RF4463PRO module adopts Silicon Lab Si4463 RF chip, which is a highly integrated wireless ISM band transceiver chip. Extremely high receive sensitivity (-121 dBm) and +20 dBm output power ensure that the covering of the range and improve the data link performance. Built-in antenna diversity and the hopping function can be used to aggressively improve the performance.

Working voltage: 1.8-3.6V Working frequency: 433/470/868/915 MHz Output power: -520dBm (2000m distance) Modulation mode: (G)FSK/4(G)FSK/(G)MSK/OOK/ASK Sleep current: <0.1uA Receiving current: 10.713.5mA Transmitting current: 850mA@20dBm Sensitivity: -126dBm RF data rate: 0.1231000Kbps

Features:

• FrenquencyRange：433/470/868/915（Customizable 142-1050MHZ）
• Sensitivity up to -126dBm
• Maximum output power：20dBm
• 10mA@receiver status
• Data transfer rate：0.1-1000kbps
• (G)FSK, 4(G)FSK, (G)MSK OOK and ASK modulation mode
• 1.8-3.6 V power supply
• Ultra-low consumption shutdown mode
• Digital received signal strength indicator(RSSI)
• Timed wake-up function
• Antenna automatic matching and bi-direction switch control
• Configurable packet structure
• Preamable detection
• 64/128 bytes transmit and receive data register (FIFO)
• Low power detection
• Temperature sensor and 8 bits analog-to-digital converters
• Working temperature range：-40 ~ +85°C
• Integrated voltage regulator
• Frequency hopping
• Power-on reset function
• Puilt-in crystal adjustment function

Applications:

• Remote control
• Remote meter reading
• Home security alarm and remote keyless entry
• Industrial control
• Home automation remote sensing
• Individual data records
• Toys control
• Sensor network
• Tire pressure monitoring
• Health monitoring
• Wireless PC peripherals
• Tag reading and writing

http://www.nicerf.com Aliexpress store: http://www.aliexpress.com/store/934254

Hi Is there any mbed library to use this module?

Regards

what do you mean by mbed library? you can email to: kelly@nicerf.com

Because you advertised your module here on mbed, everybody expects a library on mbed (a driver). I checked the component page, for the module Si4463 there's no library yet. Will it be available on mbed? That's what Behdad Khoshbin asked for.

Regards,
0xc0170

Thanks for the information, I find a same transceiver with higher temperature range on www.fiberoptictransceiver.net