Modules
	Tests
	QSPI tests of the HAL.

Data Structures
struct	qspi_command
	QSPI command. More...

Typedefs
typedef struct qspi_s	qspi_t
	QSPI HAL object. More...

typedef enum qspi_bus_width	qspi_bus_width_t
	QSPI Bus width. More...

typedef enum qspi_address_size	qspi_address_size_t
	Address size in bits. More...

typedef uint8_t	qspi_alt_size_t
	Alternative size in bits. More...

typedef struct qspi_command	qspi_command_t
	QSPI command. More...

typedef enum qspi_status	qspi_status_t
	QSPI return status. More...

Enumerations

Functions
qspi_status_t	qspi_init (qspi_t *obj, PinName io0, PinName io1, PinName io2, PinName io3, PinName sclk, PinName ssel, uint32_t hz, uint8_t mode)
	Initialize QSPI peripheral. More...

qspi_status_t	qspi_free (qspi_t *obj)
	Deinitilize QSPI peripheral. More...

qspi_status_t	qspi_frequency (qspi_t *obj, int hz)
	Set the QSPI baud rate. More...

qspi_status_t	qspi_write (qspi_t obj, const qspi_command_t command, const void data, size_t length)
	Send a command and block of data. More...

qspi_status_t	qspi_command_transfer (qspi_t obj, const qspi_command_t command, const void tx_data, size_t tx_size, void rx_data, size_t rx_size)
	Send a command (and optionally data) and get the response. More...

qspi_status_t	qspi_read (qspi_t obj, const qspi_command_t command, void data, size_t length)
	Receive a command and block of data. More...

const PinMap *	qspi_master_sclk_pinmap (void)
	Get the pins that support QSPI SCLK. More...

const PinMap *	qspi_master_ssel_pinmap (void)
	Get the pins that support QSPI SSEL. More...

const PinMap *	qspi_master_data0_pinmap (void)
	Get the pins that support QSPI DATA0. More...

const PinMap *	qspi_master_data1_pinmap (void)
	Get the pins that support QSPI DATA1. More...

const PinMap *	qspi_master_data2_pinmap (void)
	Get the pins that support QSPI DATA2. More...

const PinMap *	qspi_master_data3_pinmap (void)
	Get the pins that support QSPI DATA3. More...

Detailed Description

Typedef Documentation

typedef enum qspi_address_size qspi_address_size_t

Address size in bits.

typedef uint8_t qspi_alt_size_t

Alternative size in bits.

Definition at line 63 of file qspi_api.h.

typedef enum qspi_bus_width qspi_bus_width_t

QSPI Bus width.

Some parts of commands provide variable bus width

typedef struct qspi_command qspi_command_t

QSPI command.

Defines a frame format. It consists of instruction, address, alternative, dummy count and data

typedef enum qspi_status qspi_status_t

QSPI return status.

typedef struct qspi_s qspi_t

QSPI HAL object.

Definition at line 40 of file qspi_api.h.

Enumeration Type Documentation

enum qspi_address_size

Address size in bits.

Definition at line 54 of file qspi_api.h.

enum qspi_bus_width

QSPI Bus width.

Some parts of commands provide variable bus width

Definition at line 46 of file qspi_api.h.

enum qspi_status

QSPI return status.

Enumerator
QSPI_STATUS_ERROR	Generic error >
QSPI_STATUS_INVALID_PARAMETER	The parameter is invalid >
QSPI_STATUS_OK	Function executed sucessfully >

Definition at line 102 of file qspi_api.h.

Function Documentation

qspi_status_t qspi_command_transfer	(	qspi_t *	obj,
		const qspi_command_t *	command,
		const void *	tx_data,
		size_t	tx_size,
		void *	rx_data,
		size_t	rx_size
	)

Send a command (and optionally data) and get the response.

Can be used to send/receive device specific commands

Parameters

obj	QSPI object
command	QSPI command
tx_data	TX buffer
tx_size	TX buffer length in bytes
rx_data	RX buffer
rx_size	RX buffer length in bytes

Returns: QSPI_STATUS_OK if the data has been succesfully sent QSPI_STATUS_INVALID_PARAMETER if invalid parameter found QSPI_STATUS_ERROR otherwise

qspi_status_t qspi_free ( qspi_t * obj )

Deinitilize QSPI peripheral.

