStatus->alertCode, pStatus->alertCode);
 
             for (unsigned i = 0; i < ADMW1001_MAX_CHANNELS; i++) {
                 if (pStatus->channelAlerts[i] == 0)
                     continue;
 
                 ADMW_LOG_INFO("\t\tChannel #%u:", i);
-                ADMW_LOG_INFO("\t\t\tLast Alert Code: %u (0x%X)",
-                              pStatus->channelAlertCodes[i],
-                              pStatus->channelAlertCodes[i]);
                 if (pStatus->channelAlerts[i] & ADMW_ALERT_DETAIL_CH_ADC_NEAR_OVERRANGE)
                     ADMW_LOG_INFO("\t\t\ADC near overrange detected");
                 if (pStatus->channelAlerts[i] & ADMW_ALERT_DETAIL_CH_SENSOR_UNDERRANGE)
@@ -92,13 +89,6 @@
                     ADMW_LOG_INFO("\t\t\tChannel sensor hardfault alert detected");
             }
         }
-
-        if ((pStatus->deviceStatus & ADMW_DEVICE_STATUS_ERROR) ||
-                (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ALERT)) {
-            ADMW_LOG_INFO("\t\tLast Debug Code: %u-%u",
-                          (pStatus->debugCode >> 16) & 0xFFFF,
-                          (pStatus->debugCode >> 0) & 0xFFFF);
-        }
     }
 }
 
@@ -264,12 +254,19 @@
     uint32_t nSampleCount = 0;
     uint32_t nReturned;
     while (true) {
-        ADMW_STATUS status;
+    ADMW_STATUS status;
 
         /*
          * Wait until the next batch of 1 or more samples is ready, continuously
          * checking DATAREADY until it is asserted
          */
+    //Checking the status of the device before capturing the data 
+    res = admw_GetStatus(hDevice, &status);
+    if (res != ADMW_SUCCESS) 
+    {
+        ADMW_LOG_ERROR("Failed to retrieve device status");
+    }
+    utils_printStatus(&status);
         while (! (bDataReady || bError));
 
             if (!bError) {