雄介 太田
mbed(SerialHalfDuplex入り)
Fork of
mbed
by 
mbed official
Revision 31:a7ef757f598c, committed 2012-01-06
- Comitter:
- emilmont
- Date:
- Fri Jan 06 12:02:19 2012 +0000
- Parent:
- 30:3991a86798e3
- Child:
- 32:3b05dd009342
- Commit message:
- [06 January 2012] Minor fixes
Changed in this revision
Binary file LPC11U24/ARM/capi.ar has changed
Binary file LPC11U24/ARM/cmsis_nvic.o has changed
--- a/LPC11U24/ARM/core_cm0.h Wed Jan 04 16:29:47 2012 +0000
+++ b/LPC11U24/ARM/core_cm0.h Fri Jan 06 12:02:19 2012 +0000
@@ -1,16 +1,16 @@
/**************************************************************************//**
* @file core_cm0.h
* @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
- * @version V2.03
- * @date 23. May 2011
+ * @version V3.00
+ * @date 09. December 2011
*
* @note
* Copyright (C) 2009-2011 ARM Limited. All rights reserved.
*
* @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
*
* @par
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
@@ -20,60 +20,48 @@
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
******************************************************************************/
-#if defined ( __ICCARM__ )
+#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#endif
#ifdef __cplusplus
extern "C" {
-#endif
+#endif
#ifndef __CORE_CM0_H_GENERIC
#define __CORE_CM0_H_GENERIC
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
-/** \mainpage CMSIS Cortex-M0
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
- This documentation describes the CMSIS Cortex-M Core Peripheral Access Layer.
- It consists of:
-
- - Cortex-M Core Register Definitions
- - Cortex-M functions
- - Cortex-M instructions
-
- The CMSIS Cortex-M0 Core Peripheral Access Layer contains C and assembly functions that ease
- access to the Cortex-M Core
- */
-
-/** \defgroup CMSIS_LintCinfiguration CMSIS Lint Configuration
- List of Lint messages which will be suppressed and not shown:
- - not yet checked
- .
- Note: To re-enable a Message, insert a space before 'lint' *
-
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
*/
/*******************************************************************************
* CMSIS definitions
******************************************************************************/
-/** \defgroup CMSIS_core_definitions CMSIS Core Definitions
- This file defines all structures and symbols for CMSIS core:
- - CMSIS version number
- - Cortex-M core
- - Cortex-M core Revision Number
+/** \ingroup Cortex_M0
@{
*/
/* CMSIS CM0 definitions */
-#define __CM0_CMSIS_VERSION_MAIN (0x02) /*!< [31:16] CMSIS HAL main version */
-#define __CM0_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
-#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | __CM0_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
-#define __CORTEX_M (0x00) /*!< Cortex core */
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
-#if defined ( __CC_ARM )
+#if defined ( __CC_ARM )
#define __ASM __asm /*!< asm keyword for ARM Compiler */
#define __INLINE __inline /*!< inline keyword for ARM Compiler */
@@ -81,55 +69,103 @@
#define __ASM __asm /*!< asm keyword for IAR Compiler */
#define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
-#elif defined ( __GNUC__ )
+#elif defined ( __GNUC__ )
#define __ASM __asm /*!< asm keyword for GNU Compiler */
#define __INLINE inline /*!< inline keyword for GNU Compiler */
-#elif defined ( __TASKING__ )
+#elif defined ( __TASKING__ )
#define __ASM __asm /*!< asm keyword for TASKING Compiler */
#define __INLINE inline /*!< inline keyword for TASKING Compiler */
#endif
-#include <stdint.h> /*!< standard types definitions */
-#include "core_cmInstr.h" /*!< Core Instruction Access */
-#include "core_cmFunc.h" /*!< Core Function Access */
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ /* add preprocessor checks */
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
#endif /* __CORE_CM0_H_GENERIC */
-
#ifndef __CMSIS_GENERIC
#ifndef __CORE_CM0_H_DEPENDANT
#define __CORE_CM0_H_DEPENDANT
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
#ifdef __cplusplus
- #define __I volatile /*!< defines 'read only' permissions */
+ #define __I volatile /*!< Defines 'read only' permissions */
#else
- #define __I volatile const /*!< defines 'read only' permissions */
+ #define __I volatile const /*!< Defines 'read only' permissions */
#endif
-#define __O volatile /*!< defines 'write only' permissions */
-#define __IO volatile /*!< defines 'read / write' permissions */
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
-/*@} end of group CMSIS_core_definitions */
+/*@} end of group Cortex_M0 */
/*******************************************************************************
* Register Abstraction
- ******************************************************************************/
-/** \defgroup CMSIS_core_register CMSIS Core Register
Core Register contain:
- Core Register
- Core NVIC Register
- Core SCB Register
- Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
*/
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_CORE CMSIS Core
- Type definitions for the Cortex-M Core Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
@{
*/
@@ -152,7 +188,7 @@
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
+ uint32_t w; /*!< Type used for word access */
} APSR_Type;
@@ -212,9 +248,9 @@
/*@} end of group CMSIS_CORE */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_NVIC CMSIS NVIC
- Type definitions for the Cortex-M NVIC Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
@{
*/
@@ -231,15 +267,15 @@
__IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
uint32_t RESERVED3[31];
uint32_t RESERVED4[64];
- __IO uint32_t IPR[8]; /*!< Offset: 0x3EC (R/W) Interrupt Priority Register */
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
} NVIC_Type;
/*@} end of group CMSIS_NVIC */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_SCB CMSIS SCB
- Type definitions for the Cortex-M System Control Block Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
@{
*/
@@ -247,15 +283,16 @@
*/
typedef struct
{
- __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPU ID Base Register */
- __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control State Register */
- uint32_t RESERVED0;
- __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt / Reset Control Register */
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
__IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
__IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
- uint32_t RESERVED1;
+ uint32_t RESERVED1;
__IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
-} SCB_Type;
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
/* SCB CPUID Register Definitions */
#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
@@ -334,12 +371,16 @@
#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
/*@} end of group CMSIS_SCB */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_SysTick CMSIS SysTick
- Type definitions for the Cortex-M System Timer Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
@{
*/
@@ -387,30 +428,32 @@
/*@} end of group CMSIS_SysTick */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_CoreDebug CMSIS Core Debug
- Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP
- and not via processor. Therefore they are not covered by the Cortex-M0 header file.
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
@{
*/
-/*@} end of group CMSIS_CoreDebug */
-
-
-/** \ingroup CMSIS_core_register
- @{
- */
-
/* Memory mapping of Cortex-M0 Hardware */
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
-#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
-#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
/*@} */
@@ -418,20 +461,21 @@
/*******************************************************************************
* Hardware Abstraction Layer
- ******************************************************************************/
-/** \defgroup CMSIS_Core_FunctionInterface CMSIS Core Function Interface
Core Function Interface contains:
- Core NVIC Functions
- Core SysTick Functions
- Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
*/
/* ########################## NVIC functions #################################### */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_NVICFunctions CMSIS Core NVIC Functions
- @{
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
*/
/* Interrupt Priorities are WORD accessible only under ARMv6M */
@@ -443,10 +487,9 @@
/** \brief Enable External Interrupt
- This function enables a device specific interrupt in the NVIC interrupt controller.
