A digital input bus, used for reading the state of a collection of pins. More...

#include <BusIn.h>

Inheritance diagram for BusIn:

Public Member Functions
	BusIn (PinName p0, PinName p1=NC, PinName p2=NC, PinName p3=NC, PinName p4=NC, PinName p5=NC, PinName p6=NC, PinName p7=NC, PinName p8=NC, PinName p9=NC, PinName p10=NC, PinName p11=NC, PinName p12=NC, PinName p13=NC, PinName p14=NC, PinName p15=NC)
	Create an BusIn, connected to the specified pins. More...

	BusIn (PinName pins[16])
	Create an BusIn, connected to the specified pins. More...

int	read ()
	Read the value of the input bus. More...

void	mode (PinMode pull)
	Set the input pin mode. More...

int	mask ()
	Binary mask of bus pins connected to actual pins (not NC pins) If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1. More...

	operator int ()
	A shorthand for read() More...

DigitalIn &	operator[] (int index)
	Access to particular bit in random-iterator fashion. More...

Detailed Description

A digital input bus, used for reading the state of a collection of pins.

Note: Synchronization level: Thread safe

Definition at line 33 of file BusIn.h.

Constructor & Destructor Documentation

BusIn	(	PinName	p0,
		PinName	p1 = `NC`,
		PinName	p2 = `NC`,
		PinName	p3 = `NC`,
		PinName	p4 = `NC`,
		PinName	p5 = `NC`,
		PinName	p6 = `NC`,
		PinName	p7 = `NC`,
		PinName	p8 = `NC`,
		PinName	p9 = `NC`,
		PinName	p10 = `NC`,
		PinName	p11 = `NC`,
		PinName	p12 = `NC`,
		PinName	p13 = `NC`,
		PinName	p14 = `NC`,
		PinName	p15 = `NC`
	)

Create an BusIn, connected to the specified pins.

Parameters

p0	DigitalIn pin to connect to bus bit
p1	DigitalIn pin to connect to bus bit
p2	DigitalIn pin to connect to bus bit
p3	DigitalIn pin to connect to bus bit
p4	DigitalIn pin to connect to bus bit
p5	DigitalIn pin to connect to bus bit
p6	DigitalIn pin to connect to bus bit
p7	DigitalIn pin to connect to bus bit
p8	DigitalIn pin to connect to bus bit
p9	DigitalIn pin to connect to bus bit
p10	DigitalIn pin to connect to bus bit
p11	DigitalIn pin to connect to bus bit
p12	DigitalIn pin to connect to bus bit
p13	DigitalIn pin to connect to bus bit
p14	DigitalIn pin to connect to bus bit
p15	DigitalIn pin to connect to bus bit

Note: It is only required to specify as many pin variables as is required for the bus; the rest will default to NC (not connected)

BusIn ( PinName pins[16] )

Create an BusIn, connected to the specified pins.

Parameters

pins	An array of pins to connect to bus bit

Member Function Documentation

int mask ( )

Binary mask of bus pins connected to actual pins (not NC pins) If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1.

Returns: Binary mask of connected pins

Definition at line 94 of file BusIn.h.

void mode ( PinMode pull )

Set the input pin mode.

Parameters

pull	PullUp, PullDown, PullNone

operator int ( )

A shorthand for read()

See also: DigitalIn::read()

DigitalIn& operator[] ( int index )

Access to particular bit in random-iterator fashion.

Parameters

index Position of bit

int read ( )

Read the value of the input bus.

Returns: An integer with each bit corresponding to the value read from the associated DigitalIn pin

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Important Information for this Arm website