Host library for controlling a WiConnect enabled Wi-Fi module.
Dependents: wiconnect-ota_example wiconnect-web_setup_example wiconnect-test-console wiconnect-tcp_server_example ... more
api/WiconnectInterface.h@34:2616445d0823, 2014-11-26 (annotated)
- Committer:
- dan_ackme
- Date:
- Wed Nov 26 23:46:00 2014 -0800
- Revision:
- 34:2616445d0823
- Parent:
- 29:b6af04b77a56
- Child:
- 37:5ee74d72efe4
added support for out-dated wifi firmware
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
dan_ackme | 29:b6af04b77a56 | 1 | /** |
dan_ackme | 29:b6af04b77a56 | 2 | * ACKme WiConnect Host Library is licensed under the BSD licence: |
dan_ackme | 29:b6af04b77a56 | 3 | * |
dan_ackme | 29:b6af04b77a56 | 4 | * Copyright (c)2014 ACKme Networks. |
dan_ackme | 29:b6af04b77a56 | 5 | * All rights reserved. |
dan_ackme | 29:b6af04b77a56 | 6 | * |
dan_ackme | 29:b6af04b77a56 | 7 | * Redistribution and use in source and binary forms, with or without modification, |
dan_ackme | 29:b6af04b77a56 | 8 | * are permitted provided that the following conditions are met: |
dan_ackme | 29:b6af04b77a56 | 9 | * |
dan_ackme | 29:b6af04b77a56 | 10 | * 1. Redistributions of source code must retain the above copyright notice, |
dan_ackme | 29:b6af04b77a56 | 11 | * this list of conditions and the following disclaimer. |
dan_ackme | 29:b6af04b77a56 | 12 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
dan_ackme | 29:b6af04b77a56 | 13 | * this list of conditions and the following disclaimer in the documentation |
dan_ackme | 29:b6af04b77a56 | 14 | * and/or other materials provided with the distribution. |
dan_ackme | 29:b6af04b77a56 | 15 | * 3. The name of the author may not be used to endorse or promote products |
dan_ackme | 29:b6af04b77a56 | 16 | * derived from this software without specific prior written permission. |
dan_ackme | 29:b6af04b77a56 | 17 | * |
dan_ackme | 29:b6af04b77a56 | 18 | * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS AND ANY EXPRESS OR IMPLIED |
dan_ackme | 29:b6af04b77a56 | 19 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
dan_ackme | 29:b6af04b77a56 | 20 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT |
dan_ackme | 29:b6af04b77a56 | 21 | * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
dan_ackme | 29:b6af04b77a56 | 22 | * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT |
dan_ackme | 29:b6af04b77a56 | 23 | * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
dan_ackme | 29:b6af04b77a56 | 24 | * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
dan_ackme | 29:b6af04b77a56 | 25 | * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
dan_ackme | 29:b6af04b77a56 | 26 | * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY |
dan_ackme | 29:b6af04b77a56 | 27 | * OF SUCH DAMAGE. |
dan_ackme | 29:b6af04b77a56 | 28 | */ |
dan_ackme | 29:b6af04b77a56 | 29 | #pragma once |
dan_ackme | 29:b6af04b77a56 | 30 | |
dan_ackme | 29:b6af04b77a56 | 31 | #include "WiconnectTypes.h" |
dan_ackme | 29:b6af04b77a56 | 32 | |
dan_ackme | 29:b6af04b77a56 | 33 | |
dan_ackme | 29:b6af04b77a56 | 34 | #include "types/LogFunc.h" |
dan_ackme | 29:b6af04b77a56 | 35 | #include "types/ReaderFunc.h" |
dan_ackme | 29:b6af04b77a56 | 36 | #include "types/Callback.h" |
dan_ackme | 29:b6af04b77a56 | 37 | #include "types/TimeoutTimer.h" |
dan_ackme | 29:b6af04b77a56 | 38 | #include "types/PeriodicTimer.h" |
dan_ackme | 29:b6af04b77a56 | 39 | #include "types/Gpio.h" |
dan_ackme | 29:b6af04b77a56 | 40 | #include "types/WiconnectSerial.h" |
dan_ackme | 29:b6af04b77a56 | 41 | |
dan_ackme | 29:b6af04b77a56 | 42 | #ifdef WICONNECT_ASYNC_TIMER_ENABLED |
dan_ackme | 29:b6af04b77a56 | 43 | #include "types/QueuedCommand.h" |
dan_ackme | 29:b6af04b77a56 | 44 | #include "types/CommandQueue.h" |
dan_ackme | 29:b6af04b77a56 | 45 | #endif |
dan_ackme | 29:b6af04b77a56 | 46 | |
dan_ackme | 29:b6af04b77a56 | 47 | #include "NetworkInterface.h" |
dan_ackme | 29:b6af04b77a56 | 48 | #include "SocketInterface.h" |
dan_ackme | 29:b6af04b77a56 | 49 | #include "FileInterface.h" |
dan_ackme | 29:b6af04b77a56 | 50 | #include "GhmInterface.h" |
dan_ackme | 29:b6af04b77a56 | 51 | |
dan_ackme | 29:b6af04b77a56 | 52 | |
dan_ackme | 29:b6af04b77a56 | 53 | #ifdef WICONNECT_ENABLE_MALLOC |
dan_ackme | 29:b6af04b77a56 | 54 | /// These are optional arguments for host specific malloc/free |
dan_ackme | 29:b6af04b77a56 | 55 | #define WICONNECT_MALLOC_ARGS , void* (*malloc_)(size_t) = WICONNECT_DEFAULT_MALLOC, void (*free_)(void*) = WICONNECT_DEFAULT_FREE |
dan_ackme | 29:b6af04b77a56 | 56 | #else |
dan_ackme | 29:b6af04b77a56 | 57 | #define WICONNECT_MALLOC_ARGS |
dan_ackme | 29:b6af04b77a56 | 58 | #endif |
dan_ackme | 29:b6af04b77a56 | 59 | |
dan_ackme | 29:b6af04b77a56 | 60 | |
dan_ackme | 29:b6af04b77a56 | 61 | /** |
dan_ackme | 29:b6af04b77a56 | 62 | * @namespace wiconnect |
dan_ackme | 29:b6af04b77a56 | 63 | */ |
dan_ackme | 29:b6af04b77a56 | 64 | namespace wiconnect { |
dan_ackme | 29:b6af04b77a56 | 65 | |
dan_ackme | 29:b6af04b77a56 | 66 | |
dan_ackme | 29:b6af04b77a56 | 67 | /** |
dan_ackme | 29:b6af04b77a56 | 68 | * @ingroup api_core_types |
dan_ackme | 29:b6af04b77a56 | 69 | * |
dan_ackme | 29:b6af04b77a56 | 70 | * @brief The root WiConnect library class. This class |
dan_ackme | 29:b6af04b77a56 | 71 | * inheriets all WiConnect functionality. |
dan_ackme | 29:b6af04b77a56 | 72 | * |
dan_ackme | 29:b6af04b77a56 | 73 | * This class is implemented as a 'singleton'. This means it |
dan_ackme | 29:b6af04b77a56 | 74 | * only needs to be instantiated once. Subsequent class may either |
dan_ackme | 29:b6af04b77a56 | 75 | * use the class instance or the static function: @ref Wiconnect::getInstance() |
dan_ackme | 29:b6af04b77a56 | 76 | * |
dan_ackme | 29:b6af04b77a56 | 77 | */ |
dan_ackme | 29:b6af04b77a56 | 78 | class Wiconnect : public NetworkInterface, |
dan_ackme | 29:b6af04b77a56 | 79 | public SocketInterface, |
dan_ackme | 29:b6af04b77a56 | 80 | public FileInterface, |
dan_ackme | 29:b6af04b77a56 | 81 | public GhmInterface |
dan_ackme | 29:b6af04b77a56 | 82 | { |
dan_ackme | 29:b6af04b77a56 | 83 | public: |
dan_ackme | 29:b6af04b77a56 | 84 | |
dan_ackme | 29:b6af04b77a56 | 85 | /** |
dan_ackme | 29:b6af04b77a56 | 86 | * @brief WiConnect class constructor |
dan_ackme | 29:b6af04b77a56 | 87 | * |
dan_ackme | 29:b6af04b77a56 | 88 | * @note This should only be called once within a program as the WiConnect |
dan_ackme | 29:b6af04b77a56 | 89 | * library is implemented as a singleton. |
dan_ackme | 29:b6af04b77a56 | 90 | * |
dan_ackme | 29:b6af04b77a56 | 91 | * @note If this constructor is used, then all commands must be supplied with an external response buffer. |
dan_ackme | 29:b6af04b77a56 | 92 | * This means most the API functions will not work as they use the internal buffer. |
dan_ackme | 29:b6af04b77a56 | 93 | * It's recommended to use the other constructor that supplies an internal buffer. See @ref setting_alloc |
dan_ackme | 29:b6af04b77a56 | 94 | * |
dan_ackme | 29:b6af04b77a56 | 95 | * @param[in] serialConfig The serial (i.e. UART) configuration connected to a WiConnect module. |
