GattClient
Note: Some functions, variables or types have been deprecated. Please see the class reference linked below for details.
You can use Generic Attribute Profile (GATT) to discover services, characteristics and descriptors and to perform operations on them. The interaction happens between two peers, one of which is the client (which initiates interactions) and the other is the server (which responds). You can use Attribute Protocol (ATT) to implement this interaction. GattClient
defines procedures required for interacting with a remote GattServer
.
Discovery procedures
A GattServer hosts a fixed set of services. These services are a logical composition of characteristics that may be discovered, read or written and can broadcast their state to a connected client. These characteristics may also contain metainformation and named characteristic descriptors. A characteristic descriptor may indicate the unit used for a characteristic value, describe the characteristic purpose in a textual form or allow a client to register for update notifications for the characteristic value.
Prior to any interaction with a server characteristic, a GattClient discovers the layout of the services and characteristics present on the server.
The layout of the descriptors of a characteristic may also be issued as an extra discovery step.
Attribute manipulation
As a result of the discovery process, the client can start interacting with the characteristic discovered. Depending on the characteristic properties (acquired during discovery), a client can read or write the value of a given characteristic.
Mbed BLE abstracts read and write operations to offer a single API that can be used to read or write characteristic values. The application code does not have to handle the necessary fragmentation or reassembly process if the attribute value to be transported can't fit in a single data packet.
Attribute Protocol Maximum Transmission Unit (ATT_MTU)
ATT_MTU
is the maximum size of the attribute protocol packet. Operation on attributes too large to fit into a single packet are split across multiple operations.
This is independent of the data length, which controls the over-the-air packet payload size (which the GAP handles). An L2CAP packet containing the attribute protocol packet is fragmented over many packets if required.
Only GattClient
can trigger the exchange of ATT_MTU
between client and server. Depending on the implementation of the bluetooth stack, the client may trigger the exchange upon connection. You may also manually request the exchange using negotiateAttMtu
. If an exchange happens, the biggest value possible across both devices will be used. Negotiation is only a best-effort process and does not guarantee a higher value being set.
ATT_MTU
is at least 23 octets by default. If a larger size is negotiated, the user application will be informed through the onAttMtuChange
function called in the GattClient::EventHandler
. (GattServer::EventHandler
is also informed.)
Server initiated events
When a server updates a characteristic value, it can forward the new value to any registered clients. Clients may register for these updates on a per-characteristic basis. The server sends the updates by using notifications (no confirmation from client) or indications (client confirms receipt). This mechanism minimizes the number of transactions between a client and a server by avoiding polling.
Clients register for these updates by setting the Client Characteristic Configuration Descriptor (CCCD) value. This is an attribute, and the client needs to discover its descriptor. It is present in the characteristic if its notify or indicate properties are set.
GattClient class reference
Data Structures | |
struct | EventHandler |
Definition of the general handler of GattClient related events. More... |
Public Member Functions | |
void | setEventHandler (EventHandler *handler) |
Assign the event handler implementation that will be used by the module to signal events back to the application. More... | |
ble_error_t | launchServiceDiscovery (ble::connection_handle_t connectionHandle, ServiceDiscovery::ServiceCallback_t sc=nullptr, ServiceDiscovery::CharacteristicCallback_t cc=nullptr, const UUID &matchingServiceUUID=UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN), const UUID &matchingCharacteristicUUIDIn=UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN)) |
Launch the service and characteristic discovery procedure of a GATT server peer. More... | |
ble_error_t | discoverServices (ble::connection_handle_t connectionHandle, ServiceDiscovery::ServiceCallback_t callback, const UUID &matchingServiceUUID=UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN)) |
Launch the service discovery procedure of a GATT server peer. More... | |
