Japanese | English
マルツ電波とNXPは前回好評に終わったセミナー「ARMマイコンモジュールMBEDを使ってつぶやこう」を再び開催します．このセミナーではmbedの箱を開けるところからTwitterに投稿するまでを実習/解説します．
このセミナーの詳細は次のURLをご参照ください．
http://marutsumake.blog74.fc2.com/blog-entry-680.html
前回7月24日に行われた同セミナーはマルツ電波主催，NXPによるプレゼンテーションと実習で行われました．
12名のご参加(1名はマルツのスタッフ，もう1名はエレキジャック誌筆者の方を含む)をいただきました．(エレキジャックで紹介されたセミナの模様はこちらでご覧になれます http://www.eleki-jack.com/arm/2010/07/armmbed.html )
このセミナーは半日(4.5時間)という短時間で，ほとんどの方がmbedを触るのが初めてだったにもかかわらず，箱を開けてからキャラクタ液晶，ツイッターへの投稿までを体験いただけました．
mbedの高度に抽象化されたライブラリを用いることで，高機能アプリケーションが組めることをご理解いただけたと思います．
On 11-September-2010 (Satureday), Marutsu (one of large electrinics parts shop in Japan) and NXP-Japan will hold a half-day workshop: "Tweeting mbed" again in Akihabara, Tokyo. The people who take this workshop will go through how to use the mbed from opening box to Twitter posting.
Please refer to next URL for more details (Japnese only)
http://marutsumake.blog74.fc2.com/blog-entry-680.html
All this workshop will be done in Japanese language.
...on 24-July,last time, Marutsu (an electronics parts shop in Akihabara, Tokyo) organized a mbed hands-on work shop (see pictures above). The presentation and the workshop sessions have been done by NXP-Japan.
Total 12 people (including 1 shop staff and 1 writer for a technical magazine: "Eleki-Jack") attended to the sessions (The article of Eleki-Jack can be found here http://www.eleki-jack.com/arm/2010/07/armmbed.html ).
In spite of those people were new for the mbed (and it was only half day (4.5 hours)), they could work out all challenges from opening the box to TextLCD and Twitter applications with breadboard wirings.
The highly abstracted mbed class library helped to build those high level applications in short time.
NXP fan (in Japan).
0
replies
Japanese | English
マルツ電波とNXPは前回好評に終わったセミナー「ARMマイコンモジュールMBEDを使ってつぶやこう」を再び開催します．このセミナーではmbedの箱を開けるところからTwitterに投稿するまでを実習/解説します．
このセミナーの詳細は次のURLをご参照ください．
http://marutsumake.blog74.fc2.com/blog-entry-680.html
前回7月24日に行われた同セミナーはマルツ電波主催，NXPによるプレゼンテーションと実習で行われました．
12名のご参加(1名はマルツのスタッフ，もう1名はエレキジャック誌筆者の方を含む)をいただきました．(エレキジャックで紹介されたセミナの模様はこちらでご覧になれます http://www.eleki-jack.com/arm/2010/07/armmbed.html )
このセミナーは半日(4.5時間)という短時間で，ほとんどの方がmbedを触るのが初めてだったにもかかわらず，箱を開けてからキャラクタ液晶，ツイッターへの投稿までを体験いただけました．
mbedの高度に抽象化されたライブラリを用いることで，高機能アプリケーションが組めることをご理解いただけたと思います．
On 11-September-2010 (Satureday), Marutsu (one of large electrinics parts shop in Japan) and NXP-Japan will hold a half-day workshop: "Tweeting mbed" again in Akihabara, Tokyo. The people who take this workshop will go through how to use the mbed from opening box to Twitter posting.
Please refer to next URL for more details (Japnese only)
http://marutsumake.blog74.fc2.com/blog-entry-680.html
All this workshop will be done in Japanese language.
...on 24-July,last time, Marutsu (an electronics parts shop in Akihabara, Tokyo) organized a mbed hands-on work shop (see pictures above). The presentation and the workshop sessions have been done by NXP-Japan.
Total 12 people (including 1 shop staff and 1 writer for a technical magazine: "Eleki-Jack") attended to the sessions (The article of Eleki-Jack can be found here http://www.eleki-jack.com/arm/2010/07/armmbed.html ).
In spite of those people were new for the mbed (and it was only half day (4.5 hours)), they could work out all challenges from opening the box to TextLCD and Twitter applications with breadboard wirings.
The highly abstracted mbed class library helped to build those high level applications in short time.