mbed library sources

Fork of mbed-src by mbed official

Revision:
10:3bc89ef62ce7
Parent:
9:0ce32e54c9a7
Child:
13:0645d8841f51
diff -r 0ce32e54c9a7 -r 3bc89ef62ce7 api/I2C.h
--- a/api/I2C.h	Mon Jun 10 16:03:00 2013 +0100
+++ b/api/I2C.h	Fri Jun 14 17:49:17 2013 +0100
@@ -1,144 +1,144 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_I2C_H
-#define MBED_I2C_H
-
-#include "platform.h"
-
-#if DEVICE_I2C
-
-#include "i2c_api.h"
-
-namespace mbed {
-
-/** An I2C Master, used for communicating with I2C slave devices
- *
- * Example:
- * @code
- * // Read from I2C slave at address 0x62
- *
- * #include "mbed.h"
- *
- * I2C i2c(p28, p27);
- *
- * int main() {
- *     int address = 0x62;
- *     char data[2];
- *     i2c.read(address, data, 2);
- * }
- * @endcode
- */
-class I2C {
-
-public:
-    enum RxStatus {
-        NoData,
-        MasterGeneralCall,
-        MasterWrite,
-        MasterRead
-    };
-
-    enum Acknowledge {
-        NoACK = 0,
-        ACK   = 1
-    };
-
-    /** Create an I2C Master interface, connected to the specified pins
-     *
-     *  @param sda I2C data line pin
-     *  @param scl I2C clock line pin
-     */
-    I2C(PinName sda, PinName scl);
-
-    /** Set the frequency of the I2C interface
-     *
-     *  @param hz The bus frequency in hertz
-     */
-    void frequency(int hz);
-
-    /** Read from an I2C slave
-     *
-     * Performs a complete read transaction. The bottom bit of
-     * the address is forced to 1 to indicate a read.
-     *
-     *  @param address 8-bit I2C slave address [ addr | 1 ]
-     *  @param data Pointer to the byte-array to read data in to
-     *  @param length Number of bytes to read
-     *  @param repeated Repeated start, true - don't send stop at end
-     *
-     *  @returns
-     *       0 on success (ack),
-     *   non-0 on failure (nack)
-     */
-    int read(int address, char *data, int length, bool repeated = false);
-
-    /** Read a single byte from the I2C bus
-     *
-     *  @param ack indicates if the byte is to be acknowledged (1 = acknowledge)
-     *
-     *  @returns
-     *    the byte read
-     */
-    int read(int ack);
-
-    /** Write to an I2C slave
-     *
-     * Performs a complete write transaction. The bottom bit of
-     * the address is forced to 0 to indicate a write.
-     *
-     *  @param address 8-bit I2C slave address [ addr | 0 ]
-     *  @param data Pointer to the byte-array data to send
-     *  @param length Number of bytes to send
-     *  @param repeated Repeated start, true - do not send stop at end
-     *
-     *  @returns
-     *       0 on success (ack),
-     *   non-0 on failure (nack)
-     */
-    int write(int address, const char *data, int length, bool repeated = false);
-
-    /** Write single byte out on the I2C bus
-     *
-     *  @param data data to write out on bus
-     *
-     *  @returns
-     *    '1' if an ACK was received,
-     *    '0' otherwise
-     */
-    int write(int data);
-
-    /** Creates a start condition on the I2C bus
-     */
-
-    void start(void);
-
-    /** Creates a stop condition on the I2C bus
-     */
-    void stop(void);
-
-protected:
-    void aquire();
-
-    i2c_t _i2c;
-    static I2C  *_owner;
-    int         _hz;
-};
-
-} // namespace mbed
-
-#endif
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_H
+#define MBED_I2C_H
+
+#include "platform.h"
+
+#if DEVICE_I2C
+
+#include "i2c_api.h"
+
+namespace mbed {
+
+/** An I2C Master, used for communicating with I2C slave devices
+ *
+ * Example:
+ * @code
+ * // Read from I2C slave at address 0x62
+ *
+ * #include "mbed.h"
+ *
+ * I2C i2c(p28, p27);
+ *
+ * int main() {
+ *     int address = 0x62;
+ *     char data[2];
+ *     i2c.read(address, data, 2);
+ * }
+ * @endcode
+ */
+class I2C {
+
+public:
+    enum RxStatus {
+        NoData,
+        MasterGeneralCall,
+        MasterWrite,
+        MasterRead
+    };
+
+    enum Acknowledge {
+        NoACK = 0,
+        ACK   = 1
+    };
+
+    /** Create an I2C Master interface, connected to the specified pins
+     *
+     *  @param sda I2C data line pin
+     *  @param scl I2C clock line pin
+     */
+    I2C(PinName sda, PinName scl);
+
+    /** Set the frequency of the I2C interface
+     *
+     *  @param hz The bus frequency in hertz
+     */
+    void frequency(int hz);
+
+    /** Read from an I2C slave
+     *
+     * Performs a complete read transaction. The bottom bit of
+     * the address is forced to 1 to indicate a read.
+     *
+     *  @param address 8-bit I2C slave address [ addr | 1 ]
+     *  @param data Pointer to the byte-array to read data in to
+     *  @param length Number of bytes to read
+     *  @param repeated Repeated start, true - don't send stop at end
+     *
+     *  @returns
+     *       0 on success (ack),
+     *   non-0 on failure (nack)
+     */
+    int read(int address, char *data, int length, bool repeated = false);
+
+    /** Read a single byte from the I2C bus
+     *
+     *  @param ack indicates if the byte is to be acknowledged (1 = acknowledge)
+     *
+     *  @returns
+     *    the byte read
+     */
+    int read(int ack);
+
+    /** Write to an I2C slave
+     *
+     * Performs a complete write transaction. The bottom bit of
+     * the address is forced to 0 to indicate a write.
+     *
+     *  @param address 8-bit I2C slave address [ addr | 0 ]
+     *  @param data Pointer to the byte-array data to send
+     *  @param length Number of bytes to send
+     *  @param repeated Repeated start, true - do not send stop at end
+     *
+     *  @returns
+     *       0 on success (ack),
+     *   non-0 on failure (nack)
+     */
+    int write(int address, const char *data, int length, bool repeated = false);
+
+    /** Write single byte out on the I2C bus
+     *
+     *  @param data data to write out on bus
+     *
+     *  @returns
+     *    '1' if an ACK was received,
+     *    '0' otherwise
+     */
+    int write(int data);
+
+    /** Creates a start condition on the I2C bus
+     */
+
+    void start(void);
+
+    /** Creates a stop condition on the I2C bus
+     */
+    void stop(void);
+
+protected:
+    void aquire();
+
+    i2c_t _i2c;
+    static I2C  *_owner;
+    int         _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif