Diff: include/IAP/showDeviceInfo.cpp

Revision:

5:f6a5fc6e1ddd

diff -r 07e0a94f29da -r f6a5fc6e1ddd include/IAP/showDeviceInfo.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/include/IAP/showDeviceInfo.cpp	Thu Jun 23 05:17:36 2016 +0000
@@ -0,0 +1,67 @@
+/**    IAP demo : demo code for internal Flash memory access library
+ *
+ *        The internal Flash memory access is described in the LPC1768 and LPC11U24 usermanual.
+ *            http://www.nxp.com/documents/user_manual/UM10360.pdf
+ *            http://www.nxp.com/documents/user_manual/UM10462.pdf
+ *
+ *               LPC1768 --
+ *                    Chapter  2: "LPC17xx Memory map"
+ *                    Chapter 32: "LPC17xx Flash memory interface and programming"
+ *                    refering Rev. 01 - 4 January 2010
+ *
+ *               LPC11U24 --
+ *                    Chapter  2: "LPC11Uxx Memory mapping"
+ *                    Chapter 20: "LPC11Uxx Flash programming firmware"
+ *                    refering Rev. 03 - 16 July 2012
+ *
+ *  This main.cpp demonstrates how the flash can be erased and wrote.
+ *
+ *  This program tries to...
+ *    0. read device ID and serial#
+
+ *
+ *        Released under the MIT License: http://mbed.org/license/mit
+ */
+
+#include    "mbed.h"
+#include    "IAP.h"
+
+#define     MEM_SIZE        256
+
+#if defined(TARGET_LPC176X)
+#define     TARGET_SECTOR    29     //  use sector 29 as target sector if it is on LPC1768
+#elif defined(TARGET_LPC11UXX) || defined(TARGET_LPC11XX)
+#define     TARGET_SECTOR    7      //  use sector  7 as target sector if it is on LPC11U24
+#define     TARGET_EEPROM_ADDRESS   64
+#define     TARGET_EEPROM_ADDRESS   64
+#elif defined(TARGET_LPC81X) || defined(TARGET_LPC82X)
+#define     TARGET_SECTOR    15      //  use sector  15 as target sector if it is on LPC812
+#endif
+
+
+
+
+void showDeviceInfo()
+{
+    void    memdump( char *p, int n );
+    int     isprint( int c );
+    IAP     iap;
+    int     *serial_number;
+    printf( "\r\n\r\n=== IAP: Flash memory writing test ===\r\n" );
+    printf( "  device-ID = 0x%08X\r\n", iap.read_ID() );
+
+    serial_number = iap.read_serial();
+
+    printf( "  serial# =" );
+    for ( int i = 0; i < 4; i++ )
+        printf( " %08X", *(serial_number + i) );
+    printf( "\r\n" );
+    printf( "  CPU running %dkHz\r\n", SystemCoreClock / 1000 );
+    printf( "  user reserved flash area: start_address=0x%08X, size=%d bytes\r\n", iap.reserved_flash_area_start(), iap.reserved_flash_area_size() );
+    printf( "  read_BootVer=0x%08X\r\r\n", iap.read_BootVer() );
+
+
+}
+
+
+