ADMW1001_Beta_Release
/
EV-PRO-MW1001_initialCommit
initial commit
common/utils.c@15:b5d57daeb7c0, 2019-07-26 (annotated)
- Committer:
- Vkadaba
- Date:
- Fri Jul 26 08:42:53 2019 +0000
- Revision:
- 15:b5d57daeb7c0
- Parent:
- 10:14954555be2a
- Child:
- 23:bb685f35b08b
Modified the copyright notice
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Vkadaba | 15:b5d57daeb7c0 | 1 | /* |
Vkadaba | 15:b5d57daeb7c0 | 2 | Copyright 2019 (c) Analog Devices, Inc. |
Vkadaba | 15:b5d57daeb7c0 | 3 | |
Vkadaba | 15:b5d57daeb7c0 | 4 | All rights reserved. |
Vkadaba | 15:b5d57daeb7c0 | 5 | |
Vkadaba | 15:b5d57daeb7c0 | 6 | Redistribution and use in source and binary forms, with or without |
Vkadaba | 15:b5d57daeb7c0 | 7 | modification, are permitted provided that the following conditions are met: |
Vkadaba | 15:b5d57daeb7c0 | 8 | - Redistributions of source code must retain the above copyright |
Vkadaba | 15:b5d57daeb7c0 | 9 | notice, this list of conditions and the following disclaimer. |
Vkadaba | 15:b5d57daeb7c0 | 10 | - Redistributions in binary form must reproduce the above copyright |
Vkadaba | 15:b5d57daeb7c0 | 11 | notice, this list of conditions and the following disclaimer in |
Vkadaba | 15:b5d57daeb7c0 | 12 | the documentation and/or other materials provided with the |
Vkadaba | 15:b5d57daeb7c0 | 13 | distribution. |
Vkadaba | 15:b5d57daeb7c0 | 14 | - Neither the name of Analog Devices, Inc. nor the names of its |
Vkadaba | 15:b5d57daeb7c0 | 15 | contributors may be used to endorse or promote products derived |
Vkadaba | 15:b5d57daeb7c0 | 16 | from this software without specific prior written permission. |
Vkadaba | 15:b5d57daeb7c0 | 17 | - The use of this software may or may not infringe the patent rights |
Vkadaba | 15:b5d57daeb7c0 | 18 | of one or more patent holders. This license does not release you |
Vkadaba | 15:b5d57daeb7c0 | 19 | from the requirement that you obtain separate licenses from these |
Vkadaba | 15:b5d57daeb7c0 | 20 | patent holders to use this software. |
Vkadaba | 15:b5d57daeb7c0 | 21 | - Use of the software either in source or binary form, must be run |
Vkadaba | 15:b5d57daeb7c0 | 22 | on or directly connected to an Analog Devices Inc. component. |
Vkadaba | 15:b5d57daeb7c0 | 23 | |
Vkadaba | 15:b5d57daeb7c0 | 24 | THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR |
Vkadaba | 15:b5d57daeb7c0 | 25 | IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, |
Vkadaba | 15:b5d57daeb7c0 | 26 | MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
Vkadaba | 15:b5d57daeb7c0 | 27 | IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, |
Vkadaba | 15:b5d57daeb7c0 | 28 | INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
Vkadaba | 15:b5d57daeb7c0 | 29 | LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR |
Vkadaba | 15:b5d57daeb7c0 | 30 | SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
Vkadaba | 15:b5d57daeb7c0 | 31 | CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
Vkadaba | 15:b5d57daeb7c0 | 32 | OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
Vkadaba | 15:b5d57daeb7c0 | 33 | OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
Vkadaba | 15:b5d57daeb7c0 | 34 | */ |
Vkadaba | 15:b5d57daeb7c0 | 35 | |
Vkadaba | 15:b5d57daeb7c0 | 36 | /*! |
Vkadaba | 15:b5d57daeb7c0 | 37 | ****************************************************************************** |
Vkadaba | 15:b5d57daeb7c0 | 38 | * @file: utils.c |
Vkadaba | 15:b5d57daeb7c0 | 39 | * @brief: Interface Utilities for ADMW1001 |
