Important changes to forums and questions

All forums and questions are now archived. To start a new conversation or read the latest updates go to forums.mbed.com.

Last updated: 30 Jun 2020
The FRDM-KL46Z is an ultra-low-cost development platform enabled by the Kinetis L series KL4x MCU family built on the ARM® Cortex™-M0+ processor. Features include easy access to MCU I/O, battery-ready, …

ERROR on KL46Z pins map above

Topic last updated 18 Aug 2016, by William Stapleton. 1 reply
Thierry DUBOIS
26 Mar 2015

Be careful. Warning I think the pins PTA1 and PTA2 are reversed on the KL46Z pins map above ....!

William Stapleton
18 Aug 2016

In the schematic document from NXP (FRDM-KL46Z_SCH.pdf), pin PTA1 is located as the last pin on the header and pin PTA2 is located one into the header. The picture above DOES show these pins in the opposite order. The NXP document is correct. The picture above is incorrect.