ble_error_t | discoverServices (ble::connection_handle_t connectionHandle, ServiceDiscovery::ServiceCallback_t callback, GattAttribute::Handle_t startHandle, GattAttribute::Handle_t endHandle) |
Launch the service discovery procedure of a GATT server peer. More... | |
bool | isServiceDiscoveryActive () const |
Check if the service discovery procedure is currently active. More... | |
void | terminateServiceDiscovery () |
Terminate all ongoing service discovery procedures. More... | |
ble_error_t | read (ble::connection_handle_t connHandle, GattAttribute::Handle_t attributeHandle, uint16_t offset) const |
Initiate the read procedure of an attribute handle. More... | |
ble_error_t | write (GattClient::WriteOp_t cmd, ble::connection_handle_t connHandle, GattAttribute::Handle_t attributeHandle, size_t length, const uint8_t *value) const |
Initiate a write procedure on an attribute value. More... | |
void | onDataRead (ble::ReadCallback_t callback) |
Register an attribute read event handler. More... | |
ble::ReadCallbackChain_t & | onDataRead () |
Get the callchain of attribute read event handlers. More... | |
void | onDataWritten (ble::WriteCallback_t callback) |
Register an attribute write event handler. More... | |
ble::WriteCallbackChain_t & | onDataWritten () |
Get the callchain of attribute write event handlers. More... | |
void | onServiceDiscoveryTermination (ServiceDiscovery::TerminationCallback_t callback) |
Register a service discovery termination event handler. More... | |
ble_error_t | discoverCharacteristicDescriptors (const DiscoveredCharacteristic &characteristic, const CharacteristicDescriptorDiscovery::DiscoveryCallback_t &discoveryCallback, const CharacteristicDescriptorDiscovery::TerminationCallback_t &terminationCallback) |
Initiate the descriptor discovery procedure for a given characteristic. More... | |
bool | isCharacteristicDescriptorDiscoveryActive (const DiscoveredCharacteristic &characteristic) const |
Query status of the descriptor discovery procedure for a given characteristic. More... | |
void | terminateCharacteristicDescriptorDiscovery (const DiscoveredCharacteristic &characteristic) |
Terminate an ongoing characteristic descriptor discovery procedure. More... | |
ble_error_t | negotiateAttMtu (ble::connection_handle_t connection) |
Trigger MTU negotiation. More... | |
void | onHVX (HVXCallback_t callback) |
Register an handler for Handle Value Notification/Indication events. More... | |
void | onShutdown (const GattClientShutdownCallback_t &callback) |
Register a shutdown event handler. More... | |
template<typename T > | |
void | onShutdown (T *objPtr, void(T::*memberPtr)(const GattClient *)) |
Register a shutdown event handler. More... | |
GattClientShutdownCallbackChain_t & | onShutdown () |
Get the callchain of shutdown event handlers. More... | |
HVXCallbackChain_t & | onHVX () |
provide access to the callchain of HVX callbacks. More... | |
ble_error_t | reset () |
Reset the state of the GattClient instance. More... | |
void | processReadResponse (const GattReadCallbackParams *params) |
Forward an attribute read event to all registered handlers. More... | |
void | processWriteResponse (const GattWriteCallbackParams *params) |
Forward an attribute written event to all registered handlers. More... | |
void | processHVXEvent (const GattHVXCallbackParams *params) |
Forward a handle value notification or indication event to all registered handlers. More... |
GattClient examples
Characteristic writes
/* mbed Microcontroller Library
* Copyright (c) 2006-2015 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "events/mbed_events.h"
#include "ble/BLE.h"
#include "ble_app.h"
#include "mbed-trace/mbed_trace.h"
/* GATT server needs free functions */
void service_discovery(const DiscoveredService *service);
void characteristic_discovery(const DiscoveredCharacteristic *characteristic);
void discovery_termination(ble::connection_handle_t connectionHandle);
void on_read(const GattReadCallbackParams *response);
void on_write(const GattWriteCallbackParams *response);
class GattClientDemo : public ble::Gap::EventHandler {
const static uint16_t EXAMPLE_SERVICE_UUID = 0xA000;
const static uint16_t WRITABLE_CHARACTERISTIC_UUID = 0xA001;
friend void service_discovery(const DiscoveredService *service);
friend void characteristic_discovery(const DiscoveredCharacteristic *characteristic);
friend void discovery_termination(ble::connection_handle_t connectionHandle);
friend void on_read(const GattReadCallbackParams *response);
friend void on_write(const GattWriteCallbackParams *response);
public:
static GattClientDemo &get_instance() {
static GattClientDemo instance;
return instance;
}
void start() {
_ble_app.add_gap_event_handler(this);
_ble_app.set_target_name("GattServer");
/* once it's done it will let us continue with our demo by calling on_init */
