eclipse for building and debugging
Outdated tutorial
See our new docs on exporting to Eclipse - https://os.mbed.com/docs/latest/tutorials/eclipse.html
I first want to thank for the e-mail that he sent me a few months ago. It forms the core of this documentation. David, You Rock!
Install GCC4MBED Project¶
Refer to the following link to install GCC4MBED on your machine: https://github.com/adamgreen/gcc4mbed#quick-start
Update mbed Firmware¶
Download http://mbed.org/media/uploads/simon/mbedmicrocontroller_21164.if. Copy this file to your mbed device and then power cycle it. This will update the firmware on the interface chip so that the debug monitor can be used for debugging the device.
Install Eclipse with C/C++ and GNU Support¶
To get started, you need to install Eclipse. To this you will add support for the GNU tool chain used by the GCC4MBED project. At the time this document was written, Eclipse 4.2 (Juno), was the current release.
- Eclipse is a Java application and requires at least version 6 of the Java Runtime Environment, JRE, be installed on your machine. On Windows and Linux, you will want to make sure that you have this Java requirement installed. On OS X, it will detect the Java requirement when you first attempt to run Eclipse and offer to install it for you if not already installed.
- Go to http://www.eclipse.org/downloads to download and decompress the Eclipse IDE for C/C++ Developers archive.
- Now startup that shiny new version of Eclipse by executing the Eclipse binary at the root of the decompressed Eclipse files. There is no separate install process required for Eclipse. If Eclipse fails to start, it is probably due to a missing JRE.
- On initial startup, it will ask where you want your workspace to be located. Accept the default and check the item to always use this as the default and not ask on every startup.
- On the Help menu, select the Install New Software... option.
- On the install dialog, press the Add... button near the upper right hand corner.
- Set Name: to Eclipse for ARM.
- Set Location: to http://sourceforge.net/projects/gnuarmeclipse/files/Eclipse/updates/
- Click the Ok button.
- There should now be a CDT GNU Cross Development Tools item listed on the Install dialog. It may take several seconds to populate this item into the list. Once it appears, check it.
- Now press the Next button.
- At this point an install wizard appears. You can just keep clicking through this wizard to allow it to progress.
- At some point it will complain about unsigned content. Ignore this warning by pressing the Ok button.
- At the end of the install wizard, press the Restart Now button.
Create Eclipse Project for GCC4MBED Sample¶
Now let's go through the steps to take an existing GCC4MBED sample, FileTest, and get it to build from within Eclipse. We will create 3 configurations which expose the 3 main build types supported by GCC4MBED's existing makefile: Debug, Checked, and Release. The first two configurations will actually produce builds that we can run under the debugger in Eclipse! Yeah!
- If this is the first time you are running Eclipse, you may be at the Welcome screen. You need to enter the Workbench by clicking its associated icon (arrow icon pointing into the screen.)
- On the File menu select New > Makefile Project with Existing Code
- You are now presented with the New Project dialog.
- Set Existing Code Location to the directory where the GCC4MBED FileTest sample is located on your machine. On my machine this is /depots/gcc4mbed/samples/FileTest but for you it will depend on your Operating System, OS, and to where you extracted the GCC4MBED project.
- If the Project Name field wasn't automatically filled in with FileTest then set it to that manually.
- You now need to select an appropriate toolchain from the Toolchain for Indexer Settings list. Even though we are using the GNUARM toolchain, we will select the Sourcery G++ Lite one because it uses the tool names which most closely match what we desire. Select the list item based on your operating system:
- Windows: ARM Windows GCC (Sourcery G++ Lite)
- Linux: ARM Linux GCC (Sourcery G++ Lite)
- OS X: ARM Mac OS X GCC (Sourcery G++ Lite)
- Click the Finish button.
You now have a FileTest project in the left pane, Project Explorer. We will start by creating a Debug build configuration that can build an unoptimized build of the FileTest sample.
- Right-click on the File Test project in the Project Explorer pane.
- Select Properties from the pop-up menu. This will bring up the Properties for FileTest dialog.
- In the left pane, select the C/C++ Build item.
- Click the Manage Configurations... button towards the upper right hand corner of the dialog. This will pop up the FileTest: Manage Configurations dialog.
- Click the New... button.
- Set Name: to Debug
- You should be able to accept the default of Copy settings from > Existing configuration > Default.
- Click the Ok button to return to the manage configurations dialog.