- The interrupt number cannot be a negative value.
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn Number of the external interrupt to enable
+ \param [in] IRQn External interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
{
@@ -456,10 +499,9 @@
/** \brief Disable External Interrupt
- This function disables a device specific interupt in the NVIC interrupt controller.
- The interrupt number cannot be a negative value.
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn Number of the external interrupt to disable
+ \param [in] IRQn External interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
{
@@ -469,12 +511,13 @@
/** \brief Get Pending Interrupt
- This function reads the pending register in the NVIC and returns the pending bit
- for the specified interrupt.
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
- \param [in] IRQn Number of the interrupt for get pending
- \return 0 Interrupt status is not pending
- \return 1 Interrupt status is pending
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
*/
static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
@@ -484,10 +527,9 @@
/** \brief Set Pending Interrupt
- This function sets the pending bit for the specified interrupt.
- The interrupt number cannot be a negative value.
+ The function sets the pending bit of an external interrupt.
- \param [in] IRQn Number of the interrupt for set pending
+ \param [in] IRQn Interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
@@ -497,10 +539,9 @@
/** \brief Clear Pending Interrupt
- This function clears the pending bit for the specified interrupt.
- The interrupt number cannot be a negative value.
+ The function clears the pending bit of an external interrupt.
- \param [in] IRQn Number of the interrupt for clear pending
+ \param [in] IRQn External interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
@@ -510,37 +551,34 @@
/** \brief Set Interrupt Priority
- This function sets the priority for the specified interrupt. The interrupt
- number can be positive to specify an external (device specific)
- interrupt, or negative to specify an internal (core) interrupt.
+ The function sets the priority of an interrupt.
- Note: The priority cannot be set for every core interrupt.
+ \note The priority cannot be set for every core interrupt.
- \param [in] IRQn Number of the interrupt for set priority
- \param [in] priority Priority to set
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
*/
static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
if(IRQn < 0) {
- SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
(((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
else {
- NVIC->IPR[_IP_IDX(IRQn)] = (NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
(((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
}
/** \brief Get Interrupt Priority
- This function reads the priority for the specified interrupt. The interrupt
- number can be positive to specify an external (device specific)
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
interrupt, or negative to specify an internal (core) interrupt.
- The returned priority value is automatically aligned to the implemented
- priority bits of the microcontroller.
- \param [in] IRQn Number of the interrupt for get priority
- \return Interrupt Priority
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
*/
static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
{
@@ -548,21 +586,21 @@
if(IRQn < 0) {
return((uint32_t)((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
else {
- return((uint32_t)((NVIC->IPR[_IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+ return((uint32_t)((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
}
/** \brief System Reset
- This function initiate a system reset request to reset the MCU.
+ The function initiates a system reset request to reset the MCU.
*/
static __INLINE void NVIC_SystemReset(void)
{
__DSB(); /* Ensure all outstanding memory accesses included
- buffered write are completed before reset */
- SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
SCB_AIRCR_SYSRESETREQ_Msk);
- __DSB(); /* Ensure completion of memory access */
+ __DSB(); /* Ensure completion of memory access */
while(1); /* wait until reset */
}
@@ -571,8 +609,9 @@
/* ################################## SysTick function ############################################ */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_SysTickFunctions CMSIS Core SysTick Functions
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
@{
*/
@@ -580,22 +619,28 @@
/** \brief System Tick Configuration
- This function initialises the system tick timer and its interrupt and start the system tick timer.
- Counter is in free running mode to generate periodical interrupts.
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
- \param [in] ticks Number of ticks between two interrupts
- \return 0 Function succeeded
- \return 1 Function failed
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
*/
static __INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
+{
if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
-
+
SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
SysTick->VAL = 0; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
return (0); /* Function successful */
}
@@ -614,5 +659,3 @@
#ifdef __cplusplus
}
#endif
-
-/*lint -restore */
Binary file LPC11U24/ARM/mbed.ar has changed
Binary file LPC11U24/ARM/system_LPC11Uxx.o has changed
--- a/LPC11U24/GCC_ARM/core_cm0.h Wed Jan 04 16:29:47 2012 +0000
+++ b/LPC11U24/GCC_ARM/core_cm0.h Fri Jan 06 12:02:19 2012 +0000
@@ -1,16 +1,16 @@
/**************************************************************************//**
* @file core_cm0.h
* @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
- * @version V2.03
- * @date 23. May 2011
+ * @version V3.00
+ * @date 09. December 2011
*
* @note
* Copyright (C) 2009-2011 ARM Limited. All rights reserved.
*
* @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
*
* @par
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
@@ -20,60 +20,48 @@
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
******************************************************************************/
-#if defined ( __ICCARM__ )
+#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#endif
#ifdef __cplusplus
extern "C" {
-#endif
+#endif
#ifndef __CORE_CM0_H_GENERIC
#define __CORE_CM0_H_GENERIC
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
-/** \mainpage CMSIS Cortex-M0
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
- This documentation describes the CMSIS Cortex-M Core Peripheral Access Layer.
- It consists of:
-
- - Cortex-M Core Register Definitions
- - Cortex-M functions
- - Cortex-M instructions
-
- The CMSIS Cortex-M0 Core Peripheral Access Layer contains C and assembly functions that ease
- access to the Cortex-M Core
- */
-
-/** \defgroup CMSIS_LintCinfiguration CMSIS Lint Configuration
- List of Lint messages which will be suppressed and not shown:
- - not yet checked
- .