_ble_app.start(callback(this, &GattClientDemo::on_init));
/* the above function does not return until we call _ble_app.stop() somewhere else */
}
private:
/** Callback triggered when the ble initialization process has finished */
void on_init(BLE &ble, events::EventQueue &event_queue) {
_ble = &ble;
_event_queue = &event_queue;
_ble->gattClient().onDataRead(::on_read);
_ble->gattClient().onDataWritten(::on_write);
}
void onConnectionComplete(const ble::ConnectionCompleteEvent &event) {
printf("We are looking for a service with UUID 0xA000\r\n");
printf("And a characteristic with UUID 0xA001\r\n");
_ble->gattClient().onServiceDiscoveryTermination(::discovery_termination);
_ble->gattClient().launchServiceDiscovery(
event.getConnectionHandle(),
::service_discovery,
::characteristic_discovery,
EXAMPLE_SERVICE_UUID,
WRITABLE_CHARACTERISTIC_UUID
);
}
private:
void service_discovery(const DiscoveredService *service) {
if (service->getUUID().shortOrLong() == UUID::UUID_TYPE_SHORT) {
if (service->getUUID().getShortUUID() == EXAMPLE_SERVICE_UUID) {
printf("We found the service we were looking for\r\n");
}
}
}
void characteristic_discovery(const DiscoveredCharacteristic *characteristic) {
if (characteristic->getUUID().getShortUUID() == WRITABLE_CHARACTERISTIC_UUID) {
printf("We found the characteristic we were looking for\r\n");
writable_characteristic = *characteristic;
writable_characteristic_found = true;
}
}
void discovery_termination(ble::connection_handle_t connectionHandle) {
if (writable_characteristic_found) {
writable_characteristic_found = false;
_event_queue->call([this]{ writable_characteristic.read(); });
}
}
void on_read(const GattReadCallbackParams *response) {
if (response->handle == writable_characteristic.getValueHandle()) {
/* increment the value we just read */
uint8_t value = response->data[0];
value++;
/* and write it back */
writable_characteristic.write(1, &value);
printf("Written new value of %x\r\n", value);
}
}
void on_write(const GattWriteCallbackParams *response) {
if (response->handle == writable_characteristic.getValueHandle()) {
/* this concludes the example, we stop the app running the ble process in the background */
_ble_app.stop();
}
}
private:
GattClientDemo() {};
~GattClientDemo() {};
private:
/** Simplified BLE application that automatically advertises and scans. It will
* initialise BLE and run the event queue */
BLEApp _ble_app;
BLE *_ble = nullptr;
events::EventQueue *_event_queue = nullptr;
DiscoveredCharacteristic writable_characteristic;
bool writable_characteristic_found = false;
};
/* redirect to demo instance functions */
void service_discovery(const DiscoveredService *service) {
GattClientDemo::get_instance().service_discovery(service);
}
void characteristic_discovery(const DiscoveredCharacteristic *characteristic) {
GattClientDemo::get_instance().characteristic_discovery(characteristic);
}
void discovery_termination(ble::connection_handle_t connectionHandle) {
GattClientDemo::get_instance().discovery_termination(connectionHandle);
}
void on_read(const GattReadCallbackParams *response) {
GattClientDemo::get_instance().on_read(response);
}
void on_write(const GattWriteCallbackParams *response) {
GattClientDemo::get_instance().on_write(response);
}
int main()
{
printf("\r\nGattClient demo of a writable characteristic\r\n");
mbed_trace_init();
GattClientDemo &demo = GattClientDemo::get_instance();
/* this demo will run and sleep for 5 seconds, during which time ble will be shut down */
while (1) {
demo.start();
printf("Sleeping...\r\n");
ThisThread::sleep_for(5s);
}
return 0;
}
Characteristic updates
/* mbed Microcontroller Library
* Copyright (c) 2006-2019 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "events/EventQueue.h"
#include "platform/NonCopyable.h"
#include "ble/GattClient.h"
#include "gatt_client_process.h"
#include "mbed-trace/mbed_trace.h"
/**
* Handle discovery of the GATT server.
*
* First the GATT server is discovered in its entirety then each readable
* characteristic is read and the client register to characteristic
* notifications or indication when available. The client report server
* indications and notification until the connection end.
*/
class GattClientDemo : private mbed::NonCopyable<GattClientDemo>, public GattClient::EventHandler
{
// Internal typedef to this class type.
// It is used as a shorthand to pass member function as callbacks.
typedef GattClientDemo Self;
typedef CharacteristicDescriptorDiscovery::DiscoveryCallbackParams_t DiscoveryCallbackParams_t;
typedef CharacteristicDescriptorDiscovery::TerminationCallbackParams_t TerminationCallbackParams_t;
typedef DiscoveredCharacteristic::Properties_t Properties_t;
public:
/**
* Construct an empty client process.
*
* The function start() shall be called to initiate the discovery process.
