Defined behavior

More...

Modules
	GPIO IRQ HAL tests
	The Pwmout HAL tests ensure driver conformance to defined behaviour.

Functions
void	pwmout_init_direct (pwmout_t obj, const PinMap pinmap)
	Initialize the pwm out peripheral and configure the pin. More...

void	pwmout_init (pwmout_t *obj, PinName pin)
	Initialize the pwm out peripheral and configure the pin. More...

void	pwmout_free (pwmout_t *obj)
	Deinitialize the pwmout object. More...

void	pwmout_write (pwmout_t *obj, float percent)
	Set the output duty-cycle in range <0.0f, 1.0f> More...

float	pwmout_read (pwmout_t *obj)
	Read the current float-point output duty-cycle. More...

void	pwmout_period (pwmout_t *obj, float seconds)
	Set the PWM period specified in seconds, keeping the duty cycle the same. More...

void	pwmout_period_ms (pwmout_t *obj, int ms)
	Set the PWM period specified in miliseconds, keeping the duty cycle the same. More...

void	pwmout_period_us (pwmout_t *obj, int us)
	Set the PWM period specified in microseconds, keeping the duty cycle the same. More...

void	pwmout_pulsewidth (pwmout_t *obj, float seconds)
	Set the PWM pulsewidth specified in seconds, keeping the period the same. More...

void	pwmout_pulsewidth_ms (pwmout_t *obj, int ms)
	Set the PWM pulsewidth specified in miliseconds, keeping the period the same. More...

void	pwmout_pulsewidth_us (pwmout_t *obj, int us)
	Set the PWM pulsewidth specified in microseconds, keeping the period the same. More...

const PinMap *	pwmout_pinmap (void)
	Get the pins that support PWM. More...

Detailed Description

Defined behavior

pwmout_init initializes the pwmout_t control structure
pwmout_free deinitializes the pwmout object
pwmout_write sets the output duty-cycle in range <0.0f, 1.0f>
pwmout_read returns the current float-point output duty-cycle in range <0.0f, 1.0f>
pwmout_period sets the PWM period specified in seconds, keeping the duty cycle the same
pwmout_period_ms sets the PWM period specified in miliseconds, keeping the duty cycle the same
pwmout_period_us sets the PWM period specified in microseconds, keeping the duty cycle the same
pwmout_pulsewidth sets the PWM pulsewidth specified in seconds, keeping the period the same
pwmout_pulsewidth_ms sets the PWM pulsewidth specified in miliseconds, keeping the period the same
pwmout_pulsewidth_us sets the PWM pulsewidth specified in microseconds, keeping the period the same
The accuracy of the PWM is +/- 10%
The PWM operations pwmout_write, pwmout_read, pwmout_read, pwmout_period_ms, pwmout_period_us pwmout_pulsewidth, pwmout_pulsewidth_ms, pwmout_pulsewidth_us take less than 20us to complete

Undefined behavior

Calling other function before pwmout_init
Calling pwmout_init with NC as pwmout pin

Function Documentation

void pwmout_free ( pwmout_t * obj )

Deinitialize the pwmout object.

Parameters

obj	The pwmout object

void pwmout_init	(	pwmout_t *	obj,
		PinName	pin
	)

Initialize the pwm out peripheral and configure the pin.

Parameters

obj	The pwmout object to initialize
pin	The pwmout pin to initialize

void pwmout_init_direct	(	pwmout_t *	obj,
		const PinMap *	pinmap
	)

Initialize the pwm out peripheral and configure the pin.

Parameters

obj	The pwmout object to initialize
pinmap	pointer to structure which holds static pinmap

void pwmout_period	(	pwmout_t *	obj,
		float	seconds
	)

Set the PWM period specified in seconds, keeping the duty cycle the same.

Periods smaller than microseconds (the lowest resolution) are set to zero.

Parameters

obj	The pwmout object
seconds	The floating-point seconds period

void pwmout_period_ms	(	pwmout_t *	obj,
		int	ms
	)

Set the PWM period specified in miliseconds, keeping the duty cycle the same.

Parameters

obj	The pwmout object
ms	The milisecond period

void pwmout_period_us	(	pwmout_t *	obj,
		int	us
	)

Set the PWM period specified in microseconds, keeping the duty cycle the same.

Parameters

obj	The pwmout object
us	The microsecond period

const PinMap* pwmout_pinmap ( void )

Get the pins that support PWM.

Return a PinMap array of pins that support PWM. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

void pwmout_pulsewidth	(	pwmout_t *	obj,
		float	seconds
	)

Set the PWM pulsewidth specified in seconds, keeping the period the same.

Parameters

obj	The pwmout object
seconds	The floating-point pulsewidth in seconds

void pwmout_pulsewidth_ms	(	pwmout_t *	obj,
		int	ms
	)

Set the PWM pulsewidth specified in miliseconds, keeping the period the same.

Parameters

obj	The pwmout object
ms	The floating-point pulsewidth in miliseconds

void pwmout_pulsewidth_us	(	pwmout_t *	obj,
		int	us
	)

Set the PWM pulsewidth specified in microseconds, keeping the period the same.

Parameters

obj	The pwmout object
us	The floating-point pulsewidth in microseconds

float pwmout_read ( pwmout_t * obj )

Read the current float-point output duty-cycle.

Parameters

obj	The pwmout object

Returns: A floating-point output duty-cycle

void pwmout_write	(	pwmout_t *	obj,
		float	percent
	)

Set the output duty-cycle in range <0.0f, 1.0f>

Value 0.0f represents 0 percentage, 1.0f represents 100 percent.

Parameters

obj	The pwmout object
percent	The floating-point percentage number

Defined behavior

Modules

Functions

Detailed Description

Defined behavior

Undefined behavior

Function Documentation

Important Information for this Arm website