dan_ackme | 29:b6af04b77a56 | 96 | * @param[in] reset Optional, The pin connected to the WiConnect module reset signal. Default: No connection |
dan_ackme | 29:b6af04b77a56 | 97 | * @param[in] wake Optional, The pin connected to the WiConnect module wake signal. Default: No connection |
dan_ackme | 29:b6af04b77a56 | 98 | * @param[in] nonBlocking Optional, indicates if the API blocking mode. See @ref setting_blocking_modes |
dan_ackme | 29:b6af04b77a56 | 99 | */ |
dan_ackme | 29:b6af04b77a56 | 100 | Wiconnect(const SerialConfig &serialConfig, Pin reset = PIN_NC, Pin wake = PIN_NC, bool nonBlocking = WICONNECT_DEFAULT_NONBLOCKING WICONNECT_MALLOC_ARGS); |
dan_ackme | 29:b6af04b77a56 | 101 | |
dan_ackme | 29:b6af04b77a56 | 102 | /** |
dan_ackme | 29:b6af04b77a56 | 103 | * @brief WiConnect class constructor |
dan_ackme | 29:b6af04b77a56 | 104 | * |
dan_ackme | 29:b6af04b77a56 | 105 | * @note This should only be called once within a program as the WiConnect |
dan_ackme | 29:b6af04b77a56 | 106 | * library is implemented as a singleton. |
dan_ackme | 29:b6af04b77a56 | 107 | * |
dan_ackme | 29:b6af04b77a56 | 108 | * @note This is the recommended construstor as it supplies the WiConnect library with an |
dan_ackme | 29:b6af04b77a56 | 109 | * internal buffer. Most API calls require the internal buffer. |
dan_ackme | 29:b6af04b77a56 | 110 | * |
dan_ackme | 29:b6af04b77a56 | 111 | * @param[in] serialConfig The serial (i.e. UART) configuration connected to a WiConnect module. |
dan_ackme | 29:b6af04b77a56 | 112 | * @param[in] internalBufferSize The size of the internal buffer. If internalBuffer is NULL, then this size will be dynamically allocated. See @ref setting_alloc |
dan_ackme | 29:b6af04b77a56 | 113 | * @param[in] internalBuffer Optional, a user allocated buffer. See @ref setting_alloc |
dan_ackme | 29:b6af04b77a56 | 114 | * @param[in] reset Optional, The pin connected to the WiConnect module reset signal. Default: No connection |
dan_ackme | 29:b6af04b77a56 | 115 | * @param[in] wake Optional, The pin connected to the WiConnect module wake signal. Default: No connection |
dan_ackme | 29:b6af04b77a56 | 116 | * @param[in] nonBlocking Optional, indicates if the API blocking mode. See @ref setting_blocking_modes |
dan_ackme | 29:b6af04b77a56 | 117 | */ |
dan_ackme | 29:b6af04b77a56 | 118 | Wiconnect(const SerialConfig &serialConfig, int internalBufferSize, void *internalBuffer = NULL, Pin reset = PIN_NC, Pin wake = PIN_NC, bool nonBlocking = WICONNECT_DEFAULT_NONBLOCKING WICONNECT_MALLOC_ARGS); |
dan_ackme | 29:b6af04b77a56 | 119 | ~Wiconnect(); |
dan_ackme | 29:b6af04b77a56 | 120 | |
dan_ackme | 29:b6af04b77a56 | 121 | |
dan_ackme | 29:b6af04b77a56 | 122 | // ------------------------------------------------------------------------ |
dan_ackme | 29:b6af04b77a56 | 123 | |
dan_ackme | 29:b6af04b77a56 | 124 | |
dan_ackme | 29:b6af04b77a56 | 125 | /** |
dan_ackme | 29:b6af04b77a56 | 126 | * @ingroup api_core_misc |
dan_ackme | 29:b6af04b77a56 | 127 | * |
dan_ackme | 29:b6af04b77a56 | 128 | * @brief Get instance of previously instantiated Wiconnect Library |
dan_ackme | 29:b6af04b77a56 | 129 | * |
dan_ackme | 29:b6af04b77a56 | 130 | * @return Pointer to instance of @ref Wiconnect Library. |
dan_ackme | 29:b6af04b77a56 | 131 | */ |
dan_ackme | 29:b6af04b77a56 | 132 | static Wiconnect* getInstance(); |
dan_ackme | 29:b6af04b77a56 | 133 | |
dan_ackme | 29:b6af04b77a56 | 134 | /** |
dan_ackme | 29:b6af04b77a56 | 135 | * @ingroup api_core_misc |
dan_ackme | 29:b6af04b77a56 | 136 | * |
dan_ackme | 29:b6af04b77a56 | 137 | * @brief Initialize library and communication link with WiConnect WiFi module. |
dan_ackme | 29:b6af04b77a56 | 138 | * |
dan_ackme | 29:b6af04b77a56 | 139 | * @note This function is always blocking regardless of configured mode. |
dan_ackme | 29:b6af04b77a56 | 140 | * |
dan_ackme | 29:b6af04b77a56 | 141 | * @param[in] bringNetworkUp Flag indicating if the module should try to bring the network up upon initialization. |
dan_ackme | 29:b6af04b77a56 | 142 | * @return Result of initialization. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 143 | */ |
dan_ackme | 29:b6af04b77a56 | 144 | WiconnectResult init(bool bringNetworkUp=false); |
dan_ackme | 29:b6af04b77a56 | 145 | |
dan_ackme | 29:b6af04b77a56 | 146 | /** |
dan_ackme | 29:b6af04b77a56 | 147 | * @ingroup api_core_misc |
dan_ackme | 29:b6af04b77a56 | 148 | * |
dan_ackme | 29:b6af04b77a56 | 149 | * @brief De-initialize library. |
dan_ackme | 29:b6af04b77a56 | 150 | */ |
dan_ackme | 29:b6af04b77a56 | 151 | void deinit(); |
dan_ackme | 29:b6af04b77a56 | 152 | |
dan_ackme | 29:b6af04b77a56 | 153 | /** |
dan_ackme | 29:b6af04b77a56 | 154 | * @ingroup api_core_misc |
dan_ackme | 29:b6af04b77a56 | 155 | * |
dan_ackme | 29:b6af04b77a56 | 156 | * @brief Return TRUE if library is able to communicated with WiConnect WiFi module. |
dan_ackme | 29:b6af04b77a56 | 157 | * FALSE else. |
dan_ackme | 29:b6af04b77a56 | 158 | * |
dan_ackme | 29:b6af04b77a56 | 159 | * @return TRUE if library can communicate with WiFi module, FALSE else. |
dan_ackme | 29:b6af04b77a56 | 160 | */ |
dan_ackme | 29:b6af04b77a56 | 161 | bool isInitialized(); |
dan_ackme | 29:b6af04b77a56 | 162 | |
dan_ackme | 29:b6af04b77a56 | 163 | /** |
dan_ackme | 29:b6af04b77a56 | 164 | * @ingroup api_core_misc |
dan_ackme | 29:b6af04b77a56 | 165 | * |
dan_ackme | 34:2616445d0823 | 166 | * @brief Return TRUE if the WiFi module's firmware supports the SDK version, |
dan_ackme | 34:2616445d0823 | 167 | * FALSE if the WiFi module's firmware needs to be updated. See |
dan_ackme | 34:2616445d0823 | 168 | * @ref updateFirmware() to update the module's firmware. |
dan_ackme | 34:2616445d0823 | 169 | * |
dan_ackme | 34:2616445d0823 | 170 | * @return TRUE WiFi firmware version is supported, FALSE else |
dan_ackme | 34:2616445d0823 | 171 | */ |
dan_ackme | 34:2616445d0823 | 172 | bool updateRequired(); |
dan_ackme | 34:2616445d0823 | 173 | |
dan_ackme | 34:2616445d0823 | 174 | /** |
dan_ackme | 34:2616445d0823 | 175 | * @ingroup api_core_misc |
dan_ackme | 34:2616445d0823 | 176 | * |
dan_ackme | 29:b6af04b77a56 | 177 | * @brief Toggle the WiConnect WiFi module reset signal. |
dan_ackme | 29:b6af04b77a56 | 178 | * |
dan_ackme | 29:b6af04b77a56 | 179 | * @note This only resets the module if the library was instantiated with the 'reset' pin |
dan_ackme | 29:b6af04b77a56 | 180 | * parameter in the Wiconnect::Wiconnect constructor. |
dan_ackme | 29:b6af04b77a56 | 181 | * @note This method is always blocking. A small (1s) delay is added to ensure the module |
dan_ackme | 29:b6af04b77a56 | 182 | * has returned from reset and ready. |
dan_ackme | 29:b6af04b77a56 | 183 | * |
dan_ackme | 29:b6af04b77a56 | 184 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 185 | */ |
dan_ackme | 29:b6af04b77a56 | 186 | WiconnectResult reset(); |
dan_ackme | 29:b6af04b77a56 | 187 | |
dan_ackme | 29:b6af04b77a56 | 188 | /** |
dan_ackme | 29:b6af04b77a56 | 189 | * @ingroup api_core_misc |
dan_ackme | 29:b6af04b77a56 | 190 | * |
