ACKme
/
wiconnect-web_setup_example
Simple example demonstrating WiConnect host library web setup feature.
example.cpp
- Committer:
- dan_ackme
- Date:
- 2014-11-27
- Revision:
- 11:3f4ad7cb7bd4
- Parent:
- 10:63f9df429d05
File content as of revision 11:3f4ad7cb7bd4:
/** * @example web_setup/example.cpp * * This is an example of using the web setup network API to * configure the module network credentials remotely. * * It works as follows: * 1. Instantiate the WiConnect Library * 2. Initiate Communication with WiFi Module * 3. Start WebSetup with specified parameters * 4. Wait for web setup webpage to complete * 5. That's it! * * */ /****************************************************************************** * Example Variables */ // This is the name of the WebSetup network // Look for this name in your WiFi settings // (e.g. your phone's list of WiFi networks in the WiFi settings menu) // tip: add double-quotes around SSID to add spaces to name #define WEB_SETUP_SSID "\"WiConnect WebSetup Example\"" // This is the password for the WebSetup network // Leave as empty string (e.g "") to create OPEN network #define WEB_SETUP_PASSWORD "password" /****************************************************************************** * Includes */ // include C library headers #include <stdio.h> // needed for printf // include target specific defines #include "target_config.h" // include the Wiconnect Host Library API header #include "Wiconnect.h" /****************************************************************************** * Global Defines */ // Serial used for printfs to terminal (i.e. NOT used for WiConnect) static Serial consoleSerial(STDIO_UART_TX, STDIO_UART_RX); // Buffer used internally by WiConnect library, note that this is optional static uint8_t wiconnectInternalBuffer[256]; /****************************************************************************** * Starting point of application */ int main(int argc, char **argv) { WiconnectResult result; consoleSerial.baud(115200); // console terminal to 115200 baud //------------------------------------------------------------------------- // STEP 1: Instantiate WiConnect Library //------------------------------------------------------------------------- // Setup wiconnect serial interface configuration // Here we only specify the rx buffer size and not rx buffer pointer, this means // The serial RX buffer will be dynamically allocated SerialConfig serialConfig(WICONNECT_RX_PIN, WICONNECT_TX_PIN, 256, NULL); // Instantiate the Wiconnect library // Here we specify the buffer size AND buffer pointer, this means we're using static allocation Wiconnect wiconnect(serialConfig, sizeof(wiconnectInternalBuffer), wiconnectInternalBuffer, WICONNECT_RESET_PIN); //------------------------------------------------------------------------- // STEP 2: Initiate Communication with WiFi Module //------------------------------------------------------------------------- printf("Initializing WiConnect Library...\r\n"); // Initialize communication with WiFi module if(WICONNECT_FAILED(result, wiconnect.init())) { if(result == WICONNECT_FIRMWARE_OUTDATED) { printf("*** The WiFi firmware is not supported. Run the ota example to update the firmware:\r\n"); printf("https://developer.mbed.org/teams/ACKme/code/wiconnect-ota_example\r\n\r\n"); } else { printf("Failed to initialize communication with WiFi module!\r\n" "Make sure the wires are connected correctly\r\n"); } for(;;); // infinite loop } //------------------------------------------------------------------------- // STEP 3: Start WebSetup with specified parameters //------------------------------------------------------------------------- printf("Starting Websetup...\r\n"); // Start web setup if(wiconnect.startWebSetup(WEB_SETUP_SSID, WEB_SETUP_PASSWORD) != WICONNECT_SUCCESS) { printf("Failed to start web setup\r\n"); for(;;); // infinite loop } //------------------------------------------------------------------------- // STEP 4: Wait for web setup webpage to complete //------------------------------------------------------------------------- printf("Web setup has started.\r\n\r\n"); printf("1. Using your phone (or PC, Mac, Linux, etc.)\r\n connect to the WiFi network: %s\r\n", WEB_SETUP_SSID); printf("2. The password is: %s\r\n", WEB_SETUP_PASSWORD); printf("3. Once connected, open your browser and enter the URL: http://setup.com\r\n"); printf("4. This will bringup a setup page, enter your router's credentials.\r\n"); printf("5. Click the 'Save & Exit' button at the bottom of the webpage\r\n\r\n"); for(;;) { bool isRunning; if(wiconnect.isWebSetupRunning(&isRunning) != WICONNECT_SUCCESS) { printf("Failed to get websetup status\r\n"); for(;;); } delayMs(100); if(!isRunning) break; } //------------------------------------------------------------------------- // STEP 5: Done! //------------------------------------------------------------------------- printf("IP Address: %s\r\n", wiconnect.getIpAddress()); printf("Web setup example has completed!\r\n"); while(true){} // infinite loop }