- Note: To re-enable a Message, insert a space before 'lint' *
-
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
*/
/*******************************************************************************
* CMSIS definitions
******************************************************************************/
-/** \defgroup CMSIS_core_definitions CMSIS Core Definitions
- This file defines all structures and symbols for CMSIS core:
- - CMSIS version number
- - Cortex-M core
- - Cortex-M core Revision Number
+/** \ingroup Cortex_M0
@{
*/
/* CMSIS CM0 definitions */
-#define __CM0_CMSIS_VERSION_MAIN (0x02) /*!< [31:16] CMSIS HAL main version */
-#define __CM0_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
-#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | __CM0_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
-#define __CORTEX_M (0x00) /*!< Cortex core */
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
-#if defined ( __CC_ARM )
+#if defined ( __CC_ARM )
#define __ASM __asm /*!< asm keyword for ARM Compiler */
#define __INLINE __inline /*!< inline keyword for ARM Compiler */
@@ -81,55 +69,103 @@
#define __ASM __asm /*!< asm keyword for IAR Compiler */
#define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
-#elif defined ( __GNUC__ )
+#elif defined ( __GNUC__ )
#define __ASM __asm /*!< asm keyword for GNU Compiler */
#define __INLINE inline /*!< inline keyword for GNU Compiler */
-#elif defined ( __TASKING__ )
+#elif defined ( __TASKING__ )
#define __ASM __asm /*!< asm keyword for TASKING Compiler */
#define __INLINE inline /*!< inline keyword for TASKING Compiler */
#endif
-#include <stdint.h> /*!< standard types definitions */
-#include "core_cmInstr.h" /*!< Core Instruction Access */
-#include "core_cmFunc.h" /*!< Core Function Access */
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ /* add preprocessor checks */
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
#endif /* __CORE_CM0_H_GENERIC */
-
#ifndef __CMSIS_GENERIC
#ifndef __CORE_CM0_H_DEPENDANT
#define __CORE_CM0_H_DEPENDANT
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
#ifdef __cplusplus
- #define __I volatile /*!< defines 'read only' permissions */
+ #define __I volatile /*!< Defines 'read only' permissions */
#else
- #define __I volatile const /*!< defines 'read only' permissions */
+ #define __I volatile const /*!< Defines 'read only' permissions */
#endif
-#define __O volatile /*!< defines 'write only' permissions */
-#define __IO volatile /*!< defines 'read / write' permissions */
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
-/*@} end of group CMSIS_core_definitions */
+/*@} end of group Cortex_M0 */
/*******************************************************************************
* Register Abstraction
- ******************************************************************************/
-/** \defgroup CMSIS_core_register CMSIS Core Register
Core Register contain:
- Core Register
- Core NVIC Register
- Core SCB Register
- Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
*/
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_CORE CMSIS Core
- Type definitions for the Cortex-M Core Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
@{
*/
@@ -152,7 +188,7 @@
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
+ uint32_t w; /*!< Type used for word access */
} APSR_Type;
@@ -212,9 +248,9 @@
/*@} end of group CMSIS_CORE */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_NVIC CMSIS NVIC
- Type definitions for the Cortex-M NVIC Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
@{
*/
@@ -231,15 +267,15 @@
__IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
uint32_t RESERVED3[31];
uint32_t RESERVED4[64];
- __IO uint32_t IPR[8]; /*!< Offset: 0x3EC (R/W) Interrupt Priority Register */
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
} NVIC_Type;
/*@} end of group CMSIS_NVIC */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_SCB CMSIS SCB
- Type definitions for the Cortex-M System Control Block Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
@{
*/
@@ -247,15 +283,16 @@
*/
typedef struct
{
- __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPU ID Base Register */
- __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control State Register */
- uint32_t RESERVED0;
- __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt / Reset Control Register */
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
__IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
__IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
- uint32_t RESERVED1;
+ uint32_t RESERVED1;
__IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
-} SCB_Type;
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
/* SCB CPUID Register Definitions */
#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
@@ -334,12 +371,16 @@
#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
/*@} end of group CMSIS_SCB */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_SysTick CMSIS SysTick
- Type definitions for the Cortex-M System Timer Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
@{
*/
@@ -387,30 +428,32 @@
/*@} end of group CMSIS_SysTick */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_CoreDebug CMSIS Core Debug
- Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP
- and not via processor. Therefore they are not covered by the Cortex-M0 header file.
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
@{
*/
-/*@} end of group CMSIS_CoreDebug */
-
-
-/** \ingroup CMSIS_core_register
- @{
- */
-
/* Memory mapping of Cortex-M0 Hardware */
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
-#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
-#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
/*@} */
@@ -418,20 +461,21 @@
/*******************************************************************************
* Hardware Abstraction Layer
- ******************************************************************************/
-/** \defgroup CMSIS_Core_FunctionInterface CMSIS Core Function Interface
Core Function Interface contains:
- Core NVIC Functions
- Core SysTick Functions
- Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
*/
/* ########################## NVIC functions #################################### */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_NVICFunctions CMSIS Core NVIC Functions
- @{
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
*/
/* Interrupt Priorities are WORD accessible only under ARMv6M */
@@ -443,10 +487,9 @@
/** \brief Enable External Interrupt
- This function enables a device specific interrupt in the NVIC interrupt controller.
- The interrupt number cannot be a negative value.
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn Number of the external interrupt to enable
+ \param [in] IRQn External interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
{
@@ -456,10 +499,9 @@
/** \brief Disable External Interrupt
- This function disables a device specific interupt in the NVIC interrupt controller.
- The interrupt number cannot be a negative value.
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn Number of the external interrupt to disable
+ \param [in] IRQn External interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
{
@@ -469,12 +511,13 @@
/** \brief Get Pending Interrupt
- This function reads the pending register in the NVIC and returns the pending bit
- for the specified interrupt.
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
- \param [in] IRQn Number of the interrupt for get pending
- \return 0 Interrupt status is not pending
- \return 1 Interrupt status is pending
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
*/
static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
@@ -484,10 +527,9 @@
/** \brief Set Pending Interrupt
- This function sets the pending bit for the specified interrupt.
- The interrupt number cannot be a negative value.
+ The function sets the pending bit of an external interrupt.
- \param [in] IRQn Number of the interrupt for set pending
+ \param [in] IRQn Interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
@@ -497,10 +539,9 @@
/** \brief Clear Pending Interrupt
- This function clears the pending bit for the specified interrupt.
- The interrupt number cannot be a negative value.
+ The function clears the pending bit of an external interrupt.
- \param [in] IRQn Number of the interrupt for clear pending
+ \param [in] IRQn External interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
@@ -510,37 +551,34 @@
/** \brief Set Interrupt Priority
- This function sets the priority for the specified interrupt. The interrupt
- number can be positive to specify an external (device specific)
- interrupt, or negative to specify an internal (core) interrupt.
+ The function sets the priority of an interrupt.
- Note: The priority cannot be set for every core interrupt.
+ \note The priority cannot be set for every core interrupt.
- \param [in] IRQn Number of the interrupt for set priority
- \param [in] priority Priority to set
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
*/
static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
if(IRQn < 0) {
- SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
(((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
else {
- NVIC->IPR[_IP_IDX(IRQn)] = (NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
(((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
}
/** \brief Get Interrupt Priority
- This function reads the priority for the specified interrupt. The interrupt
- number can be positive to specify an external (device specific)
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
interrupt, or negative to specify an internal (core) interrupt.
- The returned priority value is automatically aligned to the implemented
- priority bits of the microcontroller.
- \param [in] IRQn Number of the interrupt for get priority
- \return Interrupt Priority
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
*/
static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
{
@@ -548,21 +586,21 @@
if(IRQn < 0) {
return((uint32_t)((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
else {
- return((uint32_t)((NVIC->IPR[_IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+ return((uint32_t)((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
}
/** \brief System Reset
- This function initiate a system reset request to reset the MCU.
+ The function initiates a system reset request to reset the MCU.
*/
static __INLINE void NVIC_SystemReset(void)
{
__DSB(); /* Ensure all outstanding memory accesses included
- buffered write are completed before reset */
- SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
SCB_AIRCR_SYSRESETREQ_Msk);
- __DSB(); /* Ensure completion of memory access */
+ __DSB(); /* Ensure completion of memory access */
while(1); /* wait until reset */
}
@@ -571,8 +609,9 @@
/* ################################## SysTick function ############################################ */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_SysTickFunctions CMSIS Core SysTick Functions
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
@{
*/
@@ -580,22 +619,28 @@
/** \brief System Tick Configuration
- This function initialises the system tick timer and its interrupt and start the system tick timer.
- Counter is in free running mode to generate periodical interrupts.
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
- \param [in] ticks Number of ticks between two interrupts
- \return 0 Function succeeded
- \return 1 Function failed
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
*/
static __INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
+{
if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
-
+
SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
SysTick->VAL = 0; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
return (0); /* Function successful */
}
@@ -614,5 +659,3 @@
#ifdef __cplusplus
}
#endif
-
-/*lint -restore */
Binary file LPC11U24/GCC_ARM/libcapi.a has changed
Binary file LPC11U24/GCC_ARM/libmbed.a has changed
--- a/LPC11U24/GCC_CR/core_cm0.h Wed Jan 04 16:29:47 2012 +0000
+++ b/LPC11U24/GCC_CR/core_cm0.h Fri Jan 06 12:02:19 2012 +0000
@@ -1,16 +1,16 @@
/**************************************************************************//**
* @file core_cm0.h
* @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
- * @version V2.03
- * @date 23. May 2011
+ * @version V3.00
+ * @date 09. December 2011
*
* @note
* Copyright (C) 2009-2011 ARM Limited. All rights reserved.
*
* @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
*
* @par
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
@@ -20,60 +20,48 @@
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
******************************************************************************/
-#if defined ( __ICCARM__ )
+#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#endif
#ifdef __cplusplus
extern "C" {
-#endif
+#endif
#ifndef __CORE_CM0_H_GENERIC
#define __CORE_CM0_H_GENERIC
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
-/** \mainpage CMSIS Cortex-M0
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
- This documentation describes the CMSIS Cortex-M Core Peripheral Access Layer.
- It consists of:
-
- - Cortex-M Core Register Definitions
- - Cortex-M functions
- - Cortex-M instructions
-
- The CMSIS Cortex-M0 Core Peripheral Access Layer contains C and assembly functions that ease
- access to the Cortex-M Core
- */
-
-/** \defgroup CMSIS_LintCinfiguration CMSIS Lint Configuration
- List of Lint messages which will be suppressed and not shown:
- - not yet checked
- .
- Note: To re-enable a Message, insert a space before 'lint' *
-
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
*/
/*******************************************************************************
* CMSIS definitions
******************************************************************************/
-/** \defgroup CMSIS_core_definitions CMSIS Core Definitions
- This file defines all structures and symbols for CMSIS core:
- - CMSIS version number
- - Cortex-M core
- - Cortex-M core Revision Number
+/** \ingroup Cortex_M0
@{
*/
/* CMSIS CM0 definitions */
-#define __CM0_CMSIS_VERSION_MAIN (0x02) /*!< [31:16] CMSIS HAL main version */
-#define __CM0_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
-#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | __CM0_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
-#define __CORTEX_M (0x00) /*!< Cortex core */
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
-#if defined ( __CC_ARM )
+#if defined ( __CC_ARM )
#define __ASM __asm /*!< asm keyword for ARM Compiler */
#define __INLINE __inline /*!< inline keyword for ARM Compiler */
@@ -81,55 +69,103 @@
#define __ASM __asm /*!< asm keyword for IAR Compiler */
#define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
-#elif defined ( __GNUC__ )
+#elif defined ( __GNUC__ )
#define __ASM __asm /*!< asm keyword for GNU Compiler */
#define __INLINE inline /*!< inline keyword for GNU Compiler */
-#elif defined ( __TASKING__ )
+#elif defined ( __TASKING__ )
#define __ASM __asm /*!< asm keyword for TASKING Compiler */
#define __INLINE inline /*!< inline keyword for TASKING Compiler */
#endif
-#include <stdint.h> /*!< standard types definitions */
-#include "core_cmInstr.h" /*!< Core Instruction Access */
-#include "core_cmFunc.h" /*!< Core Function Access */
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ /* add preprocessor checks */
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
#endif /* __CORE_CM0_H_GENERIC */
-
#ifndef __CMSIS_GENERIC
#ifndef __CORE_CM0_H_DEPENDANT
#define __CORE_CM0_H_DEPENDANT
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
#ifdef __cplusplus
- #define __I volatile /*!< defines 'read only' permissions */
+ #define __I volatile /*!< Defines 'read only' permissions */
#else
- #define __I volatile const /*!< defines 'read only' permissions */
+ #define __I volatile const /*!< Defines 'read only' permissions */
#endif
-#define __O volatile /*!< defines 'write only' permissions */
-#define __IO volatile /*!< defines 'read / write' permissions */
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
-/*@} end of group CMSIS_core_definitions */
+/*@} end of group Cortex_M0 */
/*******************************************************************************
* Register Abstraction
- ******************************************************************************/
-/** \defgroup CMSIS_core_register CMSIS Core Register
Core Register contain:
- Core Register
- Core NVIC Register
- Core SCB Register
- Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
*/
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_CORE CMSIS Core
- Type definitions for the Cortex-M Core Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
@{
*/
@@ -152,7 +188,7 @@
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
+ uint32_t w; /*!< Type used for word access */
} APSR_Type;
@@ -212,9 +248,9 @@
/*@} end of group CMSIS_CORE */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_NVIC CMSIS NVIC
- Type definitions for the Cortex-M NVIC Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
@{
*/
@@ -231,15 +267,15 @@
__IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
uint32_t RESERVED3[31];
uint32_t RESERVED4[64];
- __IO uint32_t IPR[8]; /*!< Offset: 0x3EC (R/W) Interrupt Priority Register */
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
} NVIC_Type;
/*@} end of group CMSIS_NVIC */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_SCB CMSIS SCB
- Type definitions for the Cortex-M System Control Block Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
@{
*/
@@ -247,15 +283,16 @@
*/
typedef struct
{
- __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPU ID Base Register */
- __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control State Register */
- uint32_t RESERVED0;
- __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt / Reset Control Register */
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
__IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
__IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
- uint32_t RESERVED1;
+ uint32_t RESERVED1;
__IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
-} SCB_Type;
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
/* SCB CPUID Register Definitions */
#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
@@ -334,12 +371,16 @@
#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
/*@} end of group CMSIS_SCB */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_SysTick CMSIS SysTick
- Type definitions for the Cortex-M System Timer Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
@{
*/
@@ -387,30 +428,32 @@
/*@} end of group CMSIS_SysTick */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_CoreDebug CMSIS Core Debug
- Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP
- and not via processor. Therefore they are not covered by the Cortex-M0 header file.
