for demonstration

Dependencies:   FatFileSystem SDFileSystem mbed

Fork of 130114_YNU_MPU_1 by yal kaiyo

Files at this revision

API Documentation at this revision

Comitter:
yal_kaiyo
Date:
Sun Jan 20 13:38:22 2013 +0000
Parent:
16:a33fe7d99a0f
Commit message:
for demonstration

Changed in this revision

main.cpp Show annotated file Show diff for this revision Revisions of this file
diff -r a33fe7d99a0f -r 3cd1afc27ca7 main.cpp
--- a/main.cpp	Wed Jan 16 13:04:38 2013 +0000
+++ b/main.cpp	Sun Jan 20 13:38:22 2013 +0000
@@ -36,8 +36,8 @@
     
     int flag_lc =   0;
     int flag_cm =   0;
-    int loop    =   100;       // for 2 minuts -> loop = 1200
-    
+    int loop    =   1200;       // for 2 minuts -> loop = 1200
+
     char  buf_char;
     unsigned int    buf_hex_rx[30]      =   {0};
     unsigned int    buf_dec_rx[10]      =   {0};
@@ -69,14 +69,16 @@
     // ******************** HOSHINO *********************
     float   time    =   0;      //time
     float   flag_int=   0;
+    float   flag_safe=  0;
+    float   flag_homo=  0;
     //initial condition
     float   drf     =   100;    //syuutandaunrenji
     float   ht0     =   0;
     float   gm0     =   20*pi/180;
     float   ua      =   1; //initial horizontal velosity
     //terminal condition
-    float   htf     =   5;    
-    float   gmf     =   5*pi/180;
+    float   htf     =   2;    
+    float   gmf     =   -20*pi/180;
      
     float   xis     =   0;
     float   ets     =   0;
@@ -89,7 +91,7 @@
     float   b2      =   0;
     float   b3      =   0;
     float   htc     =   0;
-    float   x       =   0;  //down range
+ //   float   x       =   0;  //down range
     float   xis1    =   0;
     float   ets1    =   0;
     float   xir     =   0;
@@ -115,7 +117,7 @@
     float   etc     =   0;
     float   xic     =   0;
     float   apc     =   0;
-    
+  
     //homotopy
     //initial condition
     float rps0 =  0.0;
@@ -127,8 +129,8 @@
     float et0  = ret0/drf;
     float eps  = 0.00000001;
     float ueps = 0.000001;
-    float ier  = 0.0;
-    float sum  = 0.0;
+    float ier  = 0;
+    float sum  = 0;
     float ph0[mh] = {0};
     float phi[mh] = {0};
     float fn[mh]  = {0};
@@ -145,15 +147,19 @@
     float qmax=0;
     float rdet =1;
     float idet =0;
-    float t = 0.0;
+    float t = 0;
     float phf[mh]={0};
-    float   ap[mt]={0};
-    float   ps[mt]={0};
-    float   xi[mt]={0};
-    float   et[mt]={0};
-    float   xi1[mt]={0};
-    float   et1[mt]={0};
-
+    float ap[mt]={0,      2.718,  -1.679, -4.821, -2.386, 2.22154,    0};//1-3, 2-2
+    //
+    float ps[mt]={1.099,  1.319,  1.371,  0.670,  -0.103, -0.171,     0};//1-3, 2-2
+    //
+    float xi[mt]={0,      10.28,  17.25,  30.60,  54.83,  80.37,      100};//1-3, 2-2
+    //
+    float et[mt]={0,      23.12,  46.73,  67.32,  74.76,  72.87,      70};//1-3, 2-2
+    //
+    float xi1[mt]={0};
+    float et1[mt]={0};
+ 
     //********************* HOSHINO *********************
  
     //********************* OHTSU ***********************
@@ -163,15 +169,15 @@
     float   wgt     =   0.76;
     float   rho     =   1.2255;
     
-    float   tt1     =   0.8;
-    float   omg1    =   1.0;
-    float   zet1    =   0.7;   
-    float   tt2     =   0.37;
-    float   omg2    =   2.6;
+   // float   tt1     =   0.8;
+    float   omg1    =   1.2;
+    float   zet1    =   0.5;   
+    float   tt2     =   2.0;
+    float   omg2    =   1.0;
     float   zet2    =   0.7;
     