- Select Debug configuration from the list at the top of the small configurations dialog and then press the Set Active dialog.
- Select Default configuration from the same list and then press the Delete button.
- Press Yes to confirm the deletion of the default configuration.
- Click the Ok button to return to the properties dialog.
- Select the Behaviour sub-tab in the properties dialog.
- Change Build (Incremental Build) from all to all deploy GCC4MBED_TYPE=Debug
- Click the arrow to left of the C/C++ Build item in the left pane to expand its sub-items.
- Select the Environment sub-item.
- Click the Add... button on the environment properties dialog.
- Set Name: to PATH
- Set Value: to ${ProjDirPath}/../../gcc-arm-none-eabi/bin
- Click the Ok button to return to the environment properties dialog.
- Click the Add... button again.
- Set Name: to LPC_DEPLOY
- The string you use for Value: will depend on what commands are required to copy binaries to the mbed device in your environment. Here are some examples that I use on various operating systems that I test with (please note that the GCC4MBED build system will automatically replace the PROJECT string with the name of your project, FileTest in this case):
- OS X: cp PROJECT.bin /Volumes/MBED/ ; sync
- Linux: cp PROJECT.bin /media/MBED/ ; sync
- Windows: copy PROJECT.bin e:\
- Click the Ok button to return to environment properties dialog.
- At this point you can click on the Ok button on the Properties for FileTest dialog.
Let's now do a clean debug build of the FileTest sample in the Eclipse IDE.
- Right-click on the File Test project in the Project Explorer pane.
- Select Clean Project from the pop-up menu.
- In the bottom pane, select the Console tab. It should contain output similar to:
17:15:41 **** Clean-only build of configuration Debug for project FileTest **** make clean Cleaning up all build generated files 17:15:41 Build Finished (took 320ms)
- Right-click on the File Test project in the Project Explorer pane.
- Select Build Project from the pop-up menu.
- In the bottom pane, select the Console tab if not already selected. It should contain output similar to:
17:53:03 **** Build of configuration Debug for project FileTest **** make all deploy GCC4MBED_TYPE=Debug Compiling main.cpp Compiling ../../src/gcc4mbed.c Linking FileTest.elf Extracting FileTest.hex Extracting FileTest.bin Extracting disassembly to LPC176x/FileTest.disasm text data bss dec hex filename 48328 368 1452 50148 c3e4 FileTest.elf Deploying to target. 17:53:05 Build Finished (took 2s.291ms)
We can now use the Debug build configuration as the basis for the Checked and Release configurations. Both of these new configurations has compiler optimizations turned on but the Checked build is still enabled for debugging under Eclipse. You can build Release binaries with Eclipse and deploy them to your mbed but you can't run them under the debugger. It should also be noted that Debug and Checked builds will always hang when they first start, waiting for the debugger to be attached and setup initial breakpoints, etc.
- Right-click on the File Test project in the Project Explorer pane.
- Select Properties from the pop-up menu. This will bring up the Properties for FileTest dialog.
- In the left pane, select the C/C++ Build item.
- Click the Manage Configurations... button towards the upper right hand corner of the dialog. This will pop up the FileTest: Manage Configurations dialog.
- Click the New... button.
- Set Name: to Checked
- You should be able to accept the default of Copy settings from > Existing configuration > Debug.
- Click the Ok button to return to the manage configurations dialog.
- Click the New... button.
- Set Name: to Release
- You should be able to accept the default of Copy settings from > Existing configuration > Debug.
- Click the Ok button to return to the manage configurations dialog again.
- Click the Ok button to return to the properties dialog.
- At the top of the properties dialog set Configuration: to Checked
- Select the Behaviour sub-tab in the properties dialog.
- Change Build (Incremental Build) from all deploy GCC4MBED_TYPE=Debug to all deploy GCC4MBED_TYPE=Checked
- Click the Apply button.
- At the top of the properties dialog set Configuration: to Release
- Select the Behaviour sub-tab in the properties dialog.
- Change Build (Incremental Build) from all deploy GCC4MBED_TYPE=Debug to all deploy GCC4MBED_TYPE=Release
- Click the Ok button to save and dismiss the Properties for FileTest dialog.
Run FileTest sample under Debugger¶
Now comes the really fun part. Not only can we build our GCC4MBED samples in Eclipse, we can also run them under its debugger UI.
- Right-click on the File Test project in the Project Explorer pane.