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
@{
*/
-/*@} end of group CMSIS_CoreDebug */
-
-
-/** \ingroup CMSIS_core_register
- @{
- */
-
/* Memory mapping of Cortex-M0 Hardware */
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
-#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
-#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
/*@} */
@@ -418,20 +461,21 @@
/*******************************************************************************
* Hardware Abstraction Layer
- ******************************************************************************/
-/** \defgroup CMSIS_Core_FunctionInterface CMSIS Core Function Interface
Core Function Interface contains:
- Core NVIC Functions
- Core SysTick Functions
- Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
*/
/* ########################## NVIC functions #################################### */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_NVICFunctions CMSIS Core NVIC Functions
- @{
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
*/
/* Interrupt Priorities are WORD accessible only under ARMv6M */
@@ -443,10 +487,9 @@
/** \brief Enable External Interrupt
- This function enables a device specific interrupt in the NVIC interrupt controller.
- The interrupt number cannot be a negative value.
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn Number of the external interrupt to enable
+ \param [in] IRQn External interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
{
@@ -456,10 +499,9 @@
/** \brief Disable External Interrupt
- This function disables a device specific interupt in the NVIC interrupt controller.
- The interrupt number cannot be a negative value.
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn Number of the external interrupt to disable
+ \param [in] IRQn External interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
{
@@ -469,12 +511,13 @@
/** \brief Get Pending Interrupt
- This function reads the pending register in the NVIC and returns the pending bit
- for the specified interrupt.
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
- \param [in] IRQn Number of the interrupt for get pending
- \return 0 Interrupt status is not pending
- \return 1 Interrupt status is pending
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
*/
static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
@@ -484,10 +527,9 @@
/** \brief Set Pending Interrupt
- This function sets the pending bit for the specified interrupt.
- The interrupt number cannot be a negative value.
+ The function sets the pending bit of an external interrupt.
- \param [in] IRQn Number of the interrupt for set pending
+ \param [in] IRQn Interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
@@ -497,10 +539,9 @@
/** \brief Clear Pending Interrupt
- This function clears the pending bit for the specified interrupt.
- The interrupt number cannot be a negative value.
+ The function clears the pending bit of an external interrupt.
- \param [in] IRQn Number of the interrupt for clear pending
+ \param [in] IRQn External interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
@@ -510,37 +551,34 @@
/** \brief Set Interrupt Priority
- This function sets the priority for the specified interrupt. The interrupt
- number can be positive to specify an external (device specific)
- interrupt, or negative to specify an internal (core) interrupt.
+ The function sets the priority of an interrupt.
- Note: The priority cannot be set for every core interrupt.
+ \note The priority cannot be set for every core interrupt.
- \param [in] IRQn Number of the interrupt for set priority
- \param [in] priority Priority to set
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
*/
static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
if(IRQn < 0) {
- SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
(((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
else {
- NVIC->IPR[_IP_IDX(IRQn)] = (NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
(((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
}
/** \brief Get Interrupt Priority
- This function reads the priority for the specified interrupt. The interrupt
- number can be positive to specify an external (device specific)
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
interrupt, or negative to specify an internal (core) interrupt.
- The returned priority value is automatically aligned to the implemented
- priority bits of the microcontroller.
- \param [in] IRQn Number of the interrupt for get priority
- \return Interrupt Priority
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
*/
static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
{
@@ -548,21 +586,21 @@
if(IRQn < 0) {
return((uint32_t)((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
else {
- return((uint32_t)((NVIC->IPR[_IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+ return((uint32_t)((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
}
/** \brief System Reset
- This function initiate a system reset request to reset the MCU.
+ The function initiates a system reset request to reset the MCU.
*/
static __INLINE void NVIC_SystemReset(void)
{
__DSB(); /* Ensure all outstanding memory accesses included
- buffered write are completed before reset */
- SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
SCB_AIRCR_SYSRESETREQ_Msk);
- __DSB(); /* Ensure completion of memory access */
+ __DSB(); /* Ensure completion of memory access */
while(1); /* wait until reset */
}
@@ -571,8 +609,9 @@
/* ################################## SysTick function ############################################ */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_SysTickFunctions CMSIS Core SysTick Functions
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
@{
*/
@@ -580,22 +619,28 @@
/** \brief System Tick Configuration
- This function initialises the system tick timer and its interrupt and start the system tick timer.
- Counter is in free running mode to generate periodical interrupts.
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
- \param [in] ticks Number of ticks between two interrupts
- \return 0 Function succeeded
- \return 1 Function failed
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
*/
static __INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
+{
if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
-
+
SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
SysTick->VAL = 0; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
return (0); /* Function successful */
}
@@ -614,5 +659,3 @@
#ifdef __cplusplus
}
#endif
-
-/*lint -restore */
Binary file LPC11U24/GCC_CR/libcapi.a has changed
Binary file LPC11U24/GCC_CR/libmbed.a has changed
--- a/LPC11U24/GCC_CS/core_cm0.h Wed Jan 04 16:29:47 2012 +0000
+++ b/LPC11U24/GCC_CS/core_cm0.h Fri Jan 06 12:02:19 2012 +0000
@@ -1,16 +1,16 @@
/**************************************************************************//**
* @file core_cm0.h
* @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
- * @version V2.03
- * @date 23. May 2011
+ * @version V3.00
+ * @date 09. December 2011
*
* @note
* Copyright (C) 2009-2011 ARM Limited. All rights reserved.
*
* @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
*
* @par
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
@@ -20,60 +20,48 @@
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
******************************************************************************/
-#if defined ( __ICCARM__ )
+#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#endif
#ifdef __cplusplus
extern "C" {
-#endif
+#endif
#ifndef __CORE_CM0_H_GENERIC
#define __CORE_CM0_H_GENERIC
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
-/** \mainpage CMSIS Cortex-M0
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
- This documentation describes the CMSIS Cortex-M Core Peripheral Access Layer.
- It consists of:
-
- - Cortex-M Core Register Definitions
- - Cortex-M functions
- - Cortex-M instructions
-
- The CMSIS Cortex-M0 Core Peripheral Access Layer contains C and assembly functions that ease
- access to the Cortex-M Core
- */
-
-/** \defgroup CMSIS_LintCinfiguration CMSIS Lint Configuration
- List of Lint messages which will be suppressed and not shown:
- - not yet checked
- .
