Data Structures
class	AdvertisingDataBuilder
	Build advertising data. More...

class	AdvertisingDataParser
	Parse and iterate over advertising data. More...

class	AdvertisingDataSimpleBuilder< DataSize >
	Build advertising data. More...

struct	adv_data_type_t

struct	adv_data_flags_t
	Set of advertising flags. More...

struct	adv_data_appearance_t
	Enumeration of values for the adv_data_type_t::APPEARANCE. More...

class	AdvertisingParameters
	Parameters defining the advertising process. More...

class	ConnectionParameters
	Parameters defining the connection initiation process. More...

struct	AdvertisingReportEvent
	Event generated when an advertising packet is seen during passive scanning or a scan response is received during active scanning. More...

struct	ConnectionCompleteEvent
	Event generated when a connection initiation ends (successfully or not). More...

struct	PeriodicAdvertisingSyncEstablishedEvent
	Event generated when you first receive a periodic advertisement. More...

struct	PeriodicAdvertisingReportEvent
	Event generated when periodic advertising packet is received. More...

struct	PeriodicAdvertisingSyncLoss
	Event generated when periodic advertising sync is lost. More...

struct	ScanTimeoutEvent
	Event generated when scan times out. More...

struct	AdvertisingEndEvent
	Event produced when advertising ends. More...

struct	ScanRequestEvent
	Event produced when a peer requests a scan response from the advertiser. More...

struct	DisconnectionCompleteEvent
	Event produced when a disconnection is complete. More...

struct	UpdateConnectionParametersRequestEvent
	Event received when a peer wants to change the connection parameters. More...

struct	ConnectionParametersUpdateCompleteEvent
	Event received when connection parameters have been updated. More...

class	Gap
	Define device discovery, connection and link management procedures. More...

class	ScanParameters
	Parameters defining the scan process. More...

struct	advertising_type_t
	Encapsulates the peripheral advertising modes. More...

struct	advertising_data_status_t
	Used to indicate if the packet is complete and if it's truncated. More...

struct	advertising_event_t
	Properties of an advertising event. More...

struct	advertising_filter_policy_t
	Advertising policy filter modes. More...

struct	scanning_filter_policy_t
	Scanning policy filter mode. More...

struct	initiator_filter_policy_t
	Filter policy that you can use during connection initiation. More...

struct	duplicates_filter_t
	Scanning policy filter mode. More...

struct	own_address_type_t
	Type used to model the own address used during the following GAP operations: advertising, scanning and initiating. More...

struct	target_peer_address_type_t
	Type of an address to connect to. More...

struct	clock_accuracy_t
	Accuracy of the master clock. More...

struct	connection_role_t
	Enumeration of GAP roles. More...

struct	local_disconnection_reason_t
	Enumeration of disconnection reasons that should be transmited to the peer. More...

struct	disconnection_reason_t
	Enumeration of disconnection reasons received in a disconnection event. More...

struct	peripheral_privacy_configuration_t
	Privacy Configuration of the peripheral role. More...

struct	central_privay_configuration_t
	Privacy configuration of the central role. More...

class	Gap
	Define device discovery, connection and link management procedures. More...

class	GapAdvertisingData
	GAP advertising data builder. More...

class	GapAdvertisingParams
	Parameters defining the advertising process. More...

class	GapScanningParams
	Parameters defining the scan process. More...

Typedefs
typedef Duration< uint32_t, 625, Range< 0x20, 0xFFFFFF > >	adv_interval_t
	Time interval between two advertisements. More...

typedef Duration< uint16_t, 10000, Range< 0x00, 0xFFFF >, Value< uint16_t, 0x0000 > >	adv_duration_t
	Advertising process duration. More...

typedef Duration< uint16_t, 10000, Range< 0x00, 0xFFFF >, Value< uint16_t, 0x0000 > >	scan_duration_t
	Scan process duration. More...

typedef Duration< uint16_t, 1280000, Range< 0x00, 0xFFFF > >	scan_period_t
	Time interval between two scan processes. More...

typedef Duration< uint16_t, 625, Range< 0x04, 0xFFFF > >	scan_interval_t
	Time interval between two scans. More...

typedef Duration< uint16_t, 625, Range< 0x04, 0xFFFF > >	scan_window_t
	Duration of a scan. More...

typedef Duration< uint16_t, 1250, Range< 0x06, 0x0C80 > >	conn_interval_t
	Time interval between two connection events. More...

typedef Duration< uint16_t, 10000, Range< 0x0A, 0x0C80 > >	supervision_timeout_t
	Time after which a connection is loss of devices have not exchanged data. More...

typedef Duration< uint16_t, 625, Range< 0, 0xFFFF > >	conn_event_length_t
	Duration of a connection event. More...

typedef Duration< uint16_t, 10000, Range< 0x0A, 0x4000 > >	sync_timeout_t
	Time after which a periodic sync link is considered lost if the receiver hasn't received anything from the advertiser. More...

typedef Duration< uint16_t, 1250, Range< 0x06, 0xFFFF > >	periodic_interval_t
	Interval between two periodic advertising events. More...

typedef Bounded< uint16_t, 0, 0x01F3 >	slave_latency_t
	Number of connection events that can be skipped by the slave. More...

typedef uint8_t	advertising_handle_t
	Handle of an advertising set. More...

typedef uint16_t	periodic_sync_handle_t
	Handle of a sync representing a periodic advertiser. More...

typedef uint8_t	advertising_sid_t
	Identify an advertising SID. More...

typedef int8_t	rssi_t
	Received signal strength. More...

typedef int8_t	advertising_power_t
	Describe the advertising power. More...

Detailed Description

Typedef Documentation

typedef Duration<uint16_t, 10000, Range<0x00, 0xFFFF>, Value<uint16_t, 0x0000> > adv_duration_t

Advertising process duration.

The duration is in unit of 10ms and ranges from 0x0001 to 0xFFFF. The special value 0x0000 means the advertising process never ends; it is accessible with adv_duration_t::forever().

Definition at line 51 of file Types.h.

typedef Duration<uint32_t, 625, Range<0x20, 0xFFFFFF> > adv_interval_t

Time interval between two advertisements.

The duration is in unit of 625µs and ranges from 0x20 to 0xFFFFFF .

Note: before Bluetooth 5 range was 0x20 to 0xFFFF.

Definition at line 42 of file Types.h.

typedef uint8_t advertising_handle_t

Handle of an advertising set.

Note: Range of valid handle is comprised between 0x00 and 0xEF.

Definition at line 134 of file Types.h.

typedef int8_t advertising_power_t

Describe the advertising power.

Values between -127 and +126 are considered power values in dBm while the special value 127 can be used as a wildcard to indicate that the host has no preference or if the power information is not available.

Definition at line 387 of file Types.h.

typedef uint8_t advertising_sid_t

Identify an advertising SID.

Range: [0x00, 0x0F]

Definition at line 374 of file Types.h.

typedef Duration<uint16_t, 625, Range<0, 0xFFFF> > conn_event_length_t

Duration of a connection event.

The duration is in unit of 625µs and ranges from 0x0 to 0xFFFF .

Definition at line 105 of file Types.h.

typedef Duration<uint16_t, 1250, Range<0x06, 0x0C80> > conn_interval_t

Time interval between two connection events.

The interval is in unit of 1.250 milliseconds and ranges from 0x06 to 0xC80.

Definition at line 89 of file Types.h.

typedef Duration<uint16_t, 1250, Range<0x06, 0xFFFF> > periodic_interval_t

Interval between two periodic advertising events.

The duration is in unit of 1.250ms and ranges from 0x06 to 0xFFFF.

Definition at line 120 of file Types.h.

typedef uint16_t periodic_sync_handle_t

Handle of a sync representing a periodic advertiser.

Note: Range of valid handle is comprised between 0x0000 and 0xFFFF.

Definition at line 141 of file Types.h.

typedef int8_t rssi_t

Received signal strength.

Range <-127, 20>.

Note: Special value 127 means RSSI is not available.

Definition at line 378 of file Types.h.

typedef Duration<uint16_t, 10000, Range<0x00, 0xFFFF>, Value<uint16_t, 0x0000> > scan_duration_t

Scan process duration.

The duration is in unit of 10ms and ranges from 0x0001 to 0xFFFF. The special value 0x0000 means the scan process never ends; it is accessible with scan_duration_t::forever().

Definition at line 60 of file Types.h.

typedef Duration<uint16_t, 625, Range<0x04, 0xFFFF> > scan_interval_t

Time interval between two scans.

The duration is in unit of 625µs and ranges from 0x04 to 0xFFFF.

Definition at line 75 of file Types.h.

typedef Duration<uint16_t, 1280000, Range<0x00, 0xFFFF> > scan_period_t

Time interval between two scan processes.

The duration is in unit of 1.28s and ranges from 0x0001 to 0xFFFF. The special value 0x0000 is used to indicate that scan_period_t is not used.

Definition at line 68 of file Types.h.

typedef Duration<uint16_t, 625, Range<0x04, 0xFFFF> > scan_window_t

Duration of a scan.

The duration is in unit of 625µs and ranges from 0x04 to 0xFFFF.

Definition at line 82 of file Types.h.

typedef Bounded<uint16_t, 0, 0x01F3> slave_latency_t

Number of connection events that can be skipped by the slave.

It ranges from 0 to 0x1F3.

Definition at line 127 of file Types.h.

typedef Duration<uint16_t, 10000, Range<0x0A, 0x0C80> > supervision_timeout_t

Time after which a connection is loss of devices have not exchanged data.

The duration is in unit of 10 milliseconds and ranges from 0x0A to 0xC80.

Note: this time should be no larger than (1 + ConnLatency) * ConnIntervalMax * 2

Definition at line 98 of file Types.h.

typedef Duration<uint16_t, 10000, Range<0x0A, 0x4000> > sync_timeout_t

Time after which a periodic sync link is considered lost if the receiver hasn't received anything from the advertiser.

The duration is in unit of 10 milliseconds and ranges from 0x0A to 0x4000.

Definition at line 113 of file Types.h.

Data Structures

Typedefs

Detailed Description

Typedef Documentation

Important Information for this Arm website