- Select Debug as > Debug Configurations... from the pop-up menu. This will bring up the Debug Configurations dialog.
- In the left pane, right-click the C/C++ Remote Application item and select the New item from the pop-up menu. This will create us a new remote debugging configuration.
- At the bottom of this dialog, there is a link named Select other.... Click it to pop up the Select Preferred Launcher dialog.
- Check the Use configuration specific settings check-box.
- Select the GDB (DSF) Manual Remote Debugging Lancher.
- Click Ok to return to the debug configurations dialog.
- Set C/C++ Application: to FileTest.elf
- Select the Disable auto build option.
- Click on the Debugger tab.
- Change GDB debugger: from gdb to arm-none-eabi-gdb
- Click on the Connection sub-tab.
- Set Type: to Serial
- Set Device: to a value appropriate for your environment. You can learn more about determining your serial port here.
- Click on the Common tab.
- In the Display in favorites menu, check the Debug option.
- Click the Close button to dismiss the Debug Configurations
Now that we have the debug configuration setup, we are ready to try running FileTest under the debugger.
- Reset your device to make sure that the debug build we did earlier is up and running on your device.
- In the toolbar at the top of Eclipse, there is a button that looks like a bug which has a small down pointing arrow to its right. Click the arrow with your mouse and select the FileTest Debug configuration that we just created.
- You should now be in the debugger at the top of the main() function.
Eliminate Indexer Errors¶
It is typical to see clean build results with no errors but yet Eclipse complains about unresolved references ,etc. in the Problems tab at the bottom of Eclipse. These can typically be silenced by giving the Indexer a few more include paths.
- Right-click on the File Test project in the Project Explorer pane.
- Select Properties from the pop-up menu. This will bring up the Properties for FileTest dialog.
- Click arrow to left of C/C++ General item in left pane to expand its sub-items.
- Select the Paths and Symbols sub-item.
- Click the Add.. button. This will pop-up the Add directory path dialog.
- Set Directory: to ${ProjDirPath}/../../external/mbed/LPC1768
- Check both Add to all configurations and Add to all languages.
- Click the Ok button.
- Add another directory and set it to ${ProjDirPath}/../../external/mbed using the same steps as before.
- Click the Ok button to save and dismiss the Properties for FileTest dialog.
- Right-click on the File Test project in the Project Explorer pane.
- Select Index > Rebuild from the pop-up menu. This will re-index the files and hopefully find all of the necessary include files.
Note: If you get Indexer errors and can't figure out what might be missing from the include path, you can right click on your project and select the Index > Search for Unresolved Includes option to see what headers it couldn't find.
Additional notes for Windows users¶
- The PATH variable mentioned in the Create Eclipse Project for GCC4MBED Sample topic needs to be modified. We need to replace each slash (/) with a backslash (\), so set Value: to ${ProjDirPath}\..\..\gcc-arm-none-eabi\bin. Other fields accept both characters (/ and \). Also note that most output will show a /, this is not an error.
- When the Clean Project in Eclipse complains about not finding cs-make.exe, goto <gcc4mbed_folder>\external\win32 and check if cs-make.exe is present. If only make.exe exists, rename it to cs-make.exe (replace <gcc4mbed_folder> with the real gcc4mbed folder location). If cs-make.exe is still not found, add ${ProjDirPath}\..\..\external\win32 to the PATH variable in Properties > C/C++ Build > Environment.
- It is also good practice to set the Java path in Eclipse (see the Eclipse readme on your computer : eclipse\readme\readme_eclipse.html). We have two options: Create and modify a windows shortcut (search for Specifying the Java virtual machine in the readme file). Example: D:\eclipse\eclipse.exe -vm "C:\Program Files\Java\jdk1.7.0_13\jre\bin\javaw"
-OR-
modify the eclipse.ini file (search for eclipse.ini in the readme file). Add following lines before the -vmargs item (Note: As these are examples, don't forget to modify the path so it points to the folder where you installed Java and Eclipse)
-vm C:\Program Files\Java\jdk1.7.0_13\jre\bin\javaw
- By default, Eclipse does not autosave modified files upon building a project. You need to save the modified files before you build a project, otherwise, the changes will not be taken into the new build
-OR-
you can enable the autosave option in Window > Preferences > General > Workspace.
Thanks¶
Thanks again to David Cabanis for his help. Also thanks to the Smoothie users that helped me with Eclipse and testing.