Diff: PinNames.h

Revision:

0:21fd70d57ac7

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/PinNames.h	Fri Sep 13 18:38:44 2019 +0000
@@ -0,0 +1,201 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ 
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+#include "PinNamesTypes.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+//UART to AMB8826
+#define TXD1      PA_9
+#define RXD1      PA_10
+#define CTS1      PA_11
+int baudRate = 115200;
+
+//UART to Silicon Labs CP210x
+#define TXD2      PA_2
+#define RXD2      PA_3
+
+//UART to FTDI
+#define TXD3      PB_10
+#define RXD3      PB_11
+
+//I2C
+#define I2C1_SCL  PB_6
+#define I2C1_SDA  PB_7
+
+#define I2C2_SCL  PB_10
+#define I2C2_SDA  PB_11
+
+//SPI
+#define SPI1_MOSI PA_7
+#define SPI1_MISO PA_6
+#define SPI1_SCLK PA_5
+#define SPI1_NSS1 PA_4
+#define SDsel     PA_4
+
+#define SPI2_MOSI PB_15
+#define SPI2_MISO PB_14
+#define SPI2_SCLK PB_13
+#define SPI2_NSS2 PB_12
+
+//CAN
+#define CAN1_RX   PA_11
+#define CAN1_TX   PA_12
+
+//USB   CDC
+#define USB_POS   PA_12
+#define USB_NEG   PA_11
+
+//ADC
+#define Uin       PA_1
+#define Ubatt     PA_0
+
+typedef enum {
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+
+    // Ports
+    PA_0  = 0x00,
+    PA_1  = 0x01,
+    PA_2  = 0x02,
+    PA_3  = 0x03,
+    PA_4  = 0x04,
+    PA_5  = 0x05,
+    PA_6  = 0x06,
+    PA_7  = 0x07,
+    PA_8  = 0x08,
+    PA_9  = 0x09,
+    PA_10 = 0x0A,
+    PA_11 = 0x0B,
+    PA_12 = 0x0C,
+    PA_13 = NC,
+    PA_14 = NC,
+    PA_15 = 0x0F,
+
+    PB_0  = 0x10,
+    PB_1  = 0x11,
+    PB_2  = NC,
+    PB_3  = 0x13,
+    PB_4  = 0x14,
+    PB_5  = 0x15,
+    PB_6  = 0x16,
+    PB_7  = 0x17,
+    PB_8  = 0x18,
+    PB_9  = 0x19,
+    PB_10 = 0x1A,
+    PB_11 = 0x1B,
+    PB_12 = 0x1C,
+    PB_13 = 0x1D,
+    PB_14 = 0x1E,
+    PB_15 = 0x1F,
+
+    PC_0  = NC,
+    PC_1  = NC,
+    PC_2  = NC,
+    PC_3  = NC,
+    PC_4  = NC,
+    PC_5  = NC,
+    PC_6  = NC,
+    PC_7  = NC,
+    PC_8  = NC,
+    PC_9  = NC,
+    PC_10 = NC,
+    PC_11 = NC,
+    PC_12 = NC,
+    PC_13 = 0x2D,
+    PC_14 = 0x2E,
+    PC_15 = 0x2F,
+
+    PD_2  = NC,
+
+    // ADC internal channels
+    ADC_TEMP = 0xF0,
+    ADC_VREF = 0xF1,
+
+    // Arduino connector namings
+    A0          = PA_0,
+    A1          = PA_1,
+    A2          = PA_4,
+    A3          = PB_0,
+    A4          = NC,
+    A5          = NC,
+    D0          = PA_3,
+    D1          = PA_2,
+    D2          = PA_10,
+    D3          = PB_3,
+    D4          = PB_5,
+    D5          = PB_4,
+    D6          = PB_10,
+    D7          = PA_8,
+    D8          = PA_9,
+    D9          = NC,
+    D10         = PB_6,
+    D11         = PA_7,
+    D12         = PA_6,
+    D13         = PA_5,
+    D14         = PB_9,
+    D15         = PB_8,
+
+    // Generic signals namings
+    Red_Led     = NC,
+    Green_Led   = PC_13,
+    Blue_Led    = NC,
+    LED1        = PC_13,
+    LED2        = NC,
+    LED3        = NC,
+    LED4        = NC,
+    USER_BUTTON = NC,    
+    SERIAL_TX   = PA_2,
+    SERIAL_RX   = PA_3,
+    USBTX       = PA_12,
+    USBRX       = PA_11,
+    CANRX       = PB_8,    
+    CANTX       = PB_9,
+    I2C_SCL     = PB_6,
+    I2C_SDA     = PB_7,
+    SPI_MOSI    = PA_7,
+    SPI_MISO    = PA_6,
+    SPI_SCK     = PA_5,
+    SPI_CS      = PA_4,
+    TRACE_SWO   = PB_3,
+    SWO         = PB_3
+} PinName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif