Important changes to forums and questions

All forums and questions are now archived. To start a new conversation or read the latest updates go to forums.mbed.com.

Sending several signals over one radio channel

Topic last updated 16 Jul 2024, by Gregory Martin. 2 replies
Gregory Martin
23 Mar 2012

I had a dissapointing experience with a RN-XV wifly module and couldnt get it to work. I thought I'd try this pair of transcievers instead. FT1100A Wireless Digital Transmission Module ISM band 100mW 5/3.3V DIP Interface from ebay. I'd like to send a video signal from a camera mounted on my robot and also use the same radio to send and recieve simple control data. How can this be done ?

Gregory Martin
23 Mar 2012

Hi Christian Maybe I'll be able to get away with a very low refresh rate using a black and white cmos camera. But I was interested if anysort of multiplexing might be possible. A control channel should not take up too much bandwidth. I have spent a total time of perhaps 20 hours tring to get the Wifly working. As you suggest 'll have another go