*/
GattClientDemo() { }
~GattClientDemo()
{
stop();
}
void start(BLE &ble, events::EventQueue &event_queue)
{
_ble = &ble;
_event_queue = &event_queue;
_client = &_ble->gattClient();
}
/**
* Start the discovery process.
*
* @param[in] client The GattClient instance which will discover the distant
* GATT server.
* @param[in] connection_handle Reference of the connection to the GATT
* server which will be discovered.
*/
void start_discovery(BLE &ble_interface, events::EventQueue &event_queue, const ble::ConnectionCompleteEvent &event)
{
_connection_handle = event.getConnectionHandle();
// setup the event handlers called during the process
_client->onDataWritten().add(as_cb(&Self::when_descriptor_written));
_client->onHVX().add(as_cb(&Self::when_characteristic_changed));
// The discovery process will invoke when_service_discovered when a
// service is discovered, when_characteristic_discovered when a
// characteristic is discovered and when_service_discovery_ends once the
// discovery process has ended.
_client->onServiceDiscoveryTermination(as_cb(&Self::when_service_discovery_ends));
ble_error_t error = _client->launchServiceDiscovery(
_connection_handle,
as_cb(&Self::when_service_discovered),
as_cb(&Self::when_characteristic_discovered)
);
if (error) {
printf("Error %u returned by _client->launchServiceDiscovery.\r\n", error);
return;
}
// register as a handler for GattClient events
_client->setEventHandler(this);
// this might not result in a new value but if it does we will be informed through
// an call in the event handler we just registered
_client->negotiateAttMtu(_connection_handle);
printf("Client process started: initiate service discovery.\r\n");
}
/**
* Stop the discovery process and clean the instance.
*/
void stop()
{
if (!_client) {
return;
}
// unregister event handlers
_client->onDataWritten().detach(as_cb(&Self::when_descriptor_written));
_client->onHVX().detach(as_cb(&Self::when_characteristic_changed));
_client->onServiceDiscoveryTermination(nullptr);
// remove discovered characteristics
clear_characteristics();
// clean up the instance
_connection_handle = 0;
_characteristics = nullptr;
_it = nullptr;
_descriptor_handle = 0;
printf("Client process stopped.\r\n");
}
private:
/**
* Implementation of GattClient::EventHandler::onAttMtuChange event
*/
virtual void onAttMtuChange(
ble::connection_handle_t connectionHandle,
uint16_t attMtuSize
)
{
printf(
"ATT_MTU changed on the connection %d to a new value of %d.\r\n",
connectionHandle,
attMtuSize
/* maximum size of an attribute written in a single operation is one less */
);
}
private:
////////////////////////////////////////////////////////////////////////////////
// Service and characteristic discovery process.
/**
* Handle services discovered.
*
* The GattClient invokes this function when a service has been discovered.
*
* @see GattClient::launchServiceDiscovery
*/
void when_service_discovered(const DiscoveredService *discovered_service)
{
// print information of the service discovered
printf("Service discovered: value = ");
print_uuid(discovered_service->getUUID());
printf(", start = %u, end = %u.\r\n",
discovered_service->getStartHandle(),
discovered_service->getEndHandle()
);
}
/**
* Handle characteristics discovered.
*
* The GattClient invoke this function when a characteristic has been
* discovered.
*
* @see GattClient::launchServiceDiscovery
*/
void when_characteristic_discovered(const DiscoveredCharacteristic *discovered_characteristic)
{
// print characteristics properties
printf("\tCharacteristic discovered: uuid = ");
print_uuid(discovered_characteristic->getUUID());
printf(", properties = ");
print_properties(discovered_characteristic->getProperties());
printf(
", decl handle = %u, value handle = %u, last handle = %u.\r\n",
discovered_characteristic->getDeclHandle(),
discovered_characteristic->getValueHandle(),
discovered_characteristic->getLastHandle()
);
// add the characteristic into the list of discovered characteristics
bool success = add_characteristic(discovered_characteristic);
if (!success) {
printf("Error: memory allocation failure while adding the discovered characteristic.\r\n");
_client->terminateServiceDiscovery();
stop();
return;
}
}
/**
* Handle termination of the service and characteristic discovery process.
*
* The GattClient invokes this function when the service and characteristic
* discovery process ends.
*
* @see GattClient::onServiceDiscoveryTermination
*/
void when_service_discovery_ends(ble::connection_handle_t connection_handle)
{
if (!_characteristics) {
printf("No characteristics discovered, end of the process.\r\n");
return;
}
printf("All services and characteristics discovered, process them.\r\n");
// reset iterator and start processing characteristics in order
_it = nullptr;
_event_queue->call(mbed::callback(this, &Self::process_next_characteristic));
}
////////////////////////////////////////////////////////////////////////////////
// Processing of characteristics based on their properties.
