Revision 0:21fd70d57ac7, committed 2019-09-13

Comitter:

Antulius

Date:

Fri Sep 13 18:38:44 2019 +0000

Commit message:

STM32F103C8_Hola_Mundo Programa actualizado para utilizar secuencias de ESCape

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/PinNames.h	Fri Sep 13 18:38:44 2019 +0000
@@ -0,0 +1,201 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ 
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+#include "PinNamesTypes.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+//UART to AMB8826
+#define TXD1      PA_9
+#define RXD1      PA_10
+#define CTS1      PA_11
+int baudRate = 115200;
+
+//UART to Silicon Labs CP210x
+#define TXD2      PA_2
+#define RXD2      PA_3
+
+//UART to FTDI
+#define TXD3      PB_10
+#define RXD3      PB_11
+
+//I2C
+#define I2C1_SCL  PB_6
+#define I2C1_SDA  PB_7
+
+#define I2C2_SCL  PB_10
+#define I2C2_SDA  PB_11
+
+//SPI
+#define SPI1_MOSI PA_7
+#define SPI1_MISO PA_6
+#define SPI1_SCLK PA_5
+#define SPI1_NSS1 PA_4
+#define SDsel     PA_4
+
+#define SPI2_MOSI PB_15
+#define SPI2_MISO PB_14
+#define SPI2_SCLK PB_13
+#define SPI2_NSS2 PB_12
+
+//CAN
+#define CAN1_RX   PA_11
+#define CAN1_TX   PA_12
+
+//USB   CDC
+#define USB_POS   PA_12
+#define USB_NEG   PA_11
+
+//ADC
+#define Uin       PA_1
+#define Ubatt     PA_0
+
+typedef enum {
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+
+    // Ports
+    PA_0  = 0x00,
+    PA_1  = 0x01,
+    PA_2  = 0x02,
+    PA_3  = 0x03,
+    PA_4  = 0x04,
+    PA_5  = 0x05,
+    PA_6  = 0x06,
+    PA_7  = 0x07,
+    PA_8  = 0x08,
+    PA_9  = 0x09,
+    PA_10 = 0x0A,
+    PA_11 = 0x0B,
+    PA_12 = 0x0C,
+    PA_13 = NC,
+    PA_14 = NC,
+    PA_15 = 0x0F,
+
+    PB_0  = 0x10,
+    PB_1  = 0x11,
+    PB_2  = NC,
+    PB_3  = 0x13,
+    PB_4  = 0x14,
+    PB_5  = 0x15,
+    PB_6  = 0x16,
+    PB_7  = 0x17,
+    PB_8  = 0x18,
+    PB_9  = 0x19,
+    PB_10 = 0x1A,
+    PB_11 = 0x1B,
+    PB_12 = 0x1C,
+    PB_13 = 0x1D,
+    PB_14 = 0x1E,
+    PB_15 = 0x1F,
+
+    PC_0  = NC,
+    PC_1  = NC,
+    PC_2  = NC,
+    PC_3  = NC,
+    PC_4  = NC,
+    PC_5  = NC,
+    PC_6  = NC,
+    PC_7  = NC,
+    PC_8  = NC,
+    PC_9  = NC,
+    PC_10 = NC,
+    PC_11 = NC,
+    PC_12 = NC,
+    PC_13 = 0x2D,
+    PC_14 = 0x2E,
+    PC_15 = 0x2F,
+
+    PD_2  = NC,
+
+    // ADC internal channels
+    ADC_TEMP = 0xF0,
+    ADC_VREF = 0xF1,
+
+    // Arduino connector namings
+    A0          = PA_0,
+    A1          = PA_1,
+    A2          = PA_4,
+    A3          = PB_0,
+    A4          = NC,
+    A5          = NC,
+    D0          = PA_3,
+    D1          = PA_2,
+    D2          = PA_10,
+    D3          = PB_3,
+    D4          = PB_5,
+    D5          = PB_4,
+    D6          = PB_10,
+    D7          = PA_8,
+    D8          = PA_9,
+    D9          = NC,
+    D10         = PB_6,
+    D11         = PA_7,
+    D12         = PA_6,
+    D13         = PA_5,
+    D14         = PB_9,
+    D15         = PB_8,
+
+    // Generic signals namings
+    Red_Led     = NC,
+    Green_Led   = PC_13,
+    Blue_Led    = NC,
+    LED1        = PC_13,
+    LED2        = NC,
+    LED3        = NC,
+    LED4        = NC,
+    USER_BUTTON = NC,    
+    SERIAL_TX   = PA_2,
+    SERIAL_RX   = PA_3,
+    USBTX       = PA_12,
+    USBRX       = PA_11,
+    CANRX       = PB_8,    
+    CANTX       = PB_9,
+    I2C_SCL     = PB_6,
+    I2C_SDA     = PB_7,
+    SPI_MOSI    = PA_7,
+    SPI_MISO    = PA_6,
+    SPI_SCK     = PA_5,
+    SPI_CS      = PA_4,
+    TRACE_SWO   = PB_3,
+    SWO         = PB_3
+} PinName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SysClockConf.cpp	Fri Sep 13 18:38:44 2019 +0000
@@ -0,0 +1,56 @@
+/*
+  ******************************************************************************
+  * @file    SysClockConf.c
+  * @version 
+  * @date    05-July-2016
+  * @brief   System Clock configuration for STM32F103C8T6
+  *****************************************************************************
+  *
+  * All rights reserved.
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
+
+#include "SysClockConf.h"
+#include "mbed.h"
+
+void HSE_SystemClock_Config(void) {
+    RCC_OscInitTypeDef        RCC_OscInitStruct;
+    RCC_ClkInitTypeDef        RCC_ClkInitStruct;
+    RCC_PeriphCLKInitTypeDef  PeriphClkInit;
+
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+    RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+    RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
+    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+    RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+    RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
