Mistake on this page?
Report an issue in GitHub or email us
pca10036.h
1 /**
2  * Copyright (c) 2014 - 2019, Nordic Semiconductor ASA
3  *
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without modification,
7  * are permitted provided that the following conditions are met:
8  *
9  * 1. Redistributions of source code must retain the above copyright notice, this
10  * list of conditions and the following disclaimer.
11  *
12  * 2. Redistributions in binary form, except as embedded into a Nordic
13  * Semiconductor ASA integrated circuit in a product or a software update for
14  * such product, must reproduce the above copyright notice, this list of
15  * conditions and the following disclaimer in the documentation and/or other
16  * materials provided with the distribution.
17  *
18  * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
19  * contributors may be used to endorse or promote products derived from this
20  * software without specific prior written permission.
21  *
22  * 4. This software, with or without modification, must only be used with a
23  * Nordic Semiconductor ASA integrated circuit.
24  *
25  * 5. Any software provided in binary form under this license must not be reverse
26  * engineered, decompiled, modified and/or disassembled.
27  *
28  * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
29  * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
30  * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
31  * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
32  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
33  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
34  * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
35  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
36  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
37  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38  *
39  */
40 #ifndef PCA10036_H
41 #define PCA10036_H
42 
43 #ifdef __cplusplus
44 extern "C" {
45 #endif
46 
47 #include "nrf_gpio.h"
48 
49 // LEDs definitions for PCA10036
50 #define LEDS_NUMBER 4
51 
52 #define LED_START 17
53 #define LED_1 17
54 #define LED_2 18
55 #define LED_3 19
56 #define LED_4 20
57 #define LED_STOP 20
58 
59 #define LEDS_ACTIVE_STATE 0
60 
61 #define LEDS_INV_MASK LEDS_MASK
62 
63 #define LEDS_LIST { LED_1, LED_2, LED_3, LED_4 }
64 
65 #define BSP_LED_0 LED_1
66 #define BSP_LED_1 LED_2
67 #define BSP_LED_2 LED_3
68 #define BSP_LED_3 LED_4
69 
70 #define BUTTONS_NUMBER 4
71 
72 #define BUTTON_START 13
73 #define BUTTON_1 13
74 #define BUTTON_2 14
75 #define BUTTON_3 15
76 #define BUTTON_4 16
77 #define BUTTON_STOP 16
78 #define BUTTON_PULL NRF_GPIO_PIN_PULLUP
79 
80 #define BUTTONS_ACTIVE_STATE 0
81 
82 #define BUTTONS_LIST { BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4 }
83 
84 #define BSP_BUTTON_0 BUTTON_1
85 #define BSP_BUTTON_1 BUTTON_2
86 #define BSP_BUTTON_2 BUTTON_3
87 #define BSP_BUTTON_3 BUTTON_4
88 
89 #define RX_PIN_NUMBER 8
90 #define TX_PIN_NUMBER 6
91 #define CTS_PIN_NUMBER 7
92 #define RTS_PIN_NUMBER 5
93 #define HWFC true
94 
95 #define SPIS_MISO_PIN 28 // SPI MISO signal.
96 #define SPIS_CSN_PIN 12 // SPI CSN signal.
97 #define SPIS_MOSI_PIN 25 // SPI MOSI signal.
98 #define SPIS_SCK_PIN 29 // SPI SCK signal.
99 
100 #define SPIM0_SCK_PIN 29 // SPI clock GPIO pin number.
101 #define SPIM0_MOSI_PIN 25 // SPI Master Out Slave In GPIO pin number.
102 #define SPIM0_MISO_PIN 28 // SPI Master In Slave Out GPIO pin number.
103 #define SPIM0_SS_PIN 12 // SPI Slave Select GPIO pin number.
104 
105 #define SPIM1_SCK_PIN 2 // SPI clock GPIO pin number.
106 #define SPIM1_MOSI_PIN 3 // SPI Master Out Slave In GPIO pin number.
107 #define SPIM1_MISO_PIN 4 // SPI Master In Slave Out GPIO pin number.
108 #define SPIM1_SS_PIN 5 // SPI Slave Select GPIO pin number.
109 
110 #define SPIM2_SCK_PIN 12 // SPI clock GPIO pin number.