dan_ackme | 29:b6af04b77a56 | 191 | * @brief Toggle the WiConnect WiFi moduel wakeup signal. |
dan_ackme | 29:b6af04b77a56 | 192 | * |
dan_ackme | 29:b6af04b77a56 | 193 | * @note This only wakes the module if the library was instantiated with the 'wake' pin |
dan_ackme | 29:b6af04b77a56 | 194 | * parameter in the Wiconnect::Wiconnect constructor. |
dan_ackme | 29:b6af04b77a56 | 195 | * @note This method is always blocking. |
dan_ackme | 29:b6af04b77a56 | 196 | * |
dan_ackme | 29:b6af04b77a56 | 197 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 198 | */ |
dan_ackme | 29:b6af04b77a56 | 199 | WiconnectResult wakeup(); |
dan_ackme | 29:b6af04b77a56 | 200 | |
dan_ackme | 29:b6af04b77a56 | 201 | /** |
dan_ackme | 29:b6af04b77a56 | 202 | * @ingroup api_core_misc |
dan_ackme | 29:b6af04b77a56 | 203 | * |
dan_ackme | 29:b6af04b77a56 | 204 | * @brief Flush any received data in serial RX buffer and terminate any commands on WiConnect WiFi module. |
dan_ackme | 29:b6af04b77a56 | 205 | * |
dan_ackme | 29:b6af04b77a56 | 206 | * The delayMs parameter is used as the delay between terminating commands on the module and flushing |
dan_ackme | 29:b6af04b77a56 | 207 | * the serial RX buffer. This is needed because after terminating commands on the module, the module will |
dan_ackme | 29:b6af04b77a56 | 208 | * returns a response. These responses are invalid at this point and should be flushed from the serial RX buffer. |
dan_ackme | 29:b6af04b77a56 | 209 | * |
dan_ackme | 29:b6af04b77a56 | 210 | * @param[in] delayMs Optional, if not specificed this only flushes the serial RX buffer. |
dan_ackme | 29:b6af04b77a56 | 211 | */ |
dan_ackme | 29:b6af04b77a56 | 212 | void flush(int delayMs = 500); |
dan_ackme | 29:b6af04b77a56 | 213 | |
dan_ackme | 29:b6af04b77a56 | 214 | /** |
dan_ackme | 29:b6af04b77a56 | 215 | * @ingroup api_core_misc |
dan_ackme | 29:b6af04b77a56 | 216 | * |
dan_ackme | 29:b6af04b77a56 | 217 | * @brief Return current version of WiConnect WiFi module. |
dan_ackme | 29:b6af04b77a56 | 218 | * @param[in] versionBuffer Optional, Buffer to hold received version string |
dan_ackme | 29:b6af04b77a56 | 219 | * @param[in] versionBufferSize Optional, required if versionBuffer specified. |
dan_ackme | 29:b6af04b77a56 | 220 | * @param[in] completeCallback Optional, callback when version is received. arg1 of callback contains version buffer pointer. |
dan_ackme | 29:b6af04b77a56 | 221 | * |
dan_ackme | 29:b6af04b77a56 | 222 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 223 | */ |
dan_ackme | 29:b6af04b77a56 | 224 | WiconnectResult getVersion(char *versionBuffer = NULL, int versionBufferSize = 0, const Callback &completeCallback = Callback()); |
dan_ackme | 29:b6af04b77a56 | 225 | |
dan_ackme | 29:b6af04b77a56 | 226 | |
dan_ackme | 29:b6af04b77a56 | 227 | /** |
dan_ackme | 29:b6af04b77a56 | 228 | * @ingroup api_core_misc |
dan_ackme | 29:b6af04b77a56 | 229 | * |
dan_ackme | 29:b6af04b77a56 | 230 | * @brief Update the wifi module's internal firmware. |
dan_ackme | 29:b6af04b77a56 | 231 | * @param[in] forced Optional, If true, force update of all firmware files to latest version, else only update out-dated files. |
dan_ackme | 29:b6af04b77a56 | 232 | * @param[in] versionStr Optional, If specified, update to specific firmware version, else update to latest version. |
dan_ackme | 29:b6af04b77a56 | 233 | * @param[in] completeCallback Optional, callback when update is complete. 'result' callback argument contains result of update. |
dan_ackme | 29:b6af04b77a56 | 234 | * |
dan_ackme | 29:b6af04b77a56 | 235 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 236 | */ |
dan_ackme | 29:b6af04b77a56 | 237 | WiconnectResult updateFirmware(bool forced = false, const char *versionStr = NULL, const Callback &completeCallback = Callback()); |
dan_ackme | 29:b6af04b77a56 | 238 | |
dan_ackme | 29:b6af04b77a56 | 239 | |
dan_ackme | 29:b6af04b77a56 | 240 | // ------------------------------------------------------------------------ |
dan_ackme | 29:b6af04b77a56 | 241 | |
dan_ackme | 29:b6af04b77a56 | 242 | |
dan_ackme | 29:b6af04b77a56 | 243 | /** |
dan_ackme | 29:b6af04b77a56 | 244 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 245 | * |
dan_ackme | 29:b6af04b77a56 | 246 | * @brief Send command to WiConnect WiFi module |
dan_ackme | 29:b6af04b77a56 | 247 | * |
dan_ackme | 29:b6af04b77a56 | 248 | * @note Refer to @ref send_command_desc for more info |
dan_ackme | 29:b6af04b77a56 | 249 | * |
dan_ackme | 29:b6af04b77a56 | 250 | * @param[in] completeCallback Callback when command completes. arg1 of callback contains responseBuffer pointer, arg2 contains the response length |
dan_ackme | 29:b6af04b77a56 | 251 | * @param[in] responseBuffer Buffer to hold command response |
dan_ackme | 29:b6af04b77a56 | 252 | * @param[in] responseBufferLen Length of responseBuffer |
dan_ackme | 29:b6af04b77a56 | 253 | * @param[in] timeoutMs Maximum time in milliseconds this command should execute |
dan_ackme | 29:b6af04b77a56 | 254 | * @param[in] reader Callback for reading data to be read from host and send to module during command |
dan_ackme | 29:b6af04b77a56 | 255 | * @param[in] user User data struct used during read Callback. Library doesn't use this. Set NULL if not used. |
dan_ackme | 29:b6af04b77a56 | 256 | * @param[in] cmd WiConnect command to send to module |
dan_ackme | 29:b6af04b77a56 | 257 | * @param[in] vaList Varaible list of arguments |
dan_ackme | 29:b6af04b77a56 | 258 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 259 | */ |
dan_ackme | 29:b6af04b77a56 | 260 | WiconnectResult sendCommand(const Callback &completeCallback, char *responseBuffer, int responseBufferLen, |
dan_ackme | 29:b6af04b77a56 | 261 | TimerTimeout timeoutMs, const ReaderFunc &reader, void *user, const char *cmd, va_list vaList); |
dan_ackme | 29:b6af04b77a56 | 262 | /** |
dan_ackme | 29:b6af04b77a56 | 263 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 264 | * |
dan_ackme | 29:b6af04b77a56 | 265 | * @brief Send command to WiConnect WiFi module |
dan_ackme | 29:b6af04b77a56 | 266 | * |
dan_ackme | 29:b6af04b77a56 | 267 | * @note Refer to @ref send_command_desc for more info |
dan_ackme | 29:b6af04b77a56 | 268 | * |
dan_ackme | 29:b6af04b77a56 | 269 | * @param[in] responseBuffer Buffer to hold command response |
dan_ackme | 29:b6af04b77a56 | 270 | * @param[in] responseBufferLen Length of responseBuffer |
dan_ackme | 29:b6af04b77a56 | 271 | * @param[in] timeoutMs Maximum time in milliseconds this command should execute |
dan_ackme | 29:b6af04b77a56 | 272 | * @param[in] reader Callback for reading data to be read from host and send to module during command |
dan_ackme | 29:b6af04b77a56 | 273 | * @param[in] user User data struct used during read Callback. Library doesn't use this. Set NULL if not used. |
dan_ackme | 29:b6af04b77a56 | 274 | * @param[in] cmd WiConnect command to send to module |
dan_ackme | 29:b6af04b77a56 | 275 | * @param[in] vaList Varaible list of arguments |
dan_ackme | 29:b6af04b77a56 | 276 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 277 | */ |