Vkadaba | 15:b5d57daeb7c0 | 40 | *----------------------------------------------------------------------------- |
Vkadaba | 15:b5d57daeb7c0 | 41 | */ |
ADIJake | 0:85855ecd3257 | 42 | #include <stdlib.h> |
ADIJake | 0:85855ecd3257 | 43 | |
ADIJake | 0:85855ecd3257 | 44 | #include "utils.h" |
Vkadaba | 5:0728bde67bdb | 45 | #include "admw_log.h" |
ADIJake | 0:85855ecd3257 | 46 | |
ADIJake | 0:85855ecd3257 | 47 | void utils_printStatus( |
Vkadaba | 5:0728bde67bdb | 48 | ADMW_STATUS *pStatus) |
ADIJake | 0:85855ecd3257 | 49 | { |
Vkadaba | 5:0728bde67bdb | 50 | ADMW_LOG_INFO("Status Summary:"); |
ADIJake | 0:85855ecd3257 | 51 | |
ADIJake | 0:85855ecd3257 | 52 | if (pStatus->deviceStatus == 0) |
ADIJake | 0:85855ecd3257 | 53 | { |
Vkadaba | 5:0728bde67bdb | 54 | ADMW_LOG_INFO("\tNo errors detected"); |
ADIJake | 0:85855ecd3257 | 55 | } |
ADIJake | 0:85855ecd3257 | 56 | else |
ADIJake | 0:85855ecd3257 | 57 | { |
Vkadaba | 5:0728bde67bdb | 58 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_BUSY) |
Vkadaba | 5:0728bde67bdb | 59 | ADMW_LOG_INFO("\tCommand running"); |
Vkadaba | 5:0728bde67bdb | 60 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_DATAREADY) |
Vkadaba | 5:0728bde67bdb | 61 | ADMW_LOG_INFO("\tData ready"); |
Vkadaba | 5:0728bde67bdb | 62 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ERROR) |
Vkadaba | 5:0728bde67bdb | 63 | ADMW_LOG_INFO("\tActive Errors - RESET REQUIRED"); |
Vkadaba | 5:0728bde67bdb | 64 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_FIFO_ERROR) |
Vkadaba | 5:0728bde67bdb | 65 | ADMW_LOG_INFO("\tActive FIFO Errors - ATTENTION REQUIRED"); |
Vkadaba | 5:0728bde67bdb | 66 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_CONFIG_ERROR) |
Vkadaba | 5:0728bde67bdb | 67 | ADMW_LOG_INFO("\tActive Configuration Errors - ATTENTION REQUIRED"); |
Vkadaba | 5:0728bde67bdb | 68 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_LUT_ERROR) |
Vkadaba | 5:0728bde67bdb | 69 | ADMW_LOG_INFO("\tActive Look-Up Table Errors - ATTENTION REQUIRED"); |
Vkadaba | 6:9d393a9677f4 | 70 | |
ADIJake | 0:85855ecd3257 | 71 | |
Vkadaba | 5:0728bde67bdb | 72 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ERROR) |
ADIJake | 0:85855ecd3257 | 73 | { |
Vkadaba | 5:0728bde67bdb | 74 | ADMW_LOG_INFO("\tActive Errors - ATTENTION REQUIRED"); |
Vkadaba | 5:0728bde67bdb | 75 | ADMW_LOG_INFO("\t\tLast Error Code: %u (0x%X)", |
ADIJake | 0:85855ecd3257 | 76 | pStatus->errorCode, pStatus->errorCode); |
ADIJake | 0:85855ecd3257 | 77 | |
ADIJake | 0:85855ecd3257 | 78 | if (pStatus->diagnosticsStatus == 0) |
ADIJake | 0:85855ecd3257 | 79 | { |
Vkadaba | 5:0728bde67bdb | 80 | ADMW_LOG_INFO("\t\tNo diagnostics faults detected"); |
ADIJake | 0:85855ecd3257 | 81 | } |
ADIJake | 0:85855ecd3257 | 82 | else |
ADIJake | 0:85855ecd3257 | 83 | { |
Vkadaba | 5:0728bde67bdb | 84 | ADMW_LOG_INFO("\t\tActive diagnostics faults:"); |
ADIJake | 0:85855ecd3257 | 85 | |
Vkadaba | 5:0728bde67bdb | 86 | if (pStatus->diagnosticsStatus & ADMW_DIAGNOSTICS_STATUS_CHECKSUM_ERROR) |
Vkadaba | 5:0728bde67bdb | 87 | ADMW_LOG_INFO("\t\t\tInternal Checksum fault detected"); |
Vkadaba | 6:9d393a9677f4 | 88 | |
Vkadaba | 6:9d393a9677f4 | 89 | |
Vkadaba | 6:9d393a9677f4 | 90 | |
Vkadaba | 5:0728bde67bdb | 91 | if (pStatus->diagnosticsStatus & ADMW_DIAGNOSTICS_STATUS_CONVERSION_ERROR) |
Vkadaba | 5:0728bde67bdb | 92 | ADMW_LOG_INFO("\t\t\tInternal ADC Conversions fault detected"); |
Vkadaba | 5:0728bde67bdb | 93 | if (pStatus->diagnosticsStatus & ADMW_DIAGNOSTICS_STATUS_CALIBRATION_ERROR) |
