Mailbox definition. More...
#include "stm32_wpan_common.h"Go to the source code of this file.
Data Structures | |
| struct | MB_DeviceInfoTable_t |
| struct | MB_BleTable_t |
| struct | MB_ThreadTable_t |
| struct | MB_LldTestsTable_t |
| struct | MB_LldBleTable_t |
| struct | MB_ZigbeeTable_t |
| struct | MB_SysTable_t |
| msg [0:7] = cmd/evt [8:31] = Reserved More... | |
| struct | MB_MemManagerTable_t |
| struct | MB_TracesTable_t |
| struct | MB_Mac_802_15_4_t |
| struct | MB_RefTable_t |
Macros | |
| #define | HW_IPCC_BLE_CMD_CHANNEL LL_IPCC_CHANNEL_1 |
| IPCC CHANNELS. More... | |
| #define | HW_IPCC_BLE_EVENT_CHANNEL LL_IPCC_CHANNEL_1 |
| CPU2. More... | |
Variables | |
| typedef | PACKED_STRUCT |
| This file shall be identical between the CPU1 and the CPU2. More... | |
Mailbox definition.
This software component is licensed by ST under BSD 3-Clause license, the "License"; You may not use this file except in compliance with the License. You may obtain a copy of the License at: opensource.org/licenses/BSD-3-Clause
Definition in file mbox_def.h.
| #define HW_IPCC_BLE_CMD_CHANNEL LL_IPCC_CHANNEL_1 |
| #define HW_IPCC_BLE_EVENT_CHANNEL LL_IPCC_CHANNEL_1 |
CPU2.
Definition at line 243 of file mbox_def.h.
| typedef PACKED_STRUCT |
This file shall be identical between the CPU1 and the CPU2.
This format shall be used for all events (asynchronous and command response) reported by the CPU2 except for the command response of a system command where the header is not there and the format to be used shall be TL_EvtSerial_t.
This the payload of TL_Evt_t for an asynchronous event.
This the payload of TL_Evt_t for a command complete event.
This the payload of TL_Evt_t for a command status event.
Command parameters.
THE ORDER SHALL NOT BE CHANGED.
SHCI_SUB_EVT_NVM_END_ERASE This notifies the CPU1 that the CPU2 has erased all expected flash sectors.
SHCI_SUB_EVT_NVM_END_WRITE This notifies the CPU1 that the CPU2 has written all expected data in Flash.
SHCI_SUB_EVT_NVM_START_WRITE This notifies the CPU1 that the CPU2 has started a write procedure in Flash NumberOfWords : The number of 64bits data the CPU2 needs to write in Flash.
SHCI_SUB_EVT_OT_NVM_RAM_UPDATE This notifies the CPU1 which part of the OT NVM RAM has been updated so that only the modified section could be written in Flash/NVM StartAddress : Start address of the section that has been modified Size : Size (in bytes) of the section that has been modified.
SHCI_SUB_EVT_BLE_NVM_RAM_UPDATE This notifies the CPU1 which part of the BLE NVM RAM has been updated so that only the modified section could be written in Flash/NVM StartAddress : Start address of the section that has been modified Size : Size (in bytes) of the section that has been modified.
SHCI_SUB_EVT_ERROR_NOTIF This reports to the CPU1 some error form the CPU2.
TABLES Version [0:3] = Build - 0: Untracked - 15:Released - x: Tracked version [4:7] = branch - 0: Mass Market - x: ... [8:15] = Subversion [16:23] = Version minor [24:31] = Version major
Memory Size [0:7] = Flash ( Number of 4k sector) [8:15] = Reserved ( Shall be set to 0 - may be used as flash extension ) [16:23] = SRAM2b ( Number of 1k sector) [24:31] = SRAM2a ( Number of 1k sector)
For each 64bits data, the algorithm as described in AN5289 is executed. When this number is reported to 0, it means the Number of 64bits to be written was unknown when the procedure has started. When all data are written, the SHCI_SUB_EVT_NVM_END_WRITE event is reported
SHCI_SUB_EVT_NVM_START_ERASE This notifies the CPU1 that the CPU2 has started a erase procedure in Flash NumberOfSectors : The number of sectors the CPU2 needs to erase in Flash. For each sector, the algorithm as described in AN5289 is executed. When this number is reported to 0, it means the Number of sectors to be erased was unknown when the procedure has started. When all sectors are erased, the SHCI_SUB_EVT_NVM_END_ERASE event is reported
NOT USED CURRENTLY
Note: Be careful that the asynchronous events reported by the CPU2 on the system channel do include the header and shall use TL_EvtPacket_t format. Only the command response format on the system channel is different.
Definition at line 56 of file mbox_def.h.