- Note: To re-enable a Message, insert a space before 'lint' *
-
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
*/
/*******************************************************************************
* CMSIS definitions
******************************************************************************/
-/** \defgroup CMSIS_core_definitions CMSIS Core Definitions
- This file defines all structures and symbols for CMSIS core:
- - CMSIS version number
- - Cortex-M core
- - Cortex-M core Revision Number
+/** \ingroup Cortex_M0
@{
*/
/* CMSIS CM0 definitions */
-#define __CM0_CMSIS_VERSION_MAIN (0x02) /*!< [31:16] CMSIS HAL main version */
-#define __CM0_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
-#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | __CM0_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
-#define __CORTEX_M (0x00) /*!< Cortex core */
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
-#if defined ( __CC_ARM )
+#if defined ( __CC_ARM )
#define __ASM __asm /*!< asm keyword for ARM Compiler */
#define __INLINE __inline /*!< inline keyword for ARM Compiler */
@@ -81,55 +69,103 @@
#define __ASM __asm /*!< asm keyword for IAR Compiler */
#define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
-#elif defined ( __GNUC__ )
+#elif defined ( __GNUC__ )
#define __ASM __asm /*!< asm keyword for GNU Compiler */
#define __INLINE inline /*!< inline keyword for GNU Compiler */
-#elif defined ( __TASKING__ )
+#elif defined ( __TASKING__ )
#define __ASM __asm /*!< asm keyword for TASKING Compiler */
#define __INLINE inline /*!< inline keyword for TASKING Compiler */
#endif
-#include <stdint.h> /*!< standard types definitions */
-#include "core_cmInstr.h" /*!< Core Instruction Access */
-#include "core_cmFunc.h" /*!< Core Function Access */
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ /* add preprocessor checks */
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
#endif /* __CORE_CM0_H_GENERIC */
-
#ifndef __CMSIS_GENERIC
#ifndef __CORE_CM0_H_DEPENDANT
#define __CORE_CM0_H_DEPENDANT
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
#ifdef __cplusplus
- #define __I volatile /*!< defines 'read only' permissions */
+ #define __I volatile /*!< Defines 'read only' permissions */
#else
- #define __I volatile const /*!< defines 'read only' permissions */
+ #define __I volatile const /*!< Defines 'read only' permissions */
#endif
-#define __O volatile /*!< defines 'write only' permissions */
-#define __IO volatile /*!< defines 'read / write' permissions */
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
-/*@} end of group CMSIS_core_definitions */
+/*@} end of group Cortex_M0 */
/*******************************************************************************
* Register Abstraction
- ******************************************************************************/
-/** \defgroup CMSIS_core_register CMSIS Core Register
Core Register contain:
- Core Register
- Core NVIC Register
- Core SCB Register
- Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
*/
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_CORE CMSIS Core
- Type definitions for the Cortex-M Core Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
@{
*/
@@ -152,7 +188,7 @@
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
+ uint32_t w; /*!< Type used for word access */
} APSR_Type;
@@ -212,9 +248,9 @@
/*@} end of group CMSIS_CORE */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_NVIC CMSIS NVIC
- Type definitions for the Cortex-M NVIC Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
@{
*/
@@ -231,15 +267,15 @@
__IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
uint32_t RESERVED3[31];
uint32_t RESERVED4[64];
- __IO uint32_t IPR[8]; /*!< Offset: 0x3EC (R/W) Interrupt Priority Register */
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
} NVIC_Type;
/*@} end of group CMSIS_NVIC */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_SCB CMSIS SCB
- Type definitions for the Cortex-M System Control Block Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
@{
*/
@@ -247,15 +283,16 @@
*/
typedef struct
{
- __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPU ID Base Register */
- __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control State Register */
- uint32_t RESERVED0;
- __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt / Reset Control Register */
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
__IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
__IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
- uint32_t RESERVED1;
+ uint32_t RESERVED1;
__IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
-} SCB_Type;
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
/* SCB CPUID Register Definitions */
#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
@@ -334,12 +371,16 @@
#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
/*@} end of group CMSIS_SCB */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_SysTick CMSIS SysTick
- Type definitions for the Cortex-M System Timer Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
@{
*/
@@ -387,30 +428,32 @@
/*@} end of group CMSIS_SysTick */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_CoreDebug CMSIS Core Debug
- Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP
- and not via processor. Therefore they are not covered by the Cortex-M0 header file.
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
@{
*/
-/*@} end of group CMSIS_CoreDebug */
-
-
-/** \ingroup CMSIS_core_register
- @{
- */
-
/* Memory mapping of Cortex-M0 Hardware */
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
-#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
-#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
/*@} */
@@ -418,20 +461,21 @@
/*******************************************************************************
* Hardware Abstraction Layer
- ******************************************************************************/
-/** \defgroup CMSIS_Core_FunctionInterface CMSIS Core Function Interface
Core Function Interface contains:
- Core NVIC Functions
- Core SysTick Functions
- Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
*/
/* ########################## NVIC functions #################################### */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_NVICFunctions CMSIS Core NVIC Functions
- @{
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
*/
/* Interrupt Priorities are WORD accessible only under ARMv6M */
@@ -443,10 +487,9 @@
/** \brief Enable External Interrupt
- This function enables a device specific interrupt in the NVIC interrupt controller.
- The interrupt number cannot be a negative value.
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn Number of the external interrupt to enable
+ \param [in] IRQn External interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
{
@@ -456,10 +499,9 @@
/** \brief Disable External Interrupt
- This function disables a device specific interupt in the NVIC interrupt controller.
- The interrupt number cannot be a negative value.
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn Number of the external interrupt to disable
+ \param [in] IRQn External interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
{
@@ -469,12 +511,13 @@
/** \brief Get Pending Interrupt
- This function reads the pending register in the NVIC and returns the pending bit
- for the specified interrupt.
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
- \param [in] IRQn Number of the interrupt for get pending
- \return 0 Interrupt status is not pending
- \return 1 Interrupt status is pending
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
*/
static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
@@ -484,10 +527,9 @@
/** \brief Set Pending Interrupt
- This function sets the pending bit for the specified interrupt.
- The interrupt number cannot be a negative value.
+ The function sets the pending bit of an external interrupt.
- \param [in] IRQn Number of the interrupt for set pending
+ \param [in] IRQn Interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
@@ -497,10 +539,9 @@
/** \brief Clear Pending Interrupt
- This function clears the pending bit for the specified interrupt.
- The interrupt number cannot be a negative value.
+ The function clears the pending bit of an external interrupt.
- \param [in] IRQn Number of the interrupt for clear pending
+ \param [in] IRQn External interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
@@ -510,37 +551,34 @@
/** \brief Set Interrupt Priority
- This function sets the priority for the specified interrupt. The interrupt
- number can be positive to specify an external (device specific)
- interrupt, or negative to specify an internal (core) interrupt.
+ The function sets the priority of an interrupt.
- Note: The priority cannot be set for every core interrupt.
+ \note The priority cannot be set for every core interrupt.
- \param [in] IRQn Number of the interrupt for set priority
- \param [in] priority Priority to set
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
*/
static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
if(IRQn < 0) {
- SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
(((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
else {
- NVIC->IPR[_IP_IDX(IRQn)] = (NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
(((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
}
/** \brief Get Interrupt Priority
- This function reads the priority for the specified interrupt. The interrupt
- number can be positive to specify an external (device specific)
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
interrupt, or negative to specify an internal (core) interrupt.
- The returned priority value is automatically aligned to the implemented
- priority bits of the microcontroller.