Vkadaba | 5:0728bde67bdb | 94 | ADMW_LOG_INFO("\t\t\tInternal Device Calibrations fault detected"); |
ADIJake | 0:85855ecd3257 | 95 | } |
ADIJake | 0:85855ecd3257 | 96 | } |
ADIJake | 0:85855ecd3257 | 97 | |
Vkadaba | 5:0728bde67bdb | 98 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ALERT) |
ADIJake | 0:85855ecd3257 | 99 | { |
Vkadaba | 5:0728bde67bdb | 100 | ADMW_LOG_INFO("\tActive Alerts - ATTENTION REQUIRED:"); |
Vkadaba | 5:0728bde67bdb | 101 | ADMW_LOG_INFO("\t\tLast Alert Code: %u (0x%X)", |
ADIJake | 0:85855ecd3257 | 102 | pStatus->alertCode, pStatus->alertCode); |
ADIJake | 0:85855ecd3257 | 103 | |
Vkadaba | 5:0728bde67bdb | 104 | for (unsigned i = 0; i < ADMW1001_MAX_CHANNELS; i++) |
ADIJake | 0:85855ecd3257 | 105 | { |
ADIJake | 0:85855ecd3257 | 106 | if (pStatus->channelAlerts[i] == 0) |
ADIJake | 0:85855ecd3257 | 107 | continue; |
ADIJake | 0:85855ecd3257 | 108 | |
Vkadaba | 5:0728bde67bdb | 109 | ADMW_LOG_INFO("\t\tChannel #%u:", i); |
Vkadaba | 5:0728bde67bdb | 110 | ADMW_LOG_INFO("\t\t\tLast Alert Code: %u (0x%X)", |
ADIJake | 0:85855ecd3257 | 111 | pStatus->channelAlertCodes[i], |
ADIJake | 0:85855ecd3257 | 112 | pStatus->channelAlertCodes[i]); |
Vkadaba | 5:0728bde67bdb | 113 | if (pStatus->channelAlerts[i] & ADMW_CHANNEL_ALERT_TIMEOUT) |
Vkadaba | 5:0728bde67bdb | 114 | ADMW_LOG_INFO("\t\t\tTimeout alert detected"); |
Vkadaba | 5:0728bde67bdb | 115 | if (pStatus->channelAlerts[i] & ADMW_CHANNEL_ALERT_UNDER_RANGE) |
Vkadaba | 5:0728bde67bdb | 116 | ADMW_LOG_INFO("\t\t\tUnder Range alert detected"); |
Vkadaba | 5:0728bde67bdb | 117 | if (pStatus->channelAlerts[i] & ADMW_CHANNEL_ALERT_OVER_RANGE) |
Vkadaba | 5:0728bde67bdb | 118 | ADMW_LOG_INFO("\t\t\tOver Range alert detected"); |
Vkadaba | 5:0728bde67bdb | 119 | if (pStatus->channelAlerts[i] & ADMW_CHANNEL_ALERT_LOW_LIMIT) |
Vkadaba | 5:0728bde67bdb | 120 | ADMW_LOG_INFO("\t\t\tLow limit alert detected"); |
Vkadaba | 5:0728bde67bdb | 121 | if (pStatus->channelAlerts[i] & ADMW_CHANNEL_ALERT_HIGH_LIMIT) |
Vkadaba | 5:0728bde67bdb | 122 | ADMW_LOG_INFO("\t\t\tHigh Limit alert detected"); |
Vkadaba | 5:0728bde67bdb | 123 | if (pStatus->channelAlerts[i] & ADMW_CHANNEL_ALERT_SENSOR_OPEN) |
Vkadaba | 5:0728bde67bdb | 124 | ADMW_LOG_INFO("\t\t\tSensor Fault alert detected"); |
Vkadaba | 5:0728bde67bdb | 125 | if (pStatus->channelAlerts[i] & ADMW_CHANNEL_ALERT_REF_DETECT) |
Vkadaba | 5:0728bde67bdb | 126 | ADMW_LOG_INFO("\t\t\tReference Detection alert detected"); |
Vkadaba | 5:0728bde67bdb | 127 | if (pStatus->channelAlerts[i] & ADMW_CHANNEL_ALERT_CONFIG_ERR) |
Vkadaba | 5:0728bde67bdb | 128 | ADMW_LOG_INFO("\t\t\tConfiguration Error alert detected"); |
Vkadaba | 5:0728bde67bdb | 129 | if (pStatus->channelAlerts[i] & ADMW_CHANNEL_ALERT_LUT_ERR) |
Vkadaba | 5:0728bde67bdb | 130 | ADMW_LOG_INFO("\t\t\tLook-Up Table Error alert detected"); |
Vkadaba | 5:0728bde67bdb | 131 | if (pStatus->channelAlerts[i] & ADMW_CHANNEL_ALERT_SENSOR_NOT_READY) |
Vkadaba | 5:0728bde67bdb | 132 | ADMW_LOG_INFO("\t\t\tSensor Not Ready alert detected"); |
Vkadaba | 5:0728bde67bdb | 133 | if (pStatus->channelAlerts[i] & ADMW_CHANNEL_ALERT_COMP_NOT_READY) |
Vkadaba | 5:0728bde67bdb | 134 | ADMW_LOG_INFO("\t\t\tCompensation Channel Not Ready alert detected"); |
Vkadaba | 5:0728bde67bdb | 135 | if (pStatus->channelAlerts[i] & ADMW_CHANNEL_ALERT_LUT_UNDER_RANGE) |
Vkadaba | 5:0728bde67bdb | 136 | ADMW_LOG_INFO("\t\t\tUnder Look-Up Table Range alert detected"); |
Vkadaba | 5:0728bde67bdb | 137 | if (pStatus->channelAlerts[i] & ADMW_CHANNEL_ALERT_LUT_OVER_RANGE) |