-    float   gmr     =   20;
-    float   vmr     =   16;
+    float   gmr     =   -20;
+    float   vmr     =   20;
     float   pse     =   0;
     float   phir    =   0;
     float   ete     =   0;   
@@ -199,6 +205,7 @@
     float   avpc    =   0;
     float   avqc    =   0;
     float   avrc    =   0;
+    
     //********************* OHTSU ***********************
     
     FILE *fp = fopen("/sd/sdtest.txt", "w");
@@ -213,12 +220,49 @@
     // // flag_lc==1 is debug mode. skip this while loop. //
     // ////////// for flight mode, flag_lc is 0! ///////////
     // /////////////////////////////////////////////////////
-    while(flag_lc==1){
+    while(flag_lc==1){ // if you want to use @LC, 1 -> 2
         buf_char       =   mavc.getc();
         buf_hex_rx[0]  =   (unsigned int)buf_char;
         for(int i=0;i<29;i++){  buf_hex_rx[29-i]   =   buf_hex_rx[28-i];  }
         if(buf_hex_rx[29]==0x40 && buf_hex_rx[28]==0x46 && buf_hex_rx[27]==0x42 && buf_hex_rx[26]==0x0D){
-        // ******************** waiting @LC ********************
+        // ******************** waiting @LC ********************       
+
+            ///////////////////
+            flag_lc =   1;          // end of @LC flag
+
+        }   
+    }
+    
+    while(flag_cm<loop){
+        
+        // ******************** sequence No.1 ********************
+        buf_char       =   mavc.getc();
+        buf_hex_rx[0]  =   (unsigned int)buf_char;
+        for(int i=0;i<29;i++){  buf_hex_rx[29-i]   =   buf_hex_rx[28-i];  }
+        if(buf_hex_rx[29]==0x40 && buf_hex_rx[28]==0x43 && buf_hex_rx[27]==0x4D && buf_hex_rx[26]==0x0D){
+        // ******************** sequence No.1 ********************
+            
+            // ******************** sequence No.2 ********************
+            // send to mavc
+            mavc.putc(H);
+            for(int i=0;i<data;i++){  mavc.putc(D[i]);  }
+            // ******************** sequence No.2 ********************
+            
+            // ******************** sequence No.3 ********************
+            // buf |  25  | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 |  9 |  8 |  7 |  6 |  5  |
+            //     |header|   AccX  |   AccY  |   AccZ  |  GyroX  |  GyroY  |   GyroZ | Azimuth | Altitude|   GPSX  |   GPSY   |
+            //     |   H  |   D[1]  |   D[2]  |   D[3]  |   D[4]  |   D[5]  |   D[6]  |   D[7]  |   D[8]  |   D[9]  |   D[10]  |
+            // transrating hex to dec
+            for(int i=0;i<10;i++){  buf_dec_rx[i]   =   buf_hex_rx[24-i*2]*256+buf_hex_rx[23-i*2];   }
+            for(int i=0;i<3;i++){   acc[i]  =   ((double)buf_dec_rx[i]-32768)/65535*20*9.8;    }
+            for(int i=0;i<3;i++){   gyro[i] =   ((double)buf_dec_rx[i+3]-32768)/65535*600/180*pi;  }
+            azi =   (double)buf_dec_rx[6]/65535*2*pi;
+            alt =   ((double)buf_dec_rx[7]-32768)*0.1;
+            for(int i=0;i<2;i++){   GPS[i]  =   ((double)buf_dec_rx[i+8]-32768)*0.1;   }
+            // ******************** sequence No.3 ********************
+            
+            // ***************** horizontal guidance *****************//1-4, 2-3
+            if(flag_homo == 0 ) {
             
             // ******************** homotopy ********************
             
@@ -439,7 +483,7 @@
               }
             }
             
-            //////function
+            /////function
             for(int jh=0;jh<mh;jh++){
                 sum=zer;
              for(int ih=0;ih<mh;ih++){
@@ -1075,40 +1119,13 @@
                     led1 = 1;
                     wait(1.0);
                     
-            ///////////////////
-            flag_lc =   1;          // end of homotopy flag
+            ///////////// 
+            flag_homo =1;
+            }
             // ******************** homotopy ********************
             
-        }   
-    }
-    
-    while(flag_cm<loop){
-        
-        // ******************** sequence No.1 ********************
-        buf_char       =   mavc.getc();
-        buf_hex_rx[0]  =   (unsigned int)buf_char;
-        for(int i=0;i<29;i++){  buf_hex_rx[29-i]   =   buf_hex_rx[28-i];  }
-        if(buf_hex_rx[29]==0x40 && buf_hex_rx[28]==0x43 && buf_hex_rx[27]==0x4D && buf_hex_rx[26]==0x0D){
-        // ******************** sequence No.1 ********************
+            // ***************** horizontal guidance *****************
             