111 #define SPIM2_MOSI_PIN 13 // SPI Master Out Slave In GPIO pin number.
112 #define SPIM2_MISO_PIN 14 // SPI Master In Slave Out GPIO pin number.
113 #define SPIM2_SS_PIN 15 // SPI Slave Select GPIO pin number.
114 
115 // serialization APPLICATION board - temp. setup for running serialized MEMU tests
116 #define SER_APP_RX_PIN 23 // UART RX pin number.
117 #define SER_APP_TX_PIN 24 // UART TX pin number.
118 #define SER_APP_CTS_PIN 2 // UART Clear To Send pin number.
119 #define SER_APP_RTS_PIN 25 // UART Request To Send pin number.
120 
121 #define SER_APP_SPIM0_SCK_PIN 27 // SPI clock GPIO pin number.
122 #define SER_APP_SPIM0_MOSI_PIN 2 // SPI Master Out Slave In GPIO pin number
123 #define SER_APP_SPIM0_MISO_PIN 26 // SPI Master In Slave Out GPIO pin number
124 #define SER_APP_SPIM0_SS_PIN 23 // SPI Slave Select GPIO pin number
125 #define SER_APP_SPIM0_RDY_PIN 25 // SPI READY GPIO pin number
126 #define SER_APP_SPIM0_REQ_PIN 24 // SPI REQUEST GPIO pin number
127 
128 // serialization CONNECTIVITY board
129 #define SER_CON_RX_PIN 24 // UART RX pin number.
130 #define SER_CON_TX_PIN 23 // UART TX pin number.
131 #define SER_CON_CTS_PIN 25 // UART Clear To Send pin number. Not used if HWFC is set to false.
132 #define SER_CON_RTS_PIN 2 // UART Request To Send pin number. Not used if HWFC is set to false.
133 
134 
135 #define SER_CON_SPIS_SCK_PIN 27 // SPI SCK signal.
136 #define SER_CON_SPIS_MOSI_PIN 2 // SPI MOSI signal.
137 #define SER_CON_SPIS_MISO_PIN 26 // SPI MISO signal.
138 #define SER_CON_SPIS_CSN_PIN 23 // SPI CSN signal.
139 #define SER_CON_SPIS_RDY_PIN 25 // SPI READY GPIO pin number.
140 #define SER_CON_SPIS_REQ_PIN 24 // SPI REQUEST GPIO pin number.
141 
142 #define SER_CONN_CHIP_RESET_PIN 11 // Pin used to reset connectivity chip
143 
144 // Arduino board mappings
145 #define ARDUINO_SCL_PIN 27 // SCL signal pin
146 #define ARDUINO_SDA_PIN 26 // SDA signal pin
147 #define ARDUINO_AREF_PIN 2 // Aref pin
148 #define ARDUINO_13_PIN 25 // Digital pin 13
149 #define ARDUINO_12_PIN 24 // Digital pin 12
150 #define ARDUINO_11_PIN 23 // Digital pin 11
151 #define ARDUINO_10_PIN 22 // Digital pin 10
152 #define ARDUINO_9_PIN 20 // Digital pin 9
153 #define ARDUINO_8_PIN 19 // Digital pin 8
154 
155 #define ARDUINO_7_PIN 18 // Digital pin 7
156 #define ARDUINO_6_PIN 17 // Digital pin 6
157 #define ARDUINO_5_PIN 16 // Digital pin 5
158 #define ARDUINO_4_PIN 15 // Digital pin 4
159 #define ARDUINO_3_PIN 14 // Digital pin 3
160 #define ARDUINO_2_PIN 13 // Digital pin 2
161 #define ARDUINO_1_PIN 12 // Digital pin 1
162 #define ARDUINO_0_PIN 11 // Digital pin 0
163 
164 #define ARDUINO_A0_PIN 3 // Analog channel 0
165 #define ARDUINO_A1_PIN 4 // Analog channel 1
166 #define ARDUINO_A2_PIN 28 // Analog channel 2
167 #define ARDUINO_A3_PIN 29 // Analog channel 3
168 #define ARDUINO_A4_PIN 30 // Analog channel 4
169 #define ARDUINO_A5_PIN 31 // Analog channel 5
170 
171 
172 #ifdef __cplusplus
173 }
174 #endif
175 
176 #endif // PCA10036_H
Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.