It should release pins that are associated with the QSPI object, and disable clocks for QSPI peripheral module that was associated with the object

Parameters

obj	QSPI object

Returns: QSPI_STATUS_OK if deinitialisation successfully executed QSPI_STATUS_INVALID_PARAMETER if invalid parameter found QSPI_STATUS_ERROR otherwise

qspi_status_t qspi_frequency	(	qspi_t *	obj,
		int	hz
	)

Set the QSPI baud rate.

Actual frequency may differ from the desired frequency due to available dividers and the bus clock Configures the QSPI peripheral's baud rate

Parameters

obj	The SPI object to configure
hz	The baud rate in Hz

Returns: QSPI_STATUS_OK if frequency was set QSPI_STATUS_INVALID_PARAMETER if invalid parameter found QSPI_STATUS_ERROR otherwise

qspi_status_t qspi_init	(	qspi_t *	obj,
		PinName	io0,
		PinName	io1,
		PinName	io2,
		PinName	io3,
		PinName	sclk,
		PinName	ssel,
		uint32_t	hz,
		uint8_t	mode
	)

Initialize QSPI peripheral.

It should initialize QSPI pins (io0-io3, sclk and ssel), set frequency, clock polarity and phase mode. The clock for the peripheral should be enabled

Parameters

obj	QSPI object
io0	Data pin 0
io1	Data pin 1
io2	Data pin 2
io3	Data pin 3
sclk	The clock pin
ssel	The chip select pin
hz	The bus frequency
mode	Clock polarity and phase mode (0 - 3)

Returns: QSPI_STATUS_OK if initialisation successfully executed QSPI_STATUS_INVALID_PARAMETER if invalid parameter found QSPI_STATUS_ERROR otherwise

const PinMap* qspi_master_data0_pinmap ( void )

Get the pins that support QSPI DATA0.

Return a PinMap array of pins that support QSPI DATA0 in master mode. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

const PinMap* qspi_master_data1_pinmap ( void )

Get the pins that support QSPI DATA1.

Return a PinMap array of pins that support QSPI DATA1 in master mode. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

const PinMap* qspi_master_data2_pinmap ( void )

Get the pins that support QSPI DATA2.

Return a PinMap array of pins that support QSPI DATA2 in master mode. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

const PinMap* qspi_master_data3_pinmap ( void )

Get the pins that support QSPI DATA3.

Return a PinMap array of pins that support QSPI DATA3 in master mode. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

const PinMap* qspi_master_sclk_pinmap ( void )

Get the pins that support QSPI SCLK.

Return a PinMap array of pins that support QSPI SCLK in master mode. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

const PinMap* qspi_master_ssel_pinmap ( void )

Get the pins that support QSPI SSEL.

Return a PinMap array of pins that support QSPI SSEL in master mode. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

qspi_status_t qspi_read	(	qspi_t *	obj,
		const qspi_command_t *	command,
		void *	data,
		size_t *	length
	)

Receive a command and block of data.

Parameters

	obj	QSPI object
	command	QSPI command
	data	RX buffer
[in,out]	length	in - RX buffer length in bytes, out - number of bytes read

Returns: QSPI_STATUS_OK if data has been succesfully received QSPI_STATUS_INVALID_PARAMETER if invalid parameter found QSPI_STATUS_ERROR otherwise

qspi_status_t qspi_write	(	qspi_t *	obj,
		const qspi_command_t *	command,
		const void *	data,
		size_t *	length
	)

Send a command and block of data.

Parameters

	obj	QSPI object
	command	QSPI command
	data	TX buffer
[in,out]	length	in - TX buffer length in bytes, out - number of bytes written

Returns: QSPI_STATUS_OK if the data has been succesfully sent QSPI_STATUS_INVALID_PARAMETER if invalid parameter found QSPI_STATUS_ERROR otherwise

Modules

Data Structures

Typedefs

Enumerations

Functions

Detailed Description

Typedef Documentation

Enumeration Type Documentation

Function Documentation

Important Information for this Arm website