dan_ackme | 29:b6af04b77a56 | 278 | WiconnectResult sendCommand(char *responseBuffer, int responseBufferLen, TimerTimeout timeoutMs, const ReaderFunc &reader, |
dan_ackme | 29:b6af04b77a56 | 279 | void *user, const char *cmd, va_list vaList); |
dan_ackme | 29:b6af04b77a56 | 280 | |
dan_ackme | 29:b6af04b77a56 | 281 | /** |
dan_ackme | 29:b6af04b77a56 | 282 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 283 | * |
dan_ackme | 29:b6af04b77a56 | 284 | * @brief Send command to WiConnect WiFi module |
dan_ackme | 29:b6af04b77a56 | 285 | * |
dan_ackme | 29:b6af04b77a56 | 286 | * @note Refer to @ref send_command_desc for more info |
dan_ackme | 29:b6af04b77a56 | 287 | * @note This method supports variable arguments |
dan_ackme | 29:b6af04b77a56 | 288 | * |
dan_ackme | 29:b6af04b77a56 | 289 | * @param[in] responseBuffer Buffer to hold command response |
dan_ackme | 29:b6af04b77a56 | 290 | * @param[in] responseBufferLen Length of responseBuffer |
dan_ackme | 29:b6af04b77a56 | 291 | * @param[in] timeoutMs Maximum time in milliseconds this command should execute |
dan_ackme | 29:b6af04b77a56 | 292 | * @param[in] reader Callback for reading data to be read from host and send to module during command |
dan_ackme | 29:b6af04b77a56 | 293 | * @param[in] user User data struct used during read Callback. Library doesn't use this. Set NULL if not used. |
dan_ackme | 29:b6af04b77a56 | 294 | * @param[in] cmd WiConnect command to send to module |
dan_ackme | 29:b6af04b77a56 | 295 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 296 | */ |
dan_ackme | 29:b6af04b77a56 | 297 | WiconnectResult sendCommand(char *responseBuffer, int responseBufferLen, TimerTimeout timeoutMs, const ReaderFunc &reader, |
dan_ackme | 29:b6af04b77a56 | 298 | void *user, const char *cmd, ...); |
dan_ackme | 29:b6af04b77a56 | 299 | |
dan_ackme | 29:b6af04b77a56 | 300 | /** |
dan_ackme | 29:b6af04b77a56 | 301 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 302 | * |
dan_ackme | 29:b6af04b77a56 | 303 | * @brief Send command to WiConnect WiFi module |
dan_ackme | 29:b6af04b77a56 | 304 | * |
dan_ackme | 29:b6af04b77a56 | 305 | * This method uses the library internal buffer. |
dan_ackme | 29:b6af04b77a56 | 306 | * |
dan_ackme | 29:b6af04b77a56 | 307 | * @note Refer to @ref send_command_desc for more info |
dan_ackme | 29:b6af04b77a56 | 308 | * @note This method supports variable arguments |
dan_ackme | 29:b6af04b77a56 | 309 | * |
dan_ackme | 29:b6af04b77a56 | 310 | * @param[in] timeoutMs Maximum time in milliseconds this command should execute |
dan_ackme | 29:b6af04b77a56 | 311 | * @param[in] reader Callback for reading data to be read from host and send to module during command |
dan_ackme | 29:b6af04b77a56 | 312 | * @param[in] user User data struct used during read Callback. Library doesn't use this. Set NULL if not used. |
dan_ackme | 29:b6af04b77a56 | 313 | * @param[in] cmd WiConnect command to send to module |
dan_ackme | 29:b6af04b77a56 | 314 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 315 | */ |
dan_ackme | 29:b6af04b77a56 | 316 | WiconnectResult sendCommand(TimerTimeout timeoutMs, const ReaderFunc &reader, void *user, const char *cmd, ...); |
dan_ackme | 29:b6af04b77a56 | 317 | |
dan_ackme | 29:b6af04b77a56 | 318 | /** |
dan_ackme | 29:b6af04b77a56 | 319 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 320 | * |
dan_ackme | 29:b6af04b77a56 | 321 | * @brief Send command to WiConnect WiFi module |
dan_ackme | 29:b6af04b77a56 | 322 | * |
dan_ackme | 29:b6af04b77a56 | 323 | * - This method uses the library internal buffer and |
dan_ackme | 29:b6af04b77a56 | 324 | * - default timeout. See setCommandDefaultTimeout() |
dan_ackme | 29:b6af04b77a56 | 325 | * |
dan_ackme | 29:b6af04b77a56 | 326 | * @note Refer to @ref send_command_desc for more info |
dan_ackme | 29:b6af04b77a56 | 327 | * @note This method supports variable arguments |
dan_ackme | 29:b6af04b77a56 | 328 | * |
dan_ackme | 29:b6af04b77a56 | 329 | * @param[in] reader Callback for reading data to be read from host and send to module during command |
dan_ackme | 29:b6af04b77a56 | 330 | * @param[in] user User data struct used during read Callback. Library doesn't use this. Set NULL if not used. |
dan_ackme | 29:b6af04b77a56 | 331 | * @param[in] cmd WiConnect command to send to module |
dan_ackme | 29:b6af04b77a56 | 332 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 333 | */ |
dan_ackme | 29:b6af04b77a56 | 334 | WiconnectResult sendCommand(const ReaderFunc &reader, void *user, const char *cmd, ...); |
dan_ackme | 29:b6af04b77a56 | 335 | |
dan_ackme | 29:b6af04b77a56 | 336 | /** |
dan_ackme | 29:b6af04b77a56 | 337 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 338 | * |
dan_ackme | 29:b6af04b77a56 | 339 | * @brief Send command to WiConnect WiFi module |
dan_ackme | 29:b6af04b77a56 | 340 | * |
dan_ackme | 29:b6af04b77a56 | 341 | * @note Refer to @ref send_command_desc for more info |
dan_ackme | 29:b6af04b77a56 | 342 | * @note This method supports variable arguments |
dan_ackme | 29:b6af04b77a56 | 343 | * |
dan_ackme | 29:b6af04b77a56 | 344 | * @param[in] responseBuffer Buffer to hold command response |
dan_ackme | 29:b6af04b77a56 | 345 | * @param[in] responseBufferLen Length of responseBuffer |
dan_ackme | 29:b6af04b77a56 | 346 | * @param[in] timeoutMs Maximum time in milliseconds this command should execute |
dan_ackme | 29:b6af04b77a56 | 347 | * @param[in] cmd WiConnect command to send to module |
dan_ackme | 29:b6af04b77a56 | 348 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 349 | */ |
dan_ackme | 29:b6af04b77a56 | 350 | WiconnectResult sendCommand(char *responseBuffer, int responseBufferLen, TimerTimeout timeoutMs, const char *cmd, ...); |
dan_ackme | 29:b6af04b77a56 | 351 | |
dan_ackme | 29:b6af04b77a56 | 352 | /** |
dan_ackme | 29:b6af04b77a56 | 353 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 354 | * |
dan_ackme | 29:b6af04b77a56 | 355 | * @brief Send command to WiConnect WiFi module |
dan_ackme | 29:b6af04b77a56 | 356 | * |
dan_ackme | 29:b6af04b77a56 | 357 | * @note Refer to @ref send_command_desc for more info |
dan_ackme | 29:b6af04b77a56 | 358 | * @note This method supports variable arguments |
dan_ackme | 29:b6af04b77a56 | 359 | * |
dan_ackme | 29:b6af04b77a56 | 360 | * @param[in] completeCallback Callback when command completes. arg1 of callback contains responseBuffer pointer, arg2 contains the response length |
dan_ackme | 29:b6af04b77a56 | 361 | * @param[in] responseBuffer Buffer to hold command response |
dan_ackme | 29:b6af04b77a56 | 362 | * @param[in] responseBufferLen Length of responseBuffer |
dan_ackme | 29:b6af04b77a56 | 363 | * @param[in] cmd WiConnect command to send to module |
dan_ackme | 29:b6af04b77a56 | 364 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 365 | */ |
dan_ackme | 29:b6af04b77a56 | 366 | WiconnectResult sendCommand(const Callback &completeCallback, char *responseBuffer, int responseBufferLen, const char *cmd, ...); |
dan_ackme | 29:b6af04b77a56 | 367 | |
dan_ackme | 29:b6af04b77a56 | 368 | /** |
dan_ackme | 29:b6af04b77a56 | 369 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 370 | * |