Vkadaba | 5:0728bde67bdb | 138 | ADMW_LOG_INFO("\t\t\tOver Look-Up Table Range alert detected"); |
ADIJake | 0:85855ecd3257 | 139 | } |
ADIJake | 0:85855ecd3257 | 140 | } |
ADIJake | 0:85855ecd3257 | 141 | |
Vkadaba | 5:0728bde67bdb | 142 | if ((pStatus->deviceStatus & ADMW_DEVICE_STATUS_ERROR) || |
Vkadaba | 5:0728bde67bdb | 143 | (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ALERT)) |
ADIJake | 0:85855ecd3257 | 144 | { |
Vkadaba | 5:0728bde67bdb | 145 | ADMW_LOG_INFO("\t\tLast Debug Code: %u-%u", |
ADIJake | 0:85855ecd3257 | 146 | (pStatus->debugCode >> 16) & 0xFFFF, |
ADIJake | 0:85855ecd3257 | 147 | (pStatus->debugCode >> 0) & 0xFFFF); |
ADIJake | 0:85855ecd3257 | 148 | } |
ADIJake | 0:85855ecd3257 | 149 | } |
ADIJake | 0:85855ecd3257 | 150 | } |
ADIJake | 0:85855ecd3257 | 151 | |
ADIJake | 0:85855ecd3257 | 152 | void utils_printSamples( |
Vkadaba | 5:0728bde67bdb | 153 | ADMW_DATA_SAMPLE *pSampleBuffer, |
ADIJake | 0:85855ecd3257 | 154 | uint32_t nNumSamples, |
Vkadaba | 5:0728bde67bdb | 155 | ADMW_MEASUREMENT_MODE eMeasurementMode) |
ADIJake | 0:85855ecd3257 | 156 | { |
Vkadaba | 10:14954555be2a | 157 | |
Vkadaba | 10:14954555be2a | 158 | for (uint32_t i = 0; i < nNumSamples; i++) |
Vkadaba | 10:14954555be2a | 159 | { |
Vkadaba | 10:14954555be2a | 160 | ADMW_LOG_INFO("Sample # %2d Channel # %2d :: Raw %0X %f :: Processed %f :: flags:%s%s", |
Vkadaba | 10:14954555be2a | 161 | i+1, |
Vkadaba | 10:14954555be2a | 162 | pSampleBuffer[i].channelId, |
Vkadaba | 10:14954555be2a | 163 | pSampleBuffer[i].rawValue, (pSampleBuffer[i].rawValue/1024.0), |
Vkadaba | 10:14954555be2a | 164 | pSampleBuffer[i].processedValue, |
Vkadaba | 10:14954555be2a | 165 | pSampleBuffer[i].status & ADMW_DEVICE_STATUS_ERROR ? " ERROR" : "", |
Vkadaba | 10:14954555be2a | 166 | pSampleBuffer[i].status & ADMW_DEVICE_STATUS_ALERT ? " ALERT" : ""); |
Vkadaba | 10:14954555be2a | 167 | } |
ADIJake | 0:85855ecd3257 | 168 | } |
ADIJake | 0:85855ecd3257 | 169 | |
Vkadaba | 5:0728bde67bdb | 170 | static void gpioCallbackFn(ADMW_GPIO_PIN ePinId, void * pArg) |
ADIJake | 0:85855ecd3257 | 171 | { |
ADIJake | 0:85855ecd3257 | 172 | volatile bool *pbFlag = (volatile bool *)pArg; |
ADIJake | 0:85855ecd3257 | 173 | *pbFlag = true; |
ADIJake | 0:85855ecd3257 | 174 | } |
ADIJake | 0:85855ecd3257 | 175 | |
Vkadaba | 5:0728bde67bdb | 176 | ADMW_RESULT utils_registerCallbacks( |
Vkadaba | 5:0728bde67bdb | 177 | ADMW_DEVICE_HANDLE hDevice, |
ADIJake | 0:85855ecd3257 | 178 | volatile bool *pbDataReady, |
ADIJake | 0:85855ecd3257 | 179 | volatile bool *pbError, |
ADIJake | 0:85855ecd3257 | 180 | volatile bool *pbAlert) |
ADIJake | 0:85855ecd3257 | 181 | { |
Vkadaba | 5:0728bde67bdb | 182 | ADMW_RESULT res; |
ADIJake | 0:85855ecd3257 | 183 | bool state; |
ADIJake | 0:85855ecd3257 | 184 | |
Vkadaba | 5:0728bde67bdb | 185 | res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_DATAREADY, |
ADIJake | 0:85855ecd3257 | 186 | gpioCallbackFn, (void *)pbDataReady); |
Vkadaba | 5:0728bde67bdb | 187 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 188 | { |
Vkadaba | 5:0728bde67bdb | 189 | ADMW_LOG_ERROR("Failed to register DATAREADY callback"); |
ADIJake | 0:85855ecd3257 | 190 | return res; |
ADIJake | 0:85855ecd3257 | 191 | } |
ADIJake | 0:85855ecd3257 | 192 | |
Vkadaba | 5:0728bde67bdb | 193 | res = admw_GetGpioState(hDevice, ADMW_GPIO_PIN_ALERT_ERROR, &state); |
Vkadaba | 5:0728bde67bdb | 194 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 195 | { |
Vkadaba | 5:0728bde67bdb | 196 | ADMW_LOG_ERROR("Failed to get current ERROR state"); |
