Important changes to forums and questions
All forums and questions are now archived. To start a new conversation or read the latest updates go to forums.mbed.com.
All forums and questions are now archived. To start a new conversation or read the latest updates go to forums.mbed.com.
Hi,
After reading the topic http://mbed.org/cookbook/Ethernet-RJ45, and beeing "less" knowledgeable on the magnetics department, i thought i'd better ask this and look dumb, in stead of blowing up 3 MBED's.
Has anyone experience in setting up an a DUMB RJ45 using POE? Or point me to a schematic / parts list for a female connector i can somewhat rugged install in the wall of a console?
I'm considering this: http://www.yds.com.tw/driver/drivers/13F-20XX%20Series%20PDF%20Catalogue.pdf behind a dumb RJ45.
I want to power 2 consoles (14 keys, an lcd and an MBED) over a 100Mbit network using POE and 10 - 15 meter cables. I feed the cable with 12V, and use an UBEC (mini switching power supply) to feed 5V to the MBED and the LCD.
Any insight would be welcome!
Theo (NL)