dan_ackme | 29:b6af04b77a56 | 371 | * @brief Send command to WiConnect WiFi module |
dan_ackme | 29:b6af04b77a56 | 372 | * |
dan_ackme | 29:b6af04b77a56 | 373 | * @note Refer to @ref send_command_desc for more info |
dan_ackme | 29:b6af04b77a56 | 374 | * @note This method supports variable arguments |
dan_ackme | 29:b6af04b77a56 | 375 | * |
dan_ackme | 29:b6af04b77a56 | 376 | * @param[in] responseBuffer Buffer to hold command response |
dan_ackme | 29:b6af04b77a56 | 377 | * @param[in] responseBufferLen Length of responseBuffer |
dan_ackme | 29:b6af04b77a56 | 378 | * @param[in] cmd WiConnect command to send to module |
dan_ackme | 29:b6af04b77a56 | 379 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 380 | */ |
dan_ackme | 29:b6af04b77a56 | 381 | WiconnectResult sendCommand(char *responseBuffer, int responseBufferLen, const char *cmd, ...); |
dan_ackme | 29:b6af04b77a56 | 382 | |
dan_ackme | 29:b6af04b77a56 | 383 | /** |
dan_ackme | 29:b6af04b77a56 | 384 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 385 | * |
dan_ackme | 29:b6af04b77a56 | 386 | * @brief Send command to WiConnect WiFi module |
dan_ackme | 29:b6af04b77a56 | 387 | * |
dan_ackme | 29:b6af04b77a56 | 388 | * - This method uses the library internal buffer and |
dan_ackme | 29:b6af04b77a56 | 389 | * - default timeout. See setCommandDefaultTimeout() |
dan_ackme | 29:b6af04b77a56 | 390 | * |
dan_ackme | 29:b6af04b77a56 | 391 | * @note Refer to @ref send_command_desc for more info |
dan_ackme | 29:b6af04b77a56 | 392 | * @note This method supports variable arguments |
dan_ackme | 29:b6af04b77a56 | 393 | * |
dan_ackme | 29:b6af04b77a56 | 394 | * @param[in] completeCallback Callback when command completes. arg1 of callback contains responseBuffer pointer, arg2 contains the response length |
dan_ackme | 29:b6af04b77a56 | 395 | * @param[in] cmd WiConnect command to send to module |
dan_ackme | 29:b6af04b77a56 | 396 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 397 | */ |
dan_ackme | 29:b6af04b77a56 | 398 | WiconnectResult sendCommand(const Callback &completeCallback, const char *cmd, ...); |
dan_ackme | 29:b6af04b77a56 | 399 | |
dan_ackme | 29:b6af04b77a56 | 400 | /** |
dan_ackme | 29:b6af04b77a56 | 401 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 402 | * |
dan_ackme | 29:b6af04b77a56 | 403 | * @brief Send command to WiConnect WiFi module |
dan_ackme | 29:b6af04b77a56 | 404 | * |
dan_ackme | 29:b6af04b77a56 | 405 | * - This method uses the library internal buffer and |
dan_ackme | 29:b6af04b77a56 | 406 | * - default timeout. See setCommandDefaultTimeout() |
dan_ackme | 29:b6af04b77a56 | 407 | * |
dan_ackme | 29:b6af04b77a56 | 408 | * @note Refer to @ref send_command_desc for more info |
dan_ackme | 29:b6af04b77a56 | 409 | * @note This method supports variable arguments |
dan_ackme | 29:b6af04b77a56 | 410 | * |
dan_ackme | 29:b6af04b77a56 | 411 | * @param[in] cmd WiConnect command to send to module |
dan_ackme | 29:b6af04b77a56 | 412 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 413 | */ |
dan_ackme | 29:b6af04b77a56 | 414 | WiconnectResult sendCommand(const char *cmd, ...); |
dan_ackme | 29:b6af04b77a56 | 415 | |
dan_ackme | 29:b6af04b77a56 | 416 | /** |
dan_ackme | 29:b6af04b77a56 | 417 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 418 | * |
dan_ackme | 29:b6af04b77a56 | 419 | * This method uses the library internal buffer |
dan_ackme | 29:b6af04b77a56 | 420 | * |
dan_ackme | 29:b6af04b77a56 | 421 | * @note Refer to @ref send_command_desc for more info |
dan_ackme | 29:b6af04b77a56 | 422 | * @note This method supports variable arguments |
dan_ackme | 29:b6af04b77a56 | 423 | * |
dan_ackme | 29:b6af04b77a56 | 424 | * @param[in] completeCallback Callback when command completes. arg1 of callback contains responseBuffer pointer, arg2 contains the response length |
dan_ackme | 29:b6af04b77a56 | 425 | * @param[in] timeoutMs Maximum time in milliseconds this command should execute |
dan_ackme | 29:b6af04b77a56 | 426 | * @param[in] cmd WiConnect command to send to module |
dan_ackme | 29:b6af04b77a56 | 427 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 428 | */ |
dan_ackme | 29:b6af04b77a56 | 429 | WiconnectResult sendCommand(const Callback &completeCallback, TimerTimeout timeoutMs, const char *cmd, ...); |
dan_ackme | 29:b6af04b77a56 | 430 | |
dan_ackme | 29:b6af04b77a56 | 431 | /** |
dan_ackme | 29:b6af04b77a56 | 432 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 433 | * |
dan_ackme | 29:b6af04b77a56 | 434 | * @brief Send command to WiConnect WiFi module |
dan_ackme | 29:b6af04b77a56 | 435 | * |
dan_ackme | 29:b6af04b77a56 | 436 | * This method uses the library internal buffer |
dan_ackme | 29:b6af04b77a56 | 437 | * |
dan_ackme | 29:b6af04b77a56 | 438 | * @note Refer to @ref send_command_desc for more info |
dan_ackme | 29:b6af04b77a56 | 439 | * @note This method supports variable arguments |
dan_ackme | 29:b6af04b77a56 | 440 | * |
dan_ackme | 29:b6af04b77a56 | 441 | * @param[in] timeoutMs Maximum time in milliseconds this command should execute |
dan_ackme | 29:b6af04b77a56 | 442 | * @param[in] cmd WiConnect command to send to module |
dan_ackme | 29:b6af04b77a56 | 443 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 444 | */ |
dan_ackme | 29:b6af04b77a56 | 445 | WiconnectResult sendCommand(TimerTimeout timeoutMs, const char *cmd, ...); |
dan_ackme | 29:b6af04b77a56 | 446 | |
dan_ackme | 29:b6af04b77a56 | 447 | /** |
dan_ackme | 29:b6af04b77a56 | 448 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 449 | * |
dan_ackme | 29:b6af04b77a56 | 450 | * - This method uses the library internal buffer and |
dan_ackme | 29:b6af04b77a56 | 451 | * - default timeout. See setCommandDefaultTimeout() |
dan_ackme | 29:b6af04b77a56 | 452 | * |
dan_ackme | 29:b6af04b77a56 | 453 | * @note Refer to @ref send_command_desc for more info |
dan_ackme | 29:b6af04b77a56 | 454 | * |
dan_ackme | 29:b6af04b77a56 | 455 | * @param[in] cmd WiConnect command to send to module |
dan_ackme | 29:b6af04b77a56 | 456 | * @param[in] vaList Varaible list of arguments |
dan_ackme | 29:b6af04b77a56 | 457 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 458 | */ |
dan_ackme | 29:b6af04b77a56 | 459 | WiconnectResult sendCommand(const char *cmd, va_list vaList); |
dan_ackme | 29:b6af04b77a56 | 460 | |
dan_ackme | 29:b6af04b77a56 | 461 | /** |
dan_ackme | 29:b6af04b77a56 | 462 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 463 | * |
dan_ackme | 29:b6af04b77a56 | 464 | * @brief Check the status of the currently executing command. |
dan_ackme | 29:b6af04b77a56 | 465 | * |
dan_ackme | 29:b6af04b77a56 | 466 | * Refer to @ref WiconnectResult for more information about the return code. |
dan_ackme | 29:b6af04b77a56 | 467 | * |
dan_ackme | 29:b6af04b77a56 | 468 | * @note This command is only applicable for non-blocking mode. Refer to @ref setting_blocking_modes. |
dan_ackme | 29:b6af04b77a56 | 469 | * |
dan_ackme | 29:b6af04b77a56 | 470 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 471 | */ |
dan_ackme | 29:b6af04b77a56 | 472 | WiconnectResult checkCurrentCommand(); |