ADIJake | 0:85855ecd3257 | 197 | return res; |
ADIJake | 0:85855ecd3257 | 198 | } |
ADIJake | 0:85855ecd3257 | 199 | if (state) |
ADIJake | 0:85855ecd3257 | 200 | { |
Vkadaba | 5:0728bde67bdb | 201 | ADMW_LOG_ERROR("ERROR signal already asserted"); |
Vkadaba | 5:0728bde67bdb | 202 | return ADMW_FAILURE; |
ADIJake | 0:85855ecd3257 | 203 | } |
Vkadaba | 5:0728bde67bdb | 204 | res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_ALERT_ERROR, |
ADIJake | 0:85855ecd3257 | 205 | gpioCallbackFn, (void *)pbError); |
Vkadaba | 5:0728bde67bdb | 206 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 207 | { |
Vkadaba | 5:0728bde67bdb | 208 | ADMW_LOG_ERROR("Failed to register ERROR callback"); |
ADIJake | 0:85855ecd3257 | 209 | return res; |
ADIJake | 0:85855ecd3257 | 210 | } |
ADIJake | 0:85855ecd3257 | 211 | |
Vkadaba | 5:0728bde67bdb | 212 | /*res = admw_GetGpioState(hDevice, ADMW_GPIO_PIN_ALERT, &state); |
Vkadaba | 5:0728bde67bdb | 213 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 214 | { |
Vkadaba | 5:0728bde67bdb | 215 | ADMW_LOG_ERROR("Failed to get current ALERT state"); |
ADIJake | 0:85855ecd3257 | 216 | return res; |
ADIJake | 0:85855ecd3257 | 217 | } |
ADIJake | 0:85855ecd3257 | 218 | if (state) |
ADIJake | 0:85855ecd3257 | 219 | { |
Vkadaba | 5:0728bde67bdb | 220 | ADMW_LOG_ERROR("ALERT signal already asserted"); |
Vkadaba | 5:0728bde67bdb | 221 | return ADMW_FAILURE; |
ADIJake | 1:63dd03580de4 | 222 | }*/ |
Vkadaba | 5:0728bde67bdb | 223 | res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_ALERT_ERROR, |
ADIJake | 0:85855ecd3257 | 224 | gpioCallbackFn, (void *)pbAlert); |
Vkadaba | 5:0728bde67bdb | 225 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 226 | { |
Vkadaba | 5:0728bde67bdb | 227 | ADMW_LOG_ERROR("Failed to register ALERT callback"); |
ADIJake | 0:85855ecd3257 | 228 | return res; |
ADIJake | 0:85855ecd3257 | 229 | } |
ADIJake | 0:85855ecd3257 | 230 | |
Vkadaba | 5:0728bde67bdb | 231 | return ADMW_SUCCESS; |
ADIJake | 0:85855ecd3257 | 232 | } |
ADIJake | 0:85855ecd3257 | 233 | |
Vkadaba | 5:0728bde67bdb | 234 | ADMW_RESULT utils_deregisterCallbacks( |
Vkadaba | 5:0728bde67bdb | 235 | ADMW_DEVICE_HANDLE hDevice) |
ADIJake | 0:85855ecd3257 | 236 | { |
Vkadaba | 5:0728bde67bdb | 237 | ADMW_RESULT res; |
ADIJake | 0:85855ecd3257 | 238 | |
Vkadaba | 5:0728bde67bdb | 239 | res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_DATAREADY, |
ADIJake | 0:85855ecd3257 | 240 | NULL, NULL); |
Vkadaba | 5:0728bde67bdb | 241 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 242 | { |
Vkadaba | 5:0728bde67bdb | 243 | ADMW_LOG_ERROR("Failed to deregister DATAREADY callback"); |
ADIJake | 0:85855ecd3257 | 244 | return res; |
ADIJake | 0:85855ecd3257 | 245 | } |
ADIJake | 0:85855ecd3257 | 246 | |
Vkadaba | 5:0728bde67bdb | 247 | res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_ALERT_ERROR, |
ADIJake | 0:85855ecd3257 | 248 | NULL, NULL); |
Vkadaba | 5:0728bde67bdb | 249 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 250 | { |
Vkadaba | 5:0728bde67bdb | 251 | ADMW_LOG_ERROR("Failed to deregister ERROR callback"); |
ADIJake | 0:85855ecd3257 | 252 | return res; |
ADIJake | 0:85855ecd3257 | 253 | } |
ADIJake | 0:85855ecd3257 | 254 | |
Vkadaba | 5:0728bde67bdb | 255 | res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_ALERT_ERROR, |
ADIJake | 0:85855ecd3257 | 256 | NULL, NULL); |
Vkadaba | 5:0728bde67bdb | 257 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 258 | { |
