Andrew R

Important changes to forums and questions

All forums and questions are now archived. To start a new conversation or read the latest updates go to forums.mbed.com.

9 years ago.

1114.h file

I am having a lot of problems with my LPC1114 project - it keeps hanging.

It seems the interrupts are not working correctly.

Do you have the .h file with the interrupt register definitions?

Thank you

Question relating to:

Last updated: 30 Jun 2020
The LPC1114FN28 is an ARM Cortex-M0 based, low-cost 32-bit MCU, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size …

1 Answer

Sam Grove
8 years, 12 months ago.

This is available in mbed-src or mbed-dev

Accepted Answer

Still looking to solve my interrupt problem On the LPC1114 Sam. I was not able to pick anything up from the .h file. Do you have any pointers? Thank you

posted by Andrew R 24 Nov 2015

Quote:

It seems the interrupts are not working correctly.

Not a very good description of the problem but you can have a look at these 2 files.

https://developer.mbed.org/users/mbed_official/code/mbed-dev/file/a457b7fe77eb/targets/cmsis/TARGET_NXP/TARGET_LPC11XX_11CXX/TOOLCHAIN_ARM_MICRO/TARGET_LPC11XX/startup_LPC11xx.S

and

https://developer.mbed.org/users/mbed_official/code/mbed-dev/file/a457b7fe77eb/targets/cmsis/TARGET_NXP/TARGET_LPC11XX_11CXX/LPC11xx.h

posted by Sam Grove 24 Nov 2015