dan_ackme | 29:b6af04b77a56 | 473 | |
dan_ackme | 29:b6af04b77a56 | 474 | /** |
dan_ackme | 29:b6af04b77a56 | 475 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 476 | * |
dan_ackme | 29:b6af04b77a56 | 477 | * @brief Stop the currently executing command. |
dan_ackme | 29:b6af04b77a56 | 478 | * |
dan_ackme | 29:b6af04b77a56 | 479 | * @note This command is only applicable for non-blocking mode. Refer to @ref setting_blocking_modes. |
dan_ackme | 29:b6af04b77a56 | 480 | */ |
dan_ackme | 29:b6af04b77a56 | 481 | void stopCurrentCommand(); |
dan_ackme | 29:b6af04b77a56 | 482 | |
dan_ackme | 29:b6af04b77a56 | 483 | |
dan_ackme | 29:b6af04b77a56 | 484 | // ------------------------------------------------------------------------ |
dan_ackme | 29:b6af04b77a56 | 485 | |
dan_ackme | 29:b6af04b77a56 | 486 | |
dan_ackme | 29:b6af04b77a56 | 487 | /** |
dan_ackme | 29:b6af04b77a56 | 488 | * @ingroup api_core_misc |
dan_ackme | 29:b6af04b77a56 | 489 | * |
dan_ackme | 29:b6af04b77a56 | 490 | * @brief When the WiConnect WiFi module returns a response, it contains a |
dan_ackme | 29:b6af04b77a56 | 491 | * response code in the header. This function converts the previous response code |
dan_ackme | 29:b6af04b77a56 | 492 | * to a readable string. |
dan_ackme | 29:b6af04b77a56 | 493 | * |
dan_ackme | 29:b6af04b77a56 | 494 | * @return string representation of module response code |
dan_ackme | 29:b6af04b77a56 | 495 | */ |
dan_ackme | 29:b6af04b77a56 | 496 | const char* getLastCommandResponseCodeStr(); |
dan_ackme | 29:b6af04b77a56 | 497 | |
dan_ackme | 29:b6af04b77a56 | 498 | /** |
dan_ackme | 29:b6af04b77a56 | 499 | * @ingroup api_core_misc |
dan_ackme | 29:b6af04b77a56 | 500 | * |
dan_ackme | 29:b6af04b77a56 | 501 | * @brief Return the length in bytes of the previous response. |
dan_ackme | 29:b6af04b77a56 | 502 | * |
dan_ackme | 29:b6af04b77a56 | 503 | * @return length of previous response |
dan_ackme | 29:b6af04b77a56 | 504 | */ |
dan_ackme | 29:b6af04b77a56 | 505 | uint16_t getLastCommandResponseLength(); |
dan_ackme | 29:b6af04b77a56 | 506 | |
dan_ackme | 29:b6af04b77a56 | 507 | /** |
dan_ackme | 29:b6af04b77a56 | 508 | * @ingroup api_core_misc |
dan_ackme | 29:b6af04b77a56 | 509 | * |
dan_ackme | 29:b6af04b77a56 | 510 | * @brief Return pointer to internal response buffer. |
dan_ackme | 29:b6af04b77a56 | 511 | * |
dan_ackme | 29:b6af04b77a56 | 512 | * @return pointer to internal response buffer |
dan_ackme | 29:b6af04b77a56 | 513 | */ |
dan_ackme | 29:b6af04b77a56 | 514 | char* getResponseBuffer(); |
dan_ackme | 29:b6af04b77a56 | 515 | |
dan_ackme | 29:b6af04b77a56 | 516 | /** |
dan_ackme | 29:b6af04b77a56 | 517 | * @ingroup api_core_misc |
dan_ackme | 29:b6af04b77a56 | 518 | * |
dan_ackme | 29:b6af04b77a56 | 519 | * @brief Helper method to convert previous response to uint32 |
dan_ackme | 29:b6af04b77a56 | 520 | * |
dan_ackme | 29:b6af04b77a56 | 521 | * @note This uses the internal response buffer. |
dan_ackme | 29:b6af04b77a56 | 522 | * |
dan_ackme | 29:b6af04b77a56 | 523 | * @param[out] uint32Ptr Pointer to hold result of conversion. |
dan_ackme | 29:b6af04b77a56 | 524 | * @return Result of conversion. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 525 | */ |
dan_ackme | 29:b6af04b77a56 | 526 | WiconnectResult responseToUint32(uint32_t *uint32Ptr); |
dan_ackme | 29:b6af04b77a56 | 527 | |
dan_ackme | 29:b6af04b77a56 | 528 | /** |
dan_ackme | 29:b6af04b77a56 | 529 | * @ingroup api_core_misc |
dan_ackme | 29:b6af04b77a56 | 530 | * |
dan_ackme | 29:b6af04b77a56 | 531 | * @brief Helper method to convert previous response to int32 |
dan_ackme | 29:b6af04b77a56 | 532 | * |
dan_ackme | 29:b6af04b77a56 | 533 | * @note This uses the internal response buffer. |
dan_ackme | 29:b6af04b77a56 | 534 | * |
dan_ackme | 29:b6af04b77a56 | 535 | * @param[out] int32Ptr Pointer to hold result of conversion. |
dan_ackme | 29:b6af04b77a56 | 536 | * @return Result of conversion. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 537 | */ |
dan_ackme | 29:b6af04b77a56 | 538 | WiconnectResult responseToInt32(int32_t *int32Ptr); |
dan_ackme | 29:b6af04b77a56 | 539 | |
dan_ackme | 29:b6af04b77a56 | 540 | |
dan_ackme | 29:b6af04b77a56 | 541 | // ------------------------------------------------------------------------ |
dan_ackme | 29:b6af04b77a56 | 542 | |
dan_ackme | 29:b6af04b77a56 | 543 | /** |
dan_ackme | 29:b6af04b77a56 | 544 | * @ingroup api_core_settings |
dan_ackme | 29:b6af04b77a56 | 545 | * |
dan_ackme | 29:b6af04b77a56 | 546 | * @brief Set a module setting |
dan_ackme | 29:b6af04b77a56 | 547 | * |
dan_ackme | 29:b6af04b77a56 | 548 | * Refer to: http://wiconnect.ack.me/2.0/variables |
dan_ackme | 29:b6af04b77a56 | 549 | * for a list of the available settings and descriptions |
dan_ackme | 29:b6af04b77a56 | 550 | * |
dan_ackme | 29:b6af04b77a56 | 551 | * @param settingStr String module setting name. |
dan_ackme | 29:b6af04b77a56 | 552 | * @param value The integer value to set |
dan_ackme | 29:b6af04b77a56 | 553 | * |
dan_ackme | 29:b6af04b77a56 | 554 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 555 | */ |
dan_ackme | 29:b6af04b77a56 | 556 | WiconnectResult setSetting(const char *settingStr, uint32_t value); |
dan_ackme | 29:b6af04b77a56 | 557 | |
dan_ackme | 29:b6af04b77a56 | 558 | /** |
dan_ackme | 29:b6af04b77a56 | 559 | * @ingroup api_core_settings |
dan_ackme | 29:b6af04b77a56 | 560 | * |
dan_ackme | 29:b6af04b77a56 | 561 | * @brief Set a module setting |
dan_ackme | 29:b6af04b77a56 | 562 | * |
dan_ackme | 29:b6af04b77a56 | 563 | * Refer to: http://wiconnect.ack.me/2.0/variables |
dan_ackme | 29:b6af04b77a56 | 564 | * for a list of the available settings and descriptions |
dan_ackme | 29:b6af04b77a56 | 565 | * |
dan_ackme | 29:b6af04b77a56 | 566 | * @param settingStr String module setting name. |
dan_ackme | 29:b6af04b77a56 | 567 | * @param value The string value to set |
dan_ackme | 29:b6af04b77a56 | 568 | * |
dan_ackme | 29:b6af04b77a56 | 569 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 570 | */ |
dan_ackme | 29:b6af04b77a56 | 571 | WiconnectResult setSetting(const char *settingStr, const char *value); |
dan_ackme | 29:b6af04b77a56 | 572 | |
dan_ackme | 29:b6af04b77a56 | 573 | /** |
dan_ackme | 29:b6af04b77a56 | 574 | * @ingroup api_core_settings |
dan_ackme | 29:b6af04b77a56 | 575 | * |
dan_ackme | 29:b6af04b77a56 | 576 | * @brief Get a module setting |
dan_ackme | 29:b6af04b77a56 | 577 | * |
dan_ackme | 29:b6af04b77a56 | 578 | * Refer to: http://wiconnect.ack.me/2.0/variables |
dan_ackme | 29:b6af04b77a56 | 579 | * for a list of the available settings and descriptions |
dan_ackme | 29:b6af04b77a56 | 580 | * |
dan_ackme | 29:b6af04b77a56 | 581 | * @param settingStr String module setting name. |
dan_ackme | 29:b6af04b77a56 | 582 | * @param valuePtr Pointer to buffer to contain integer value |
dan_ackme | 29:b6af04b77a56 | 583 | * |
dan_ackme | 29:b6af04b77a56 | 584 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 585 | */ |
dan_ackme | 29:b6af04b77a56 | 586 | WiconnectResult getSetting(const char *settingStr, uint32_t *valuePtr); |