Vkadaba | 5:0728bde67bdb | 259 | ADMW_LOG_INFO("Failed to deregister ALERT callback"); |
ADIJake | 0:85855ecd3257 | 260 | return res; |
ADIJake | 0:85855ecd3257 | 261 | } |
ADIJake | 0:85855ecd3257 | 262 | |
Vkadaba | 5:0728bde67bdb | 263 | return ADMW_SUCCESS; |
ADIJake | 0:85855ecd3257 | 264 | } |
ADIJake | 0:85855ecd3257 | 265 | |
Vkadaba | 5:0728bde67bdb | 266 | ADMW_RESULT utils_runMeasurement( |
Vkadaba | 5:0728bde67bdb | 267 | ADMW_DEVICE_HANDLE hDevice, |
Vkadaba | 5:0728bde67bdb | 268 | ADMW_MEASUREMENT_MODE eMeasurementMode) |
ADIJake | 0:85855ecd3257 | 269 | { |
Vkadaba | 5:0728bde67bdb | 270 | ADMW_RESULT res; |
ADIJake | 0:85855ecd3257 | 271 | |
ADIJake | 0:85855ecd3257 | 272 | volatile bool bDataReady = false; |
ADIJake | 0:85855ecd3257 | 273 | volatile bool bError = false; |
ADIJake | 0:85855ecd3257 | 274 | volatile bool bAlert = false; |
ADIJake | 0:85855ecd3257 | 275 | res = utils_registerCallbacks(hDevice, &bDataReady, &bError, &bAlert); |
Vkadaba | 5:0728bde67bdb | 276 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 277 | return res; |
ADIJake | 0:85855ecd3257 | 278 | |
ADIJake | 0:85855ecd3257 | 279 | /* |
ADIJake | 0:85855ecd3257 | 280 | * Retrieve the number of samples per cycle, per DATAREADY pulse, etc. for |
ADIJake | 0:85855ecd3257 | 281 | * this configuration. |
ADIJake | 0:85855ecd3257 | 282 | */ |
Vkadaba | 5:0728bde67bdb | 283 | ADMW1001_OPERATING_MODE eOperatingMode; |
Vkadaba | 5:0728bde67bdb | 284 | ADMW1001_DATAREADY_MODE eDataReadyMode; |
ADIJake | 0:85855ecd3257 | 285 | uint32_t nSamplesPerDataready; |
ADIJake | 0:85855ecd3257 | 286 | uint32_t nSamplesPerCycle; |
ADIJake | 0:85855ecd3257 | 287 | uint8_t nBytesPerSample; |
Vkadaba | 5:0728bde67bdb | 288 | res = admw1001_GetDataReadyModeInfo(hDevice, |
ADIJake | 0:85855ecd3257 | 289 | eMeasurementMode, |
ADIJake | 0:85855ecd3257 | 290 | &eOperatingMode, |
ADIJake | 0:85855ecd3257 | 291 | &eDataReadyMode, |
ADIJake | 0:85855ecd3257 | 292 | &nSamplesPerDataready, |
ADIJake | 0:85855ecd3257 | 293 | &nSamplesPerCycle, |
ADIJake | 0:85855ecd3257 | 294 | &nBytesPerSample); |
Vkadaba | 5:0728bde67bdb | 295 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 296 | return res; |
ADIJake | 0:85855ecd3257 | 297 | |
ADIJake | 0:85855ecd3257 | 298 | /* |
ADIJake | 0:85855ecd3257 | 299 | * Allocate a buffer to store the samples retrieved on each DATAREADY pulse |
ADIJake | 0:85855ecd3257 | 300 | */ |
Vkadaba | 5:0728bde67bdb | 301 | ADMW_DATA_SAMPLE *pSampleBuffer; |
Vkadaba | 5:0728bde67bdb | 302 | pSampleBuffer = malloc(sizeof(ADMW_DATA_SAMPLE) * |
ADIJake | 0:85855ecd3257 | 303 | nSamplesPerDataready); |
ADIJake | 0:85855ecd3257 | 304 | if (pSampleBuffer == NULL) |
ADIJake | 0:85855ecd3257 | 305 | { |
Vkadaba | 5:0728bde67bdb | 306 | ADMW_LOG_ERROR("Failed to allocate sample buffer"); |
Vkadaba | 5:0728bde67bdb | 307 | return ADMW_NO_MEM; |
ADIJake | 0:85855ecd3257 | 308 | } |
ADIJake | 0:85855ecd3257 | 309 | |
ADIJake | 0:85855ecd3257 | 310 | /* |
ADIJake | 0:85855ecd3257 | 311 | * Kick off the measurement cycle(s) here |
ADIJake | 0:85855ecd3257 | 312 | */ |
Vkadaba | 5:0728bde67bdb | 313 | ADMW_LOG_INFO("Starting measurement"); |
Vkadaba | 5:0728bde67bdb | 314 | res = admw_StartMeasurement(hDevice, eMeasurementMode); |
Vkadaba | 5:0728bde67bdb | 315 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 316 | { |
Vkadaba | 5:0728bde67bdb | 317 | ADMW_LOG_ERROR("Failed to start measurement"); |
ADIJake | 0:85855ecd3257 | 318 | return res; |
ADIJake | 0:85855ecd3257 | 319 | } |