/**
* Process the characteristics discovered.
*
* - If the characteristic is readable then read its value and print it. Then
* - If the characteristic can emit notification or indication then discover
* the characteristic CCCD and subscribe to the server initiated event.
* - Otherwise skip the characteristic processing.
*/
void process_next_characteristic(void)
{
if (!_it) {
_it = _characteristics;
} else {
_it = _it->next;
}
while (_it) {
Properties_t properties = _it->value.getProperties();
if (properties.read()) {
read_characteristic(_it->value);
return;
} else if(properties.notify() || properties.indicate()) {
discover_descriptors(_it->value);
return;
} else {
printf(
"Skip processing of characteristic %u\r\n",
_it->value.getValueHandle()
);
_it = _it->next;
}
}
printf("All characteristics discovered have been processed.\r\n");
}
/**
* Initate the read of the characteristic in input.
*
* The completion of the operation will happens in when_characteristic_read()
*/
void read_characteristic(const DiscoveredCharacteristic &characteristic)
{
printf("Initiating read at %u.\r\n", characteristic.getValueHandle());
ble_error_t error = characteristic.read(0, as_cb(&Self::when_characteristic_read));
if (error) {
printf(
"Error: cannot initiate read at %u due to %u\r\n",
characteristic.getValueHandle(), error
);
stop();
}
}
/**
* Handle the reception of a read response.
*
* If the characteristic can emit notification or indication then start the
* discovery of the the characteristic descriptors then subscribe to the
* server initiated event by writing the CCCD discovered. Otherwise start
* the processing of the next characteristic discovered in the server.
*/
void when_characteristic_read(const GattReadCallbackParams *read_event)
{
printf("\tCharacteristic value at %u equal to: ", read_event->handle);
for (size_t i = 0; i < read_event->len; ++i) {
printf("0x%02X ", read_event->data[i]);
}
printf(".\r\n");
Properties_t properties = _it->value.getProperties();
if(properties.notify() || properties.indicate()) {
discover_descriptors(_it->value);
} else {
process_next_characteristic();
}
}
/**
* Initiate the discovery of the descriptors of the characteristic in input.
*
* When a descriptor is discovered, the function when_descriptor_discovered
* is invoked.
*/
void discover_descriptors(const DiscoveredCharacteristic &characteristic)
{
printf("Initiating descriptor discovery of %u.\r\n", characteristic.getValueHandle());
_descriptor_handle = 0;
ble_error_t error = characteristic.discoverDescriptors(
as_cb(&Self::when_descriptor_discovered),
as_cb(&Self::when_descriptor_discovery_ends)
);
if (error) {
printf(
"Error: cannot initiate discovery of %04X due to %u.\r\n",
characteristic.getValueHandle(), error
);
stop();
}
}
/**
* Handle the discovery of the characteristic descriptors.
*
* If the descriptor found is a CCCD then stop the discovery. Once the
* process has ended subscribe to server initiated events by writing the
* value of the CCCD.
*/
void when_descriptor_discovered(const DiscoveryCallbackParams_t* event)
{
printf("\tDescriptor discovered at %u, UUID: ", event->descriptor.getAttributeHandle());
print_uuid(event->descriptor.getUUID());
printf(".\r\n");
if (event->descriptor.getUUID() == BLE_UUID_DESCRIPTOR_CLIENT_CHAR_CONFIG) {
_descriptor_handle = event->descriptor.getAttributeHandle();
_client->terminateCharacteristicDescriptorDiscovery(
event->characteristic
);
}
}
/**
* If a CCCD has been found subscribe to server initiated events by writing
* its value.
*/
void when_descriptor_discovery_ends(const TerminationCallbackParams_t *event)
{
// shall never happen but happen with android devices ...
// process the next charateristic
if (!_descriptor_handle) {
printf("\tWarning: characteristic with notify or indicate attribute without CCCD.\r\n");
process_next_characteristic();
return;
}
Properties_t properties = _it->value.getProperties();
uint16_t cccd_value =
(properties.notify() << 0) | (properties.indicate() << 1);
ble_error_t error = _client->write(
GattClient::GATT_OP_WRITE_REQ,
_connection_handle,
_descriptor_handle,
sizeof(cccd_value),
reinterpret_cast<uint8_t*>(&cccd_value)
);
if (error) {
printf(
"Error: cannot initiate write of CCCD %u due to %u.\r\n",
_descriptor_handle, error
);
stop();
}
}
/**
* Called when the CCCD has been written.
