Mbed OS Reference | crc_api.h Source File

 /** \addtogroup hal */
 /** @{*/
 /* mbed Microcontroller Library
  * Copyright (c) 2018 ARM Limited
  * SPDX-License-Identifier: Apache-2.0
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 #ifndef MBED_CRC_HAL_API_H
 #define MBED_CRC_HAL_API_H
 
 #include <stdbool.h>
 #include <stddef.h>
 #include <stdint.h>
 
 /** CRC Polynomial value
  *
  * Different polynomial values supported
  */
 typedef enum crc_polynomial {
     POLY_OTHER       = 0,            ///< Custom polynomial
     POLY_8BIT_CCITT  = 0x07,         ///< x8+x2+x+1
     POLY_7BIT_SD     = 0x9,          ///< x7+x3+1
     POLY_16BIT_CCITT = 0x1021,       ///< x16+x12+x5+1
     POLY_16BIT_IBM   = 0x8005,       ///< x16+x15+x2+1
     POLY_32BIT_ANSI  = 0x04C11DB7,   ///< x32+x26+x23+x22+x16+x12+x11+x10+x8+x7+x5+x4+x2+x+1
     POLY_32BIT_REV_ANSI = 0xEDB88320 ///< x31+x30+x29+x27+x26+x24+x23+x21+x20+x19+x15+x9+x8+x5
 } crc_polynomial_t;
 
 typedef struct crc_mbed_config {
     /** CRC Polynomial. Example polynomial: 0x21 = 0010_0011 = x^5+x+1 */
     uint32_t polynomial;
     /** CRC Bit Width */
     uint32_t width;
     /** Initial seed value for the computation. */
     uint32_t initial_xor;
     /** Final xor value for the computation. */
     uint32_t final_xor;
     /** Reflect bits on input. */
     bool reflect_in;
     /** Reflect bits in final result before returning. */
     bool reflect_out;
 } crc_mbed_config_t;
 
 #if DEVICE_CRC
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 /**
  * \defgroup hal_crc Hardware CRC
  *
  * The Hardware CRC HAL API provides a low-level interface to the Hardware CRC
  * module of a target platform.
  *
  * # Defined behaviour
  *
  * * Function hal_crc_is_supported() returns true if platform supports hardware
  *   CRC for the given polynomial/width - verified by test ::crc_is_supported_test.
  * * Function hal_crc_is_supported() returns false if platform does not support hardware
  *   CRC for the given polynomial/width - verified by test ::crc_is_supported_test.
  * * Function hal_crc_is_supported() returns false if given pointer to configuration
  *   structure is undefined (NULL) - verified by test ::crc_is_supported_invalid_param_test.
  * * If CRC module does not support one of the following settings: initial_xor, final_xor
  *   reflect_in, reflect_out, then these operations should be handled by the driver
  *   - Verified by test ::crc_calc_single_test.
  * * Platform which supports hardware CRC must be able to handle at least one of the predefined
  *   polynomial/width configurations that can be constructed in the MbedCRC class: POLY_8BIT_CCITT,
  *   POLY_7BIT_SD, POLY_16BIT_CCITT, POLY_16BIT_IBM, POLY_32BIT_ANSI
  *   - verified by test ::crc_is_supported_test, ::crc_calc_single_test.
  * * Function hal_crc_compute_partial_start() configures CRC module with the given configuration
  *   - Verified by test ::crc_calc_single_test.
  * * Calling hal_crc_compute_partial_start() without finalising the
  *   CRC calculation overrides the current configuration - Verified by test ::crc_reconfigure_test.
  * * Function hal_crc_compute_partial() writes data to the CRC module - verified by test ::crc_calc_single_test.
  * * Function hal_crc_compute_partial() can be call multiple times in succession in order to
  *   provide additional data to CRC module - verified by test ::crc_calc_multi_test.
  * * Function hal_crc_compute_partial() does nothing if pointer to buffer is undefined or
  *   data length is equal to 0 - verified by test ::crc_compute_partial_invalid_param_test.
  * * Function hal_crc_get_result() returns the checksum result from the CRC module
  *   - verified by tests ::crc_calc_single_test, ::crc_calc_multi_test, ::crc_reconfigure_test.
  *
  * # Undefined behaviour
  *
  * * Calling hal_crc_compute_partial_start() function with invalid (unsupported) polynomial.
  * * Calling hal_crc_compute_partial() or hal_crc_get_result() functions before hal_crc_compute_partial_start().
  * * Calling hal_crc_get_result() function multiple times.
  *
  * # Non-functional requirements
  *
  * * CRC configuration provides the following settings:
  *   * polynomial - CRC Polynomial,
  *   * width - CRC bit width,
  *   * initial_xor - seed value for the computation,
  *   * final_xor - final xor value for the computation,
  *   * reflect_in - reflect bits on input,
  *   * reflect_out - reflect bits in final result before returning.
  *
  * # Potential bugs
  *
  * @{
  */
 
 /**
  * \defgroup hal_crc_tests crc hal tests
  * The crc HAL tests ensure driver conformance to defined behaviour.
  *
  * To run the crc hal tests use the command:
  *
  *     mbed test -t <toolchain> -m <target> -n tests-mbed_hal-crc*
  *
  */
 
 /** Determine if the current platform supports hardware CRC for given polynomial
  *
  * The purpose of this function is to inform the CRC Platform API whether the
  * current platform has a hardware CRC module and that it can support the
  * requested polynomial.
  *
  * Supported polynomials are restricted to the named polynomials that can be
  * constructed in the MbedCRC class, POLY_8BIT_CCITT, POLY_7BIT_SD,
  * POLY_16BIT_CCITT, POLY_16BIT_IBM and POLY_32BIT_ANSI.
  *
  * The current platform must support the given polynomials default parameters
  * in order to return a true response. These include: reflect in, reflect out,
  * initial xor and final xor. For example, POLY_32BIT_ANSI requires an initial
  * and final xor of 0xFFFFFFFF, and reflection of both input and output. If any
  * of these settings cannot be configured, the polynomial is not supported.
  *
  * This function is thread safe; it safe to call from multiple contexts if
  * required.
  *
  * \param config Contains CRC configuration parameters for initializing the
  *               hardware CRC module. For example, polynomial and initial seed
  *               values.
  *
  * \return  True if running if the polynomial is supported, false if not.
  */
 bool hal_crc_is_supported(const crc_mbed_config_t *config);
 
 /** Initialize the hardware CRC module with the given polynomial
  *
  * After calling this function, the CRC HAL module is ready to receive data
  * using the hal_crc_compute_partial() function. The CRC module on the board
  * is configured internally with the specified configuration and is ready
  * to receive data.
  *
  * The platform configures itself based on the default configuration
  * parameters of the input polynomial.
  *
  * This function must be called before calling hal_crc_compute_partial().
  *
  * This function must be called with a valid polynomial supported by the
  * platform. The polynomial must be checked for support using the
  * hal_crc_is_supported() function.
  *
  * Calling hal_crc_compute_partial_start() multiple times without finalizing the
  * CRC calculation with hal_crc_get_result() overrides the current
  * configuration and state, and the intermediate result of the computation is
  * lost.
  *
  * This function is not thread safe. A CRC calculation must not be started from
  * two different threads or contexts at the same time; calling this function
  * from two different contexts may lead to configurations being overwritten and
  * results being lost.
  *
  * \param config Contains CRC configuration parameters for initializing the
  *               hardware CRC module. For example, polynomial and initial seed
  *               values.
  */
 void hal_crc_compute_partial_start(const crc_mbed_config_t *config);
 
 /** Writes data to the current CRC module.
  *
  * Writes input data buffer bytes to the CRC data register. The CRC module
  * must interpret the data as an array of bytes.
  *
  * The final transformations are not applied to the data; the CRC module must
  * retain the intermediate result so that additional calls to this function
  * can be made, appending the additional data to the calculation.
  *
  * To obtain the final result of the CRC calculation, hal_crc_get_result() is
  * called to apply the final transformations to the data.
  *
  * If the function is passed an undefined pointer, or the size of the buffer is
  * specified to be 0, this function does nothing and returns.
  *
  * This function can be called multiple times in succession. This can be used
  * to calculate the CRC result of streamed data.
  *
  * This function is not thread safe. There is only one instance of the CRC
  * module active at a time. Calling this function from multiple contexts
  * appends different data to the same, single instance of the module, which causes an
  * erroneous value to be calculated.
  *
  * \param data Input data stream to be written into the CRC calculation
  * \param size Size of the data stream in bytes
  */
 void hal_crc_compute_partial(const uint8_t *data, const size_t size);
 
 /* Reads the checksum result from the CRC module.
  *
  * Reads the final checksum result for the final checksum value. The returned
  * value is cast as an unsigned 32-bit integer. The actual size of the returned
  * result depends on the polynomial used to configure the CRC module.
  *
  * Additional transformations that are used in the default configuration of the
  * input polynomial are applied to the result before it is returned from this
  * function. These transformations include: the final xor being appended to the
  * calculation, and the result being reflected if required.
  *
  * Calling this function multiple times is undefined. The first call to this
  * function returns the final result of the CRC calculation. The return
  * value on successive calls is undefined because the contents of the register after
  * accessing them is platform-specific.
  *
  * This function is not thread safe. There is only one instance of the CRC
  * module active at a time. Calling this function from multiple contexts may
  * return incorrect data or affect the current state of the module.
  *
  * \return The final CRC checksum after the reflections and final calculations
  *         have been applied.
  */
 uint32_t hal_crc_get_result(void);
 
 /**@}*/
 
 #ifdef __cplusplus
 };
 #endif
 
 #endif // DEVICE_CRC
 #endif // MBED_CRC_HAL_API_H
 
 /**@}*/
Important Information for this Arm website