ADIJake | 0:85855ecd3257 | 320 | |
ADIJake | 0:85855ecd3257 | 321 | /* |
ADIJake | 0:85855ecd3257 | 322 | * Loop continuously unless operating mode is single-cycle |
ADIJake | 0:85855ecd3257 | 323 | */ |
ADIJake | 0:85855ecd3257 | 324 | uint32_t nSampleCount = 0; |
ADIJake | 0:85855ecd3257 | 325 | uint32_t nReturned; |
ADIJake | 0:85855ecd3257 | 326 | while (true) |
ADIJake | 0:85855ecd3257 | 327 | { |
Vkadaba | 5:0728bde67bdb | 328 | ADMW_STATUS status; |
ADIJake | 0:85855ecd3257 | 329 | |
ADIJake | 0:85855ecd3257 | 330 | /* |
ADIJake | 0:85855ecd3257 | 331 | * Wait until the next batch of 1 or more samples is ready, continuously |
ADIJake | 0:85855ecd3257 | 332 | * checking DATAREADY until it is asserted |
ADIJake | 0:85855ecd3257 | 333 | */ |
ADIJake | 0:85855ecd3257 | 334 | while (! (bDataReady || bError)) |
ADIJake | 0:85855ecd3257 | 335 | ; |
ADIJake | 0:85855ecd3257 | 336 | |
ADIJake | 0:85855ecd3257 | 337 | if (!bError) |
ADIJake | 0:85855ecd3257 | 338 | { |
ADIJake | 0:85855ecd3257 | 339 | /* |
ADIJake | 0:85855ecd3257 | 340 | * Get data samples from the measurement cycle, if no error has occurred |
ADIJake | 0:85855ecd3257 | 341 | */ |
ADIJake | 0:85855ecd3257 | 342 | bDataReady = false; |
Vkadaba | 5:0728bde67bdb | 343 | res = admw_GetData(hDevice, eMeasurementMode, pSampleBuffer, |
ADIJake | 0:85855ecd3257 | 344 | nBytesPerSample, nSamplesPerDataready, |
ADIJake | 0:85855ecd3257 | 345 | &nReturned); |
Vkadaba | 5:0728bde67bdb | 346 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 347 | { |
Vkadaba | 5:0728bde67bdb | 348 | if (res == ADMW_INCOMPLETE) |
ADIJake | 0:85855ecd3257 | 349 | { |
ADIJake | 0:85855ecd3257 | 350 | /* |
ADIJake | 0:85855ecd3257 | 351 | * This is expected in cases where cycleSkipCount may |
ADIJake | 0:85855ecd3257 | 352 | * be non-zero for some channels, resulting in |
ADIJake | 0:85855ecd3257 | 353 | * variable-length sequences |
ADIJake | 0:85855ecd3257 | 354 | */ |
Vkadaba | 5:0728bde67bdb | 355 | ADMW_LOG_DEBUG("Retrieved %u of %u requested data samples", |
ADIJake | 0:85855ecd3257 | 356 | nReturned, nSamplesPerDataready); |
ADIJake | 0:85855ecd3257 | 357 | } |
ADIJake | 0:85855ecd3257 | 358 | else |
ADIJake | 0:85855ecd3257 | 359 | { |
Vkadaba | 5:0728bde67bdb | 360 | ADMW_LOG_WARN("Failed to get data samples from device"); |
ADIJake | 0:85855ecd3257 | 361 | return res; |
ADIJake | 0:85855ecd3257 | 362 | } |
ADIJake | 0:85855ecd3257 | 363 | } |
ADIJake | 0:85855ecd3257 | 364 | |
ADIJake | 0:85855ecd3257 | 365 | /* |
ADIJake | 0:85855ecd3257 | 366 | * Display the data samples. |
ADIJake | 0:85855ecd3257 | 367 | * |
ADIJake | 0:85855ecd3257 | 368 | * NOTE: this requires a sufficient idle time between subsequent |
ADIJake | 0:85855ecd3257 | 369 | * DATAREADY pulses to allow printing to occur. Otherwise, |
ADIJake | 0:85855ecd3257 | 370 | * subsequent samples may be missed if not retrieved promptly when |
ADIJake | 0:85855ecd3257 | 371 | * the next DATAREADY assertion occurs. |
ADIJake | 0:85855ecd3257 | 372 | */ |
ADIJake | 0:85855ecd3257 | 373 | utils_printSamples(pSampleBuffer, nReturned, eMeasurementMode); |
ADIJake | 0:85855ecd3257 | 374 | nSampleCount += nReturned; |
ADIJake | 0:85855ecd3257 | 375 | } |
ADIJake | 0:85855ecd3257 | 376 | |
ADIJake | 0:85855ecd3257 | 377 | /* |
ADIJake | 0:85855ecd3257 | 378 | * Check and print device status if errors/alerts have been triggered |
ADIJake | 0:85855ecd3257 | 379 | */ |
ADIJake | 0:85855ecd3257 | 380 | if (bError || bAlert) |
ADIJake | 0:85855ecd3257 | 381 | { |