*/
void when_descriptor_written(const GattWriteCallbackParams* event)
{
// should never happen
if (!_descriptor_handle) {
printf("\tError: received write response to unsolicited request.\r\n");
stop();
return;
}
printf("\tCCCD at %u written.\r\n", _descriptor_handle);
_descriptor_handle = 0;
process_next_characteristic();
}
/**
* Print the updated value of the characteristic.
*
* This function is called when the server emits a notification or an
* indication of a characteristic value the client has subscribed to.
*
* @see GattClient::onHVX()
*/
void when_characteristic_changed(const GattHVXCallbackParams* event)
{
printf("Change on attribute %u: new value = ", event->handle);
for (size_t i = 0; i < event->len; ++i) {
printf("0x%02X ", event->data[i]);
}
printf(".\r\n");
}
struct DiscoveredCharacteristicNode {
DiscoveredCharacteristicNode(const DiscoveredCharacteristic &c) :
value(c), next(nullptr) { }
DiscoveredCharacteristic value;
DiscoveredCharacteristicNode *next;
};
/**
* Add a discovered characteristic into the list of discovered characteristics.
*/
bool add_characteristic(const DiscoveredCharacteristic *characteristic)
{
DiscoveredCharacteristicNode* new_node =
new(std::nothrow) DiscoveredCharacteristicNode(*characteristic);
if (new_node == nullptr) {
printf("Error while allocating a new characteristic.\r\n");
return false;
}
if (_characteristics == nullptr) {
_characteristics = new_node;
} else {
DiscoveredCharacteristicNode* c = _characteristics;
while(c->next) {
c = c->next;
}
c->next = new_node;
}
return true;
}
/**
* Clear the list of discovered characteristics.
*/
void clear_characteristics(void)
{
DiscoveredCharacteristicNode *c= _characteristics;
while (c) {
DiscoveredCharacteristicNode *n = c->next;
delete c;
c = n;
}
}
/**
* Helper to construct an event handler from a member function of this
* instance.
*/
template<typename ContextType>
FunctionPointerWithContext<ContextType> as_cb(void (Self::*member)(ContextType context))
{
return makeFunctionPointer(this, member);
}
/**
* Print the value of a UUID.
*/
static void print_uuid(const UUID &uuid)
{
const uint8_t *uuid_value = uuid.getBaseUUID();
// UUIDs are in little endian, print them in big endian
for (size_t i = 0; i < uuid.getLen(); ++i) {
printf("%02X", uuid_value[(uuid.getLen() - 1) - i]);
}
}
/**
* Print the value of a characteristic properties.
*/
static void print_properties(const Properties_t &properties)
{
const struct {
bool (Properties_t::*fn)() const;
const char* str;
} prop_to_str[] = {
{ &Properties_t::broadcast, "broadcast" },
{ &Properties_t::read, "read" },
{ &Properties_t::writeWoResp, "writeWoResp" },
{ &Properties_t::write, "write" },
{ &Properties_t::notify, "notify" },
{ &Properties_t::indicate, "indicate" },
{ &Properties_t::authSignedWrite, "authSignedWrite" }
};
printf("[");
for (size_t i = 0; i < (sizeof(prop_to_str) / sizeof(prop_to_str[0])); ++i) {
if ((properties.*(prop_to_str[i].fn))()) {
printf(" %s", prop_to_str[i].str);
}
}
printf(" ]");
}
private:
BLE *_ble = nullptr;
events::EventQueue *_event_queue = nullptr;
GattClient *_client = nullptr;
ble::connection_handle_t _connection_handle = 0;
DiscoveredCharacteristicNode *_characteristics = nullptr;
DiscoveredCharacteristicNode *_it = nullptr;
GattAttribute::Handle_t _descriptor_handle = 0;
};
int main()
{
mbed_trace_init();
BLE &ble = BLE::Instance();
events::EventQueue event_queue;
GattClientDemo demo;
/* this process will handle basic ble setup and advertising for us */
GattClientProcess ble_process(event_queue, ble);
/* once it's done it will let us continue with our demo */
ble_process.on_init(mbed::callback(&demo, &GattClientDemo::start));
ble_process.on_connect(mbed::callback(&demo, &GattClientDemo::start_discovery));
ble_process.start();
return 0;
}