-            // ******************** sequence No.2 ********************
-            // send to mavc
-            mavc.putc(H);
-            for(int i=0;i<data;i++){  mavc.putc(D[i]);  }
-            // ******************** sequence No.2 ********************
-            
-            // ******************** sequence No.3 ********************
-            // buf |  25  | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 |  9 |  8 |  7 |  6 |  5  |
-            //     |header|   AccX  |   AccY  |   AccZ  |  GyroX  |  GyroY  |   GyroZ | Azimuth | Altitude|   GPSX  |   GPSY   |
-            //     |   H  |   D[1]  |   D[2]  |   D[3]  |   D[4]  |   D[5]  |   D[6]  |   D[7]  |   D[8]  |   D[9]  |   D[10]  |
-            // transrating hex to dec
-            for(int i=0;i<10;i++){  buf_dec_rx[i]   =   buf_hex_rx[24-i*2]*256+buf_hex_rx[23-i*2];   }
-            for(int i=0;i<3;i++){   acc[i]  =   ((double)buf_dec_rx[i]-32768)/65535*20*9.8;    }
-            for(int i=0;i<3;i++){   gyro[i] =   ((double)buf_dec_rx[i+3]-32768)/65535*600/180*pi;  }
-            azi =   (double)buf_dec_rx[6]/65535*2*pi;
-            alt =   ((double)buf_dec_rx[7]-32768)*0.1;
-            for(int i=0;i<2;i++){   GPS[i]  =   ((double)buf_dec_rx[i+8]-32768)*0.1;   }
-            // ******************** sequence No.3 ********************
             
             // ******************** initialization *******************
             for(int i=0;i<mt;i++){
@@ -1119,6 +1136,12 @@
             y0   =   GPS[1];
             ps0  =   azi;
             ht0  =   alt;
+            if (alt-50<2){
+            htf=2;
+            }
+            else{
+            htf  =   alt-50;
+            }
             b0      =   ht0;
             b1      =   tan(gm0);
             b2      =   (3*(htf-ht0)-drf*(2*tan(gm0)+tan(gmf)))/(drf*drf); 
@@ -1133,7 +1156,7 @@
             avq  =   gyro[1];
             avr  =   gyro[2];
             // ******************** initialization *******************
-            
+     
             // ******************** interpolation ********************
 
             if (fabs(xis- xis1)>1 && fabs(xis-xis1)<50) {
@@ -1154,15 +1177,16 @@
             // ******************** interpolation ********************
             
             // ******************** guidance law WO homo *************
-
-            /*
+            
+            /*                      //1-2,1-3,1-4
             b0      =   ht0
             b1      =   (hf-ht0)/drf
+            htc =    b0  +   b1*drp 
             */
-            /*
+            
             htc =    b0  +   b1*drp    +   b2*drp*drp  +   b3*drp*drp*drp;
             
-            for(int i=0;i<mt;i++){
+            for(int i=0;i<mt;i++){  //1-3,1-4,2-2,2-3
             c = drp-dr[i];
             c1= dr[i+1]-drp;
 
@@ -1176,16 +1200,17 @@
             break;
              }
             }
-            */
+            /*
             htc =   ht0;
             xic =   0;
             etc =   0;
+            */
             // ******************** guidance law WO homo *************
             
             // ******************** control law **********************
-            xie=xic-xir;
-            pse=(psc-psr)*dtr;
-            ete=etc-etr;
+            pse=(psr-psc);
+            xie=cos(psc)*(xir-xic)+sin(psc)*(etr-etc);
+            ete=-sin(psc)*(xir-xic)+cos(psc)*(etr-etc);
             hte=htc-htr;
             
             //horizontal
@@ -1217,12 +1242,15 @@
             com[1]  =   avqc;
             com[2]  =   avrc;
             
-            if(fabs(hte) > 12 || fabs(xie) > 12 || fabs(ete) >12){
+           //safemode 
+           
+            if(fabs(hte) > 12 || fabs(xie) > 16 || fabs(ete) >16 || flag_safe==1){
             com[0]  =   0;
             com[1]  =   0;
             com[2]  =   0;
+            flag_safe   =   1;
             }
-            
+           
             // transrating dec to hex
             for(int i=0;i<3;i++){  
                 buf_dec_tx[i]   =   19660.5/pi*com[i]+32768;