Vkadaba | 5:0728bde67bdb | 382 | res = admw_GetStatus(hDevice, &status); |
Vkadaba | 5:0728bde67bdb | 383 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 384 | { |
Vkadaba | 5:0728bde67bdb | 385 | ADMW_LOG_ERROR("Failed to retrieve device status"); |
ADIJake | 0:85855ecd3257 | 386 | return res; |
ADIJake | 0:85855ecd3257 | 387 | } |
ADIJake | 0:85855ecd3257 | 388 | |
ADIJake | 0:85855ecd3257 | 389 | if (status.deviceStatus & |
Vkadaba | 5:0728bde67bdb | 390 | (ADMW_DEVICE_STATUS_ERROR | ADMW_DEVICE_STATUS_ALERT)) |
ADIJake | 0:85855ecd3257 | 391 | { |
ADIJake | 0:85855ecd3257 | 392 | utils_printStatus(&status); |
ADIJake | 0:85855ecd3257 | 393 | |
ADIJake | 0:85855ecd3257 | 394 | /* Break out of the loop if any errors are raised */ |
ADIJake | 0:85855ecd3257 | 395 | if (bError) |
ADIJake | 0:85855ecd3257 | 396 | break; |
ADIJake | 0:85855ecd3257 | 397 | } |
ADIJake | 0:85855ecd3257 | 398 | } |
ADIJake | 0:85855ecd3257 | 399 | |
Vkadaba | 5:0728bde67bdb | 400 | if (eOperatingMode == ADMW1001_OPERATING_MODE_SINGLECYCLE) |
ADIJake | 0:85855ecd3257 | 401 | { |
ADIJake | 0:85855ecd3257 | 402 | /* |
ADIJake | 0:85855ecd3257 | 403 | * In this mode, break out of the loop when the measurement command |
ADIJake | 0:85855ecd3257 | 404 | * has completed. |
ADIJake | 0:85855ecd3257 | 405 | * |
ADIJake | 0:85855ecd3257 | 406 | * One option is to check for the expected number of samples to be |
ADIJake | 0:85855ecd3257 | 407 | * returned for the cycle. However, cycles may have variable-length |
ADIJake | 0:85855ecd3257 | 408 | * sequences if the cycleSkipCount option is non-zero for any of the |
ADIJake | 0:85855ecd3257 | 409 | * channels. |
ADIJake | 0:85855ecd3257 | 410 | * |
ADIJake | 0:85855ecd3257 | 411 | * So, instead, we check for the command-running status, which |
ADIJake | 0:85855ecd3257 | 412 | * will de-assert in this mode when the measurement command has |
ADIJake | 0:85855ecd3257 | 413 | * completed a single cycle. |
ADIJake | 0:85855ecd3257 | 414 | */ |
ADIJake | 0:85855ecd3257 | 415 | bool bCommandRunning; |
Vkadaba | 5:0728bde67bdb | 416 | res = admw_GetCommandRunningState(hDevice, &bCommandRunning); |
Vkadaba | 5:0728bde67bdb | 417 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 418 | { |
Vkadaba | 5:0728bde67bdb | 419 | ADMW_LOG_ERROR("Failed to get command-running status"); |
ADIJake | 0:85855ecd3257 | 420 | return res; |
ADIJake | 0:85855ecd3257 | 421 | } |
ADIJake | 0:85855ecd3257 | 422 | |
ADIJake | 0:85855ecd3257 | 423 | if (!bCommandRunning && !bDataReady) |
ADIJake | 0:85855ecd3257 | 424 | break; |
ADIJake | 0:85855ecd3257 | 425 | } |
ADIJake | 0:85855ecd3257 | 426 | } |
ADIJake | 0:85855ecd3257 | 427 | |
Vkadaba | 5:0728bde67bdb | 428 | ADMW_LOG_INFO("Stopping measurement"); |
Vkadaba | 5:0728bde67bdb | 429 | res = admw_StopMeasurement(hDevice); |
Vkadaba | 5:0728bde67bdb | 430 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 431 | { |
Vkadaba | 5:0728bde67bdb | 432 | ADMW_LOG_ERROR("Failed to send stop measurement"); |
ADIJake | 0:85855ecd3257 | 433 | return res; |
ADIJake | 0:85855ecd3257 | 434 | } |
ADIJake | 0:85855ecd3257 | 435 | |
ADIJake | 0:85855ecd3257 | 436 | free(pSampleBuffer); |
ADIJake | 0:85855ecd3257 | 437 | |
ADIJake | 0:85855ecd3257 | 438 | res = utils_deregisterCallbacks(hDevice); |
Vkadaba | 5:0728bde67bdb | 439 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 440 | return res; |
ADIJake | 0:85855ecd3257 | 441 | |
Vkadaba | 5:0728bde67bdb | 442 | return ADMW_SUCCESS; |
ADIJake | 0:85855ecd3257 | 443 | } |
ADIJake | 0:85855ecd3257 | 444 |