dan_ackme | 29:b6af04b77a56 | 587 | |
dan_ackme | 29:b6af04b77a56 | 588 | /** |
dan_ackme | 29:b6af04b77a56 | 589 | * @ingroup api_core_settings |
dan_ackme | 29:b6af04b77a56 | 590 | * |
dan_ackme | 29:b6af04b77a56 | 591 | * @brief Get a module setting |
dan_ackme | 29:b6af04b77a56 | 592 | * |
dan_ackme | 29:b6af04b77a56 | 593 | * Refer to: http://wiconnect.ack.me/2.0/variables |
dan_ackme | 29:b6af04b77a56 | 594 | * for a list of the available settings and descriptions |
dan_ackme | 29:b6af04b77a56 | 595 | * |
dan_ackme | 29:b6af04b77a56 | 596 | * @param settingStr String module setting name. |
dan_ackme | 29:b6af04b77a56 | 597 | * @param valuePtr Pointer to hold pointer to internal API buffer containing retrieved setting result |
dan_ackme | 29:b6af04b77a56 | 598 | * |
dan_ackme | 29:b6af04b77a56 | 599 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 600 | */ |
dan_ackme | 29:b6af04b77a56 | 601 | WiconnectResult getSetting(const char *settingStr, char **valuePtr); |
dan_ackme | 29:b6af04b77a56 | 602 | |
dan_ackme | 29:b6af04b77a56 | 603 | /** |
dan_ackme | 29:b6af04b77a56 | 604 | * @ingroup api_core_settings |
dan_ackme | 29:b6af04b77a56 | 605 | * |
dan_ackme | 29:b6af04b77a56 | 606 | * @brief Get a module setting |
dan_ackme | 29:b6af04b77a56 | 607 | * |
dan_ackme | 29:b6af04b77a56 | 608 | * Refer to: http://wiconnect.ack.me/2.0/variables |
dan_ackme | 29:b6af04b77a56 | 609 | * for a list of the available settings and descriptions |
dan_ackme | 29:b6af04b77a56 | 610 | * |
dan_ackme | 29:b6af04b77a56 | 611 | * @param settingStr String module setting name. |
dan_ackme | 29:b6af04b77a56 | 612 | * @param valueBuffer Buffer to hold retrieved setting result |
dan_ackme | 29:b6af04b77a56 | 613 | * @param valueBufferLen The length of the input buffer |
dan_ackme | 29:b6af04b77a56 | 614 | * |
dan_ackme | 29:b6af04b77a56 | 615 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 616 | */ |
dan_ackme | 29:b6af04b77a56 | 617 | WiconnectResult getSetting(const char *settingStr, char *valueBuffer, uint16_t valueBufferLen); |
dan_ackme | 29:b6af04b77a56 | 618 | |
dan_ackme | 29:b6af04b77a56 | 619 | |
dan_ackme | 29:b6af04b77a56 | 620 | /** |
dan_ackme | 29:b6af04b77a56 | 621 | * @ingroup api_core_settings |
dan_ackme | 29:b6af04b77a56 | 622 | * |
dan_ackme | 29:b6af04b77a56 | 623 | * @brief Sets if API calls are blocking or non-blocking. |
dan_ackme | 29:b6af04b77a56 | 624 | * |
dan_ackme | 29:b6af04b77a56 | 625 | * @param[in] blockingEnabled The new blocking value |
dan_ackme | 29:b6af04b77a56 | 626 | */ |
dan_ackme | 29:b6af04b77a56 | 627 | void setBlockingEnabled(bool blockingEnabled); |
dan_ackme | 29:b6af04b77a56 | 628 | |
dan_ackme | 29:b6af04b77a56 | 629 | /** |
dan_ackme | 29:b6af04b77a56 | 630 | * @ingroup api_core_settings |
dan_ackme | 29:b6af04b77a56 | 631 | * |
dan_ackme | 29:b6af04b77a56 | 632 | * @brief Gets if API calls are blocking or non-blocking. |
dan_ackme | 29:b6af04b77a56 | 633 | */ |
dan_ackme | 29:b6af04b77a56 | 634 | bool getBlockingEnabled(void); |
dan_ackme | 29:b6af04b77a56 | 635 | |
dan_ackme | 29:b6af04b77a56 | 636 | /** |
dan_ackme | 29:b6af04b77a56 | 637 | * @ingroup api_core_settings |
dan_ackme | 29:b6af04b77a56 | 638 | * |
dan_ackme | 29:b6af04b77a56 | 639 | * @brief Sets the default maximum time an API method may execute before |
dan_ackme | 29:b6af04b77a56 | 640 | * terminating and return a timeout error code. |
dan_ackme | 29:b6af04b77a56 | 641 | * |
dan_ackme | 29:b6af04b77a56 | 642 | * @note All API methods (execpt some sendCommand()) use this default value. |
dan_ackme | 29:b6af04b77a56 | 643 | * |
dan_ackme | 29:b6af04b77a56 | 644 | * @param[in] timeoutMs Default command timeout in milliseconds |
dan_ackme | 29:b6af04b77a56 | 645 | */ |
dan_ackme | 29:b6af04b77a56 | 646 | void setCommandDefaultTimeout(TimerTimeout timeoutMs); |
dan_ackme | 29:b6af04b77a56 | 647 | |
dan_ackme | 29:b6af04b77a56 | 648 | /** |
dan_ackme | 29:b6af04b77a56 | 649 | * @ingroup api_core_settings |
dan_ackme | 29:b6af04b77a56 | 650 | * |
dan_ackme | 29:b6af04b77a56 | 651 | * @brief Returns the current default maximum API execution time. |
dan_ackme | 29:b6af04b77a56 | 652 | * |
dan_ackme | 29:b6af04b77a56 | 653 | * @return Default command timeout in milliseconds |
dan_ackme | 29:b6af04b77a56 | 654 | */ |
dan_ackme | 29:b6af04b77a56 | 655 | TimerTimeout getCommandDefaultTimeout(); |
dan_ackme | 29:b6af04b77a56 | 656 | |
dan_ackme | 29:b6af04b77a56 | 657 | /** |
dan_ackme | 29:b6af04b77a56 | 658 | * @ingroup api_core_settings |
dan_ackme | 29:b6af04b77a56 | 659 | * |
dan_ackme | 29:b6af04b77a56 | 660 | * @brief Sets a mapping function used to convert from a host Pin to WiConnect WiFi module GPIO. |
dan_ackme | 29:b6af04b77a56 | 661 | * |
dan_ackme | 29:b6af04b77a56 | 662 | * @param[in] mapper Pin to GPIO mapper function pointer |
dan_ackme | 29:b6af04b77a56 | 663 | */ |
dan_ackme | 29:b6af04b77a56 | 664 | void setPinToGpioMapper(PinToGpioMapper mapper); |
dan_ackme | 29:b6af04b77a56 | 665 | |
dan_ackme | 29:b6af04b77a56 | 666 | /** |
dan_ackme | 29:b6af04b77a56 | 667 | * @ingroup api_core_settings |
dan_ackme | 29:b6af04b77a56 | 668 | * |
dan_ackme | 29:b6af04b77a56 | 669 | * @brief Sets callback function used to debug WiConnect WiFi module RX/TX serial data. |
dan_ackme | 29:b6af04b77a56 | 670 | * |
dan_ackme | 29:b6af04b77a56 | 671 | * @param[in] logFunc Logging function pointer |
dan_ackme | 29:b6af04b77a56 | 672 | */ |
dan_ackme | 29:b6af04b77a56 | 673 | void setDebugLogger(LogFunc logFunc); |
dan_ackme | 29:b6af04b77a56 | 674 | |
dan_ackme | 29:b6af04b77a56 | 675 | /** |
dan_ackme | 29:b6af04b77a56 | 676 | * @ingroup api_core_settings |
dan_ackme | 29:b6af04b77a56 | 677 | * |
dan_ackme | 29:b6af04b77a56 | 678 | * @brief Sets callback used when Wiconnect Library hits and internal assertion. |
dan_ackme | 29:b6af04b77a56 | 679 | * |
dan_ackme | 29:b6af04b77a56 | 680 | * @note This is mainly for debugging. There's nothing the callback can do to fix the assertion. |
dan_ackme | 29:b6af04b77a56 | 681 | * |
dan_ackme | 29:b6af04b77a56 | 682 | * @param[in] assertLogFunc Logging function pointer |
dan_ackme | 29:b6af04b77a56 | 683 | */ |
dan_ackme | 29:b6af04b77a56 | 684 | void setAssertLogger(LogFunc assertLogFunc); |
dan_ackme | 29:b6af04b77a56 | 685 | |
dan_ackme | 29:b6af04b77a56 | 686 | // ------------------------------------------------------------------------ |
dan_ackme | 29:b6af04b77a56 | 687 | |
dan_ackme | 29:b6af04b77a56 | 688 | |
dan_ackme | 29:b6af04b77a56 | 689 | #ifdef WICONNECT_ASYNC_TIMER_ENABLED |
dan_ackme | 29:b6af04b77a56 | 690 | /** |
dan_ackme | 29:b6af04b77a56 | 691 | * @ingroup api_core_send_command |
dan_ackme | 29:b6af04b77a56 | 692 | * |
dan_ackme | 29:b6af04b77a56 | 693 | * @brief Add user command to be executed asynchronously. |
dan_ackme | 29:b6af04b77a56 | 694 | * |
dan_ackme | 29:b6af04b77a56 | 695 | * Refer to @ref setting_async_processing for more info. |
dan_ackme | 29:b6af04b77a56 | 696 | * |
dan_ackme | 29:b6af04b77a56 | 697 | * @param[in] command Pointer to QueuedCommand to be executed asynchronously |
