Diff: main.cpp

Revision:

2:fcb521c36965

Parent:

0:837bd71aa81c

Child:

3:5f002243ff14

--- a/main.cpp	Wed Oct 21 21:02:41 2020 +0000
+++ b/main.cpp	Tue Oct 27 12:13:27 2020 +0000
@@ -1,12 +1,18 @@
 #include "mbed.h"
+#include "main.h"
+#include "cmsis_os.h"
+#include "communication.h"
+#include "ADE7912.h"
+#include "stdlib.h"
 #include "EthernetInterface.h"
 #include "LWIPStack.h"
-#include "ADE7912.h"
 
 EthernetInterface net;
 
 DigitalOut led1(LED1);
 Thread thread;
+int out_buffer[2];
+
 
 void UDP_thread()
 {
@@ -22,24 +28,68 @@
     SocketAddress receive("192.168.0.1", 55151);
 
     for(;;) {
-        char out_buffer[10] = "I am LED!";
+//        out_buffer = {rand(), rand()};
 //        sock.recvfrom(&receive, &out_buffer, sizeof(out_buffer));
 //        printf(out_buffer);
         if (0 > sock.sendto(receive, out_buffer, sizeof(out_buffer))) {
             printf("Error sending data\n");
         }
-        printf(out_buffer);
+//        printf(out_buffer[0]+'0');
         ThisThread::sleep_for(2000);
     }
 }
 
+SPI_HandleTypeDef hspi1;
+
 int main()
 {
-    struct ADE7912_Phase_Settings a_phase;
     thread.start(UDP_thread);
 
-    while (true) {
-        led1 = !led1;
-        ThisThread::sleep_for(500);
+
+    hspi1.Instance = SPI1;
+    hspi1.Init.Mode = SPI_MODE_MASTER;
+    hspi1.Init.Direction = SPI_DIRECTION_2LINES;
+    hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
+    hspi1.Init.CLKPolarity = SPI_POLARITY_HIGH;
+    hspi1.Init.CLKPhase = SPI_PHASE_2EDGE;
+    hspi1.Init.NSS = SPI_NSS_SOFT;
+    hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256;
+    hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
+    hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
+    hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+    hspi1.Init.CRCPolynomial = 0x0;
+    hspi1.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
+    hspi1.Init.NSSPolarity = SPI_NSS_POLARITY_LOW;
+    hspi1.Init.FifoThreshold = SPI_FIFO_THRESHOLD_01DATA;
+    hspi1.Init.TxCRCInitializationPattern = SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN;
+    hspi1.Init.RxCRCInitializationPattern = SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN;
+    hspi1.Init.MasterSSIdleness = SPI_MASTER_SS_IDLENESS_00CYCLE;
+    hspi1.Init.MasterInterDataIdleness = SPI_MASTER_INTERDATA_IDLENESS_00CYCLE;
+    hspi1.Init.MasterReceiverAutoSusp = SPI_MASTER_RX_AUTOSUSP_DISABLE;
+    hspi1.Init.MasterKeepIOState = SPI_MASTER_KEEP_IO_STATE_DISABLE;
+    hspi1.Init.IOSwap = SPI_IO_SWAP_DISABLE;
+
+
+    uint32_t buf = 0xAA;
+    struct ADE7912_Inst *ade = New_ADE7912(&hspi1);
+    struct ADE7912_Phase_Settings a_phase;
+    a_phase.CS_pin = SPI1_CS_Pin;
+    a_phase.CS_port = SPI1_CS_GPIO_Port;
+    ADE7912_PhaseInit(ade, &a_phase, PHASE_A);
+    ADE7912_EnablePhase(ade, PHASE_A);
+
+    uint32_t tickCount = osKernelSysTick();
+    /* Infinite loop */
+    for(;;) {
+        ADE7912_UpdateData(ade);
+        out_buffer[0] = (int32_t)(ADE7912_GetCurrent(ade, PHASE_A) * 1000);
+        out_buffer[1] = (ADE7912_GetVoltage(ade, PHASE_A) * 1000);
+
+        ThisThread::sleep_for(1000);
     }
+
+    //while (true) {
+//        led1 = !led1;
+//        ThisThread::sleep_for(500);
+//    }
 }