- \param [in] IRQn Number of the interrupt for get priority
- \return Interrupt Priority
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
*/
static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
{
@@ -548,21 +586,21 @@
if(IRQn < 0) {
return((uint32_t)((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
else {
- return((uint32_t)((NVIC->IPR[_IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+ return((uint32_t)((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
}
/** \brief System Reset
- This function initiate a system reset request to reset the MCU.
+ The function initiates a system reset request to reset the MCU.
*/
static __INLINE void NVIC_SystemReset(void)
{
__DSB(); /* Ensure all outstanding memory accesses included
- buffered write are completed before reset */
- SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
SCB_AIRCR_SYSRESETREQ_Msk);
- __DSB(); /* Ensure completion of memory access */
+ __DSB(); /* Ensure completion of memory access */
while(1); /* wait until reset */
}
@@ -571,8 +609,9 @@
/* ################################## SysTick function ############################################ */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_SysTickFunctions CMSIS Core SysTick Functions
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
@{
*/
@@ -580,22 +619,28 @@
/** \brief System Tick Configuration
- This function initialises the system tick timer and its interrupt and start the system tick timer.
- Counter is in free running mode to generate periodical interrupts.
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
- \param [in] ticks Number of ticks between two interrupts
- \return 0 Function succeeded
- \return 1 Function failed
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
*/
static __INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
+{
if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
-
+
SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
SysTick->VAL = 0; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
return (0); /* Function successful */
}
@@ -614,5 +659,3 @@
#ifdef __cplusplus
}
#endif
-
-/*lint -restore */
Binary file LPC11U24/GCC_CS/libcapi.a has changed
Binary file LPC11U24/GCC_CS/libmbed.a has changed
Binary file LPC11U24/uARM/capi.ar has changed
Binary file LPC11U24/uARM/cmsis_nvic.o has changed
--- a/LPC11U24/uARM/core_cm0.h Wed Jan 04 16:29:47 2012 +0000
+++ b/LPC11U24/uARM/core_cm0.h Fri Jan 06 12:02:19 2012 +0000
@@ -1,16 +1,16 @@
/**************************************************************************//**
* @file core_cm0.h
* @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
- * @version V2.03
- * @date 23. May 2011
+ * @version V3.00
+ * @date 09. December 2011
*
* @note
* Copyright (C) 2009-2011 ARM Limited. All rights reserved.
*
* @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
*
* @par
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
@@ -20,60 +20,48 @@
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
******************************************************************************/
-#if defined ( __ICCARM__ )
+#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#endif
#ifdef __cplusplus
extern "C" {
-#endif
+#endif
#ifndef __CORE_CM0_H_GENERIC
#define __CORE_CM0_H_GENERIC
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
-/** \mainpage CMSIS Cortex-M0
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
- This documentation describes the CMSIS Cortex-M Core Peripheral Access Layer.
- It consists of:
-
- - Cortex-M Core Register Definitions
- - Cortex-M functions
- - Cortex-M instructions
-
- The CMSIS Cortex-M0 Core Peripheral Access Layer contains C and assembly functions that ease
- access to the Cortex-M Core
- */
-
-/** \defgroup CMSIS_LintCinfiguration CMSIS Lint Configuration
- List of Lint messages which will be suppressed and not shown:
- - not yet checked
- .
- Note: To re-enable a Message, insert a space before 'lint' *
-
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
*/
/*******************************************************************************
* CMSIS definitions
******************************************************************************/
-/** \defgroup CMSIS_core_definitions CMSIS Core Definitions
- This file defines all structures and symbols for CMSIS core:
- - CMSIS version number
- - Cortex-M core
- - Cortex-M core Revision Number
+/** \ingroup Cortex_M0
@{
*/
/* CMSIS CM0 definitions */
-#define __CM0_CMSIS_VERSION_MAIN (0x02) /*!< [31:16] CMSIS HAL main version */
-#define __CM0_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
-#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | __CM0_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
-#define __CORTEX_M (0x00) /*!< Cortex core */
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
-#if defined ( __CC_ARM )
+#if defined ( __CC_ARM )
#define __ASM __asm /*!< asm keyword for ARM Compiler */
#define __INLINE __inline /*!< inline keyword for ARM Compiler */
@@ -81,55 +69,103 @@
#define __ASM __asm /*!< asm keyword for IAR Compiler */
#define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
-#elif defined ( __GNUC__ )
+#elif defined ( __GNUC__ )
#define __ASM __asm /*!< asm keyword for GNU Compiler */
#define __INLINE inline /*!< inline keyword for GNU Compiler */
-#elif defined ( __TASKING__ )
+#elif defined ( __TASKING__ )
#define __ASM __asm /*!< asm keyword for TASKING Compiler */
#define __INLINE inline /*!< inline keyword for TASKING Compiler */
#endif
-#include <stdint.h> /*!< standard types definitions */
-#include "core_cmInstr.h" /*!< Core Instruction Access */
-#include "core_cmFunc.h" /*!< Core Function Access */
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ /* add preprocessor checks */
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
#endif /* __CORE_CM0_H_GENERIC */
-
#ifndef __CMSIS_GENERIC
#ifndef __CORE_CM0_H_DEPENDANT
#define __CORE_CM0_H_DEPENDANT
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
#ifdef __cplusplus
- #define __I volatile /*!< defines 'read only' permissions */
+ #define __I volatile /*!< Defines 'read only' permissions */
#else
- #define __I volatile const /*!< defines 'read only' permissions */
+ #define __I volatile const /*!< Defines 'read only' permissions */
#endif
-#define __O volatile /*!< defines 'write only' permissions */
-#define __IO volatile /*!< defines 'read / write' permissions */
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
-/*@} end of group CMSIS_core_definitions */
+/*@} end of group Cortex_M0 */
/*******************************************************************************
* Register Abstraction
- ******************************************************************************/
-/** \defgroup CMSIS_core_register CMSIS Core Register
Core Register contain:
- Core Register
- Core NVIC Register
- Core SCB Register
- Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
*/
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_CORE CMSIS Core
- Type definitions for the Cortex-M Core Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
@{
*/
@@ -152,7 +188,7 @@
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
+ uint32_t w; /*!< Type used for word access */
} APSR_Type;
@@ -212,9 +248,9 @@
/*@} end of group CMSIS_CORE */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_NVIC CMSIS NVIC
- Type definitions for the Cortex-M NVIC Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
@{
*/
@@ -231,15 +267,15 @@
__IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
uint32_t RESERVED3[31];
uint32_t RESERVED4[64];
- __IO uint32_t IPR[8]; /*!< Offset: 0x3EC (R/W) Interrupt Priority Register */
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
} NVIC_Type;
/*@} end of group CMSIS_NVIC */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_SCB CMSIS SCB
- Type definitions for the Cortex-M System Control Block Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
@{
*/
@@ -247,15 +283,16 @@
*/
typedef struct
{
- __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPU ID Base Register */
- __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control State Register */
- uint32_t RESERVED0;
- __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt / Reset Control Register */
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
__IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
__IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
- uint32_t RESERVED1;
+ uint32_t RESERVED1;
__IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
-} SCB_Type;
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
/* SCB CPUID Register Definitions */
#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
@@ -334,12 +371,16 @@
#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
/*@} end of group CMSIS_SCB */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_SysTick CMSIS SysTick
- Type definitions for the Cortex-M System Timer Registers
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
@{
*/
@@ -387,30 +428,32 @@
/*@} end of group CMSIS_SysTick */
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_CoreDebug CMSIS Core Debug
- Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP
- and not via processor. Therefore they are not covered by the Cortex-M0 header file.