dan_ackme | 29:b6af04b77a56 | 698 | * @param[in] commandCompleteHandler Callback to be executed when processing is complete. |
dan_ackme | 29:b6af04b77a56 | 699 | * @return Result of method. See @ref WiconnectResult |
dan_ackme | 29:b6af04b77a56 | 700 | */ |
dan_ackme | 29:b6af04b77a56 | 701 | WiconnectResult enqueueCommand(QueuedCommand *command, const Callback &commandCompleteHandler = Callback()); |
dan_ackme | 29:b6af04b77a56 | 702 | |
dan_ackme | 29:b6af04b77a56 | 703 | /** |
dan_ackme | 29:b6af04b77a56 | 704 | * @ingroup api_core_settings |
dan_ackme | 29:b6af04b77a56 | 705 | * |
dan_ackme | 29:b6af04b77a56 | 706 | * @brief Set the period at which an asynchronous command should be processed. |
dan_ackme | 29:b6af04b77a56 | 707 | * |
dan_ackme | 29:b6af04b77a56 | 708 | * Refer to @ref setting_async_processing for more info. |
dan_ackme | 29:b6af04b77a56 | 709 | * |
dan_ackme | 29:b6af04b77a56 | 710 | * @param[in] periodMs Processing period in milliseconds |
dan_ackme | 29:b6af04b77a56 | 711 | */ |
dan_ackme | 29:b6af04b77a56 | 712 | void setCommandProcessingPeriod(uint32_t periodMs); |
dan_ackme | 29:b6af04b77a56 | 713 | #endif |
dan_ackme | 29:b6af04b77a56 | 714 | |
dan_ackme | 29:b6af04b77a56 | 715 | |
dan_ackme | 29:b6af04b77a56 | 716 | /** |
dan_ackme | 29:b6af04b77a56 | 717 | * @ingroup conversion_util |
dan_ackme | 29:b6af04b77a56 | 718 | * |
dan_ackme | 29:b6af04b77a56 | 719 | * @brief Converts a @ref WiconnectResult to string representation. |
dan_ackme | 29:b6af04b77a56 | 720 | * |
dan_ackme | 29:b6af04b77a56 | 721 | * @param[in] wiconnectResult Result code |
dan_ackme | 29:b6af04b77a56 | 722 | * @return String representaion of result code |
dan_ackme | 29:b6af04b77a56 | 723 | */ |
dan_ackme | 29:b6af04b77a56 | 724 | static const char* getWiconnectResultStr(WiconnectResult wiconnectResult); |
dan_ackme | 29:b6af04b77a56 | 725 | |
dan_ackme | 34:2616445d0823 | 726 | /** |
dan_ackme | 34:2616445d0823 | 727 | * @ingroup conversion_util |
dan_ackme | 34:2616445d0823 | 728 | * |
dan_ackme | 34:2616445d0823 | 729 | * @brief Converts wiconnect version string to uint32_t representation. |
dan_ackme | 34:2616445d0823 | 730 | * |
dan_ackme | 34:2616445d0823 | 731 | * @param[in] Output of @ref getVersion() API call. |
dan_ackme | 34:2616445d0823 | 732 | * @return 32bit integer WiConnect firmware version |
dan_ackme | 34:2616445d0823 | 733 | */ |
dan_ackme | 34:2616445d0823 | 734 | static uint32_t wiconnectVersionToInt(char *versionStr); |
dan_ackme | 34:2616445d0823 | 735 | |
dan_ackme | 29:b6af04b77a56 | 736 | protected: |
dan_ackme | 29:b6af04b77a56 | 737 | |
dan_ackme | 29:b6af04b77a56 | 738 | #ifdef WICONNECT_ENABLE_MALLOC |
dan_ackme | 29:b6af04b77a56 | 739 | void* (*_malloc)(size_t); |
dan_ackme | 29:b6af04b77a56 | 740 | void (*_free)(void *); |
dan_ackme | 29:b6af04b77a56 | 741 | friend class QueuedCommand; |
dan_ackme | 29:b6af04b77a56 | 742 | friend class WiconnectSerial; |
dan_ackme | 29:b6af04b77a56 | 743 | friend class ScanResult; |
dan_ackme | 29:b6af04b77a56 | 744 | #endif |
dan_ackme | 29:b6af04b77a56 | 745 | |
dan_ackme | 29:b6af04b77a56 | 746 | wiconnect::WiconnectSerial serial; |
dan_ackme | 29:b6af04b77a56 | 747 | wiconnect::Gpio resetGpio; |
dan_ackme | 29:b6af04b77a56 | 748 | wiconnect::Gpio wakeGpio; |
dan_ackme | 29:b6af04b77a56 | 749 | |
dan_ackme | 29:b6af04b77a56 | 750 | volatile bool commandExecuting; |
dan_ackme | 29:b6af04b77a56 | 751 | bool initialized; |
dan_ackme | 34:2616445d0823 | 752 | bool needUpdate; |
dan_ackme | 29:b6af04b77a56 | 753 | bool nonBlocking; |
dan_ackme | 29:b6af04b77a56 | 754 | |
dan_ackme | 29:b6af04b77a56 | 755 | PinToGpioMapper pinToGpioMapper; |
dan_ackme | 29:b6af04b77a56 | 756 | |
dan_ackme | 29:b6af04b77a56 | 757 | char *internalBuffer; |
dan_ackme | 29:b6af04b77a56 | 758 | int internalBufferSize; |
dan_ackme | 29:b6af04b77a56 | 759 | bool internalBufferAlloc; |
dan_ackme | 29:b6af04b77a56 | 760 | uint8_t internalProcessingState; |
dan_ackme | 29:b6af04b77a56 | 761 | void *currentCommandId; |
dan_ackme | 29:b6af04b77a56 | 762 | |
dan_ackme | 29:b6af04b77a56 | 763 | wiconnect::TimeoutTimer timeoutTimer; |
dan_ackme | 29:b6af04b77a56 | 764 | TimerTimeout defaultTimeoutMs; |
dan_ackme | 29:b6af04b77a56 | 765 | |
dan_ackme | 29:b6af04b77a56 | 766 | uint8_t commandHeaderBuffer[32]; |
dan_ackme | 29:b6af04b77a56 | 767 | char commandFormatBuffer[WICONNECT_MAX_CMD_SIZE]; |
dan_ackme | 29:b6af04b77a56 | 768 | uint8_t commandContext[96]; |
dan_ackme | 29:b6af04b77a56 | 769 | |
dan_ackme | 29:b6af04b77a56 | 770 | void prepare(void *internalBuffer, int internalBufferSize, bool nonBlocking); |
dan_ackme | 29:b6af04b77a56 | 771 | bool configureModuleDataBus(void); |
dan_ackme | 29:b6af04b77a56 | 772 | WiconnectResult inline receiveResponse(); |
dan_ackme | 29:b6af04b77a56 | 773 | WiconnectResult inline receivePacket(); |
dan_ackme | 29:b6af04b77a56 | 774 | void issueCommandCallback(WiconnectResult result); |
dan_ackme | 29:b6af04b77a56 | 775 | |
dan_ackme | 29:b6af04b77a56 | 776 | #ifdef WICONNECT_ENABLE_DEBUGGING |
dan_ackme | 29:b6af04b77a56 | 777 | LogFunc debugLogger; |
dan_ackme | 29:b6af04b77a56 | 778 | #endif |
dan_ackme | 29:b6af04b77a56 | 779 | LogFunc assertLogger; |
dan_ackme | 29:b6af04b77a56 | 780 | |
dan_ackme | 29:b6af04b77a56 | 781 | void debugLog(const char *msg, ...); |
dan_ackme | 29:b6af04b77a56 | 782 | |
dan_ackme | 29:b6af04b77a56 | 783 | #ifdef WICONNECT_ASYNC_TIMER_ENABLED |
dan_ackme | 29:b6af04b77a56 | 784 | wiconnect::PeriodicTimer commandProcessorTimer; |
dan_ackme | 29:b6af04b77a56 | 785 | uint32_t commandProcessingPeriod; |
dan_ackme | 29:b6af04b77a56 | 786 | CommandQueue commandQueue; |
dan_ackme | 29:b6af04b77a56 | 787 | wiconnect::QueuedCommand *currentQueuedCommand; |
dan_ackme | 29:b6af04b77a56 | 788 | |
dan_ackme | 29:b6af04b77a56 | 789 | void commandProcessingTimerHandler(void); |
dan_ackme | 29:b6af04b77a56 | 790 | void processNextQueuedCommand(); |
dan_ackme | 29:b6af04b77a56 | 791 | void checkQueuedCommandTimeout(); |
dan_ackme | 29:b6af04b77a56 | 792 | #endif |
dan_ackme | 29:b6af04b77a56 | 793 | |
dan_ackme | 29:b6af04b77a56 | 794 | friend class NetworkInterface; |
dan_ackme | 29:b6af04b77a56 | 795 | friend class SocketInterface; |
dan_ackme | 29:b6af04b77a56 | 796 | friend class FileInterface; |
dan_ackme | 29:b6af04b77a56 | 797 | friend class GhmInterface; |
dan_ackme | 29:b6af04b77a56 | 798 | friend class GhmMessageList; |
dan_ackme | 29:b6af04b77a56 | 799 | friend class GhmMessage; |
dan_ackme | 29:b6af04b77a56 | 800 | friend class ScanResultList; |
dan_ackme | 29:b6af04b77a56 | 801 | friend class WiconnectFile; |
dan_ackme | 29:b6af04b77a56 | 802 | friend class WiconnectSocket; |
dan_ackme | 29:b6af04b77a56 | 803 | friend class WiconnectUdpServer; |
dan_ackme | 29:b6af04b77a56 | 804 | }; |
dan_ackme | 29:b6af04b77a56 | 805 | |
dan_ackme | 29:b6af04b77a56 | 806 | } |
dan_ackme | 29:b6af04b77a56 | 807 | |
dan_ackme | 29:b6af04b77a56 | 808 | |
dan_ackme | 29:b6af04b77a56 | 809 | #include "sdkTypes.h" |
dan_ackme | 29:b6af04b77a56 | 810 |