+    HAL_RCC_OscConfig(&RCC_OscInitStruct);
+    RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+    RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+    RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+    HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2);
+    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC|RCC_PERIPHCLK_USB;
+    PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
+    PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
+    HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
+}
+
+void confSysClock(void) {
+    HAL_RCC_DeInit();
+    HSE_SystemClock_Config();
+    SystemCoreClockUpdate();
+}
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SysClockConf.h	Fri Sep 13 18:38:44 2019 +0000
@@ -0,0 +1,2 @@
+#pragma once
+void confSysClock(void);
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri Sep 13 18:38:44 2019 +0000
@@ -0,0 +1,185 @@
+/* ###########################################################################
+**    Archivo        : main.c
+**    Proyecto       : STM32-103C8_Hola_Mundo
+**    Procesador     : STM32F103C8
+**    Herramienta    : Mbed
+**    Version        : Driver 01.01
+**    Compilador     : GNU C Compiler
+**    Fecha/Hora     : 14-07-2015, 11:48, # CodeGen: 0
+**    Descripción    :
+**         Este proyecto muestra la configuración y uso de la Terminal Serial
+**         This module contains user's application code.
+**   Componentes     : Serial, etc .
+**   Configuraciones : Se puede seleccionar entre diferentes velocidades de 
+**                     transmisión
+**   Autores         :
+**         ATEAM Development Group:
+**          - Antulio Morgado Valle
+**
+**   Versión        : Beta
+**   Revisión       : A
+**   Release        : 0
+**   Bugs & Fixes   :
+**   Date           : 20/10/2019
+**                    Ejemplpo del Hola Mundo
+**                    27/09/2010 
+**                    
+**
+** ###########################################################################*/
+/*
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+:  Includes
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+*/
+#include "stm32f103c8t6.h"
+#include "mbed.h"
+#include "Serial.h"
+#include "stdio.h"
+/*
+:...............................................................................
+:  Definiciones
+:...............................................................................
+*/
+#define on              0               // Estado para boton presionado
+#define off             1               // Estado para boton sin presionar
+#define hold            2               // Estado para boton mantenido
+#define release         3               // Estado para boton liberado
+#define FALSE           0               // Estado FALSO
+#define TRUE            1               // Estado VERDADERO
+
+/*
++-------------------------------------------------------------------------------
+|  Configuración de Puertos 
++-------------------------------------------------------------------------------
+*/
+
+// *****    Host PC Terminal Communication channels
+Serial      terminal (PA_2, PA_3);          // Inicializa la comunicación serial a la PC (Tx,Rx)
+//Serial      terminal(USBTX, USBRX,115200);// Tx, Rx  Baud Rate - Terminal Serial por USB @ 115,200 Bauds
+
+/*
++-------------------------------------------------------------------------------
+|  Variables Globales de Usuario 
++-------------------------------------------------------------------------------
+*/
+uint32_t Baud_Rate = 115200;          // Velocidad de Transmisión (Bauds)
+
+/*
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+|  Definición de Funciones Prototipo y Rutinas de los Vectores de Interrupción
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+*/
+void Setup(void);   // Función que inicializa la Tarjeta
+/* END definitions */ 
+
+/*
+#===============================================================================
+|
+|               P R O G R A M A     P R I N C I P A L
+|
+#=============================================================================== 
+*/
+int main()          
+{                   // Inicialización de variables, puertos e interrupciones
+ confSysClock();     // Configure system clock (72MHz HSE clock, 48MHz USB clock)
+ Setup(); 
+ terminal.printf ("ESCUELA SUPERIOR DE INGENIERIA MECANICA Y ELECTRICA\n\r");
+ printf ("\vHola Mundo!\r");
+ printf ("\n\nPresiona cualquier tecla para continuar...");    
+ char opcion = terminal.getc();
+    
+ while (TRUE)                // El Lazo del Programa principal está aquí !!!
+ {
+    printf("\n\r\v\tHola ESIME - IPN!!!\n\r\v");
+    printf ("\033[1;31mEste es un texto rojo.\n\r\033[0m"); 
+    printf ("\033[1;32mEste es un texto verde.\n\r\033[0m");
+    printf ("\033[1;34mEste es un texto azul.\n\r\033[0m");     
+    printf ("\v\tHecho en \033[1;32mMe\033[0mxi\033[1;31mco.\n\r\v\v\033[0m");
+    printf ("\n\r Pulse cualquier tecla para continuar!\r");   
+    opcion = terminal.getc();
+    terminal.putc(opcion);
+    terminal.printf("\n\a\f");
+ }
+}
+/* END main */
+
+/*
+................................................................................
+:  Rutinas de los Vectores de Interrupción
+................................................................................
+*/
+ 
+/* END Events */ 
+/*
+________________________________________________________________________________
+|
+|  Funciones Prototipo
+|_______________________________________________________________________________
+*/
+                // Las Funciones Prototipo van aquí !
+void Setup()
+{
+  terminal.baud(Baud_Rate);         // Se configura la velocidad de transmisión e inicia la comunicación serial.
+  terminal.printf("System is Wake Up!.\n\r"); 
+}                
+
+/* END routines */ 
+ 
+/* END program */                
+
+/*+-----------------------------------------------------------------------------  
+*+ La documentación va aquí!:
++-------------------------------------------------------------------------------
+|                SECUENCIAS DE ESCAPE PARA LA TERMINAL SERIAL
+|
+| SECUENCIA         VALOR                       DESCRIPCIÓN
+|
+|   \n              Nueva línea (new line). El cursor pasa a la primera posición
+|                                           de la línea siguiente 
+|   \r              Retorno de carro (carriage return). El cursor pasa a la 
+|                                           primera posición de la línea donde 
+|                                           nos encontremos.
+|   \t              Tabulador (tab). El cursor pasa a la siguiente posición de 
+|                                           tabulación.
+|   \a              Alerta (bell). Crea un aviso bien de forma visible o bien 
+|                                           mediante sonido.
+|   \b              Espacio atrás (backspace). Hace retroceder el cursor una 
+|                                           posición a la izquierda.
+|   \f              Alimentación de página (form feed). Crea una nueva página.
+|   \v              Tabulación vertical (vertical tab).
+|   \0              Caracter Nulo (null).
+|   \'              Apóstrofo o comilla simple.
+|   \”              Muestra la comilla doble.
+|   \?              Muestra un interrogante.
+|   \\              Muestra la barra invertida.
+|   \número_octal   Muestra el carácter ASCII correspondiente según el número 
+|                                           octal que se haya especificado.
+|   \xnúmero_hexadecimal    Muestra el carácter ASCII correspondiente según el 
+|                                           número hexadecimal que se haya 
+|                                           especificado.
+|   \unnnn          Muestra Caracter en código unicode.
+|   \unnnnnnnn      Muestra varios caracteres en código unicode.
+|
+|   Tambien consultar:
+| https://www.enmimaquinafunciona.com/pregunta/170760/secuencias-de-escape-terminales-en-la-pantalla-gnu
++--------------------------------------------------------------------------------
+|
+|                               EXAMEN
+|
+| 1.-   Utilizando printf y las secuencias de escape, crear una Carátula de 
+|       prentación con los datos personales y escolares. 
+|
++--------------------------------------------------------------------------------
+|
+|                     T H E     A N T U L I U S   T E A M
+|  Research, Development, Systems Equipment, Support & Spare Parts    I n c.
+|                (C) Copyright 1989-2014, All rigths Reserved
+|
+| This program is licensed under rules of
+| THE BEANERS TECHNOLOGIES PROYECT
++-------------------------------------------------------------------------------
+*/
+
+/* END documentation */ 
+
+/* END Mbed */
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Fri Sep 13 18:38:44 2019 +0000
@@ -0,0 +1,1 @@
+https://os.mbed.com/users/mbed_official/code/mbed/builds/65be27845400
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32f103c8t6.h	Fri Sep 13 18:38:44 2019 +0000
@@ -0,0 +1,4 @@
+#pragma once
+#include "PinNames.h"
+#include "SysClockConf.h"
+