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
@{
*/
-/*@} end of group CMSIS_CoreDebug */
-
-
-/** \ingroup CMSIS_core_register
- @{
- */
-
/* Memory mapping of Cortex-M0 Hardware */
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
-#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
-#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
/*@} */
@@ -418,20 +461,21 @@
/*******************************************************************************
* Hardware Abstraction Layer
- ******************************************************************************/
-/** \defgroup CMSIS_Core_FunctionInterface CMSIS Core Function Interface
Core Function Interface contains:
- Core NVIC Functions
- Core SysTick Functions
- Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
*/
/* ########################## NVIC functions #################################### */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_NVICFunctions CMSIS Core NVIC Functions
- @{
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
*/
/* Interrupt Priorities are WORD accessible only under ARMv6M */
@@ -443,10 +487,9 @@
/** \brief Enable External Interrupt
- This function enables a device specific interrupt in the NVIC interrupt controller.
- The interrupt number cannot be a negative value.
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn Number of the external interrupt to enable
+ \param [in] IRQn External interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
{
@@ -456,10 +499,9 @@
/** \brief Disable External Interrupt
- This function disables a device specific interupt in the NVIC interrupt controller.
- The interrupt number cannot be a negative value.
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn Number of the external interrupt to disable
+ \param [in] IRQn External interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
{
@@ -469,12 +511,13 @@
/** \brief Get Pending Interrupt
- This function reads the pending register in the NVIC and returns the pending bit
- for the specified interrupt.
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
- \param [in] IRQn Number of the interrupt for get pending
- \return 0 Interrupt status is not pending
- \return 1 Interrupt status is pending
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
*/
static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
@@ -484,10 +527,9 @@
/** \brief Set Pending Interrupt
- This function sets the pending bit for the specified interrupt.
- The interrupt number cannot be a negative value.
+ The function sets the pending bit of an external interrupt.
- \param [in] IRQn Number of the interrupt for set pending
+ \param [in] IRQn Interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
@@ -497,10 +539,9 @@
/** \brief Clear Pending Interrupt
- This function clears the pending bit for the specified interrupt.
- The interrupt number cannot be a negative value.
+ The function clears the pending bit of an external interrupt.
- \param [in] IRQn Number of the interrupt for clear pending
+ \param [in] IRQn External interrupt number. Value cannot be negative.
*/
static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
@@ -510,37 +551,34 @@
/** \brief Set Interrupt Priority
- This function sets the priority for the specified interrupt. The interrupt
- number can be positive to specify an external (device specific)
- interrupt, or negative to specify an internal (core) interrupt.
+ The function sets the priority of an interrupt.
- Note: The priority cannot be set for every core interrupt.
+ \note The priority cannot be set for every core interrupt.
- \param [in] IRQn Number of the interrupt for set priority
- \param [in] priority Priority to set
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
*/
static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
if(IRQn < 0) {
- SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
(((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
else {
- NVIC->IPR[_IP_IDX(IRQn)] = (NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
(((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
}
/** \brief Get Interrupt Priority
- This function reads the priority for the specified interrupt. The interrupt
- number can be positive to specify an external (device specific)
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
interrupt, or negative to specify an internal (core) interrupt.
- The returned priority value is automatically aligned to the implemented
- priority bits of the microcontroller.
- \param [in] IRQn Number of the interrupt for get priority
- \return Interrupt Priority
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
*/
static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
{
@@ -548,21 +586,21 @@
if(IRQn < 0) {
return((uint32_t)((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
else {
- return((uint32_t)((NVIC->IPR[_IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+ return((uint32_t)((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
}
/** \brief System Reset
- This function initiate a system reset request to reset the MCU.
+ The function initiates a system reset request to reset the MCU.
*/
static __INLINE void NVIC_SystemReset(void)
{
__DSB(); /* Ensure all outstanding memory accesses included
- buffered write are completed before reset */
- SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
SCB_AIRCR_SYSRESETREQ_Msk);
- __DSB(); /* Ensure completion of memory access */
+ __DSB(); /* Ensure completion of memory access */
while(1); /* wait until reset */
}
@@ -571,8 +609,9 @@
/* ################################## SysTick function ############################################ */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_SysTickFunctions CMSIS Core SysTick Functions
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
@{
*/
@@ -580,22 +619,28 @@
/** \brief System Tick Configuration
- This function initialises the system tick timer and its interrupt and start the system tick timer.
- Counter is in free running mode to generate periodical interrupts.
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
- \param [in] ticks Number of ticks between two interrupts
- \return 0 Function succeeded
- \return 1 Function failed
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
*/
static __INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
+{
if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
-
+
SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
SysTick->VAL = 0; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
return (0); /* Function successful */
}
@@ -614,5 +659,3 @@
#ifdef __cplusplus
}
#endif
-
-/*lint -restore */
Binary file LPC11U24/uARM/mbed.ar has changed
Binary file LPC11U24/uARM/system_LPC11Uxx.o has changed
Binary file LPC1768/ARM/capi.ar has changed
Binary file LPC1768/ARM/cmsis_nvic.o has changed
Binary file LPC1768/ARM/mbed.ar has changed
Binary file LPC1768/ARM/system_LPC17xx.o has changed
Binary file LPC1768/GCC_ARM/libcapi.a has changed
Binary file LPC1768/GCC_ARM/libmbed.a has changed
Binary file LPC1768/GCC_CR/libcapi.a has changed
Binary file LPC1768/GCC_CR/libmbed.a has changed
Binary file LPC1768/GCC_CS/libcapi.a has changed
Binary file LPC1768/GCC_CS/libmbed.a has changed
Binary file LPC1768/uARM/capi.ar has changed
Binary file LPC1768/uARM/cmsis_nvic.o has changed
Binary file LPC1768/uARM/mbed.ar has changed
Binary file LPC1768/uARM/system_LPC17xx.o has changed
Binary file LPC2368/ARM/capi.ar has changed
Binary file LPC2368/ARM/mbed.ar has changed
Binary file LPC2368/GCC_ARM/libcapi.a has changed
Binary file LPC2368/GCC_ARM/libmbed.a has changed
Binary file LPC2368/GCC_CR/libcapi.a has changed
Binary file LPC2368/GCC_CR/libmbed.a has changed
Binary file LPC2368/GCC_CS/libcapi.a has changed
Binary file LPC2368/GCC_CS/libmbed.a has changed
Binary file LPC2368/uARM/capi.ar has changed
Binary file LPC2368/uARM/mbed.ar has changed