Lee Kai Xuan
/
mbed-os
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
mbed-os
by 
erkin yucel
features/unsupported/USBHost/USBHost/TARGET_RENESAS/TARGET_VK_RZ_A1H/ohci_wrapp_pipe.c
- Committer:
- xuaner
- Date:
- 2017-07-20
- Revision:
- 1:3deb71413561
- Parent:
- 0:f269e3021894
File content as of revision 1:3deb71413561:
/*******************************************************************************
* DISCLAIMER
* This software is supplied by Renesas Electronics Corporation and is only
* intended for use with Renesas products. No other uses are authorized. This
* software is owned by Renesas Electronics Corporation and is protected under
* all applicable laws, including copyright laws.
* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* Renesas reserves the right, without notice, to make changes to this software
* and to discontinue the availability of this software. By using this software,
* you agree to the additional terms and conditions found by accessing the
* following link:
* http://www.renesas.com/disclaimer
* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
*******************************************************************************/
/*******************************************************************************
Includes <System Includes> , "Project Includes"
*******************************************************************************/
#include "devdrv_usb_host_api.h"
/*******************************************************************************
Typedef definitions
*******************************************************************************/
/*******************************************************************************
Macro definitions
*******************************************************************************/
/*******************************************************************************
Imported global variables and functions (from other files)
*******************************************************************************/
/*******************************************************************************
Exported global variables and functions (to be accessed by other files)
*******************************************************************************/
/********************************************************************************************************/
/* Endpoint Configuration Data Format */
/********************************************************************************************************/
/* LINE1: Pipe Window Select Register */
/* CPU Access PIPE : USB_HOST_PIPE1 to USB_HOST_PIPE9 [ ### SET ### ] */
/* LINE2: Pipe Configuration Register */
/* Transfer Type : USB_HOST_NONE [ USB_HOST_NONE ] */
/* Buffer Ready interrupt : USB_HOST_NONE [ USB_HOST_NONE ] */
/* Double Buffer Mode : USB_HOST_DBLBON / USB_HOST_DBLBOFF [ ### SET ### ] */
/* Continuous Transmit: : USB_HOST_CNTMDON / USB_HOST_CNTMDOFF [ ### SET ### ] */
/* Short NAK : USB_HOST_NONE [ USB_HOST_NONE ] */
/* Transfer Direction : USB_HOST_NONE [ USB_HOST_NONE ] */
/* Endpoint Number : USB_HOST_NONE [ USB_HOST_NONE ] */
/* LINE3: Pipe Buffer Configuration Register */
/* Buffer Size : (uint16_t)((uint16_t)(((x) / 64) - 1) << 10) */
/* [ ### SET ### ] */
/* Buffer Top Number : (uint16_t)(x) [ ### SET ### ] */
/* LINE4: Pipe Maxpacket Size Register */
/* Max Packet Size : USB_HOST_NONE [ USB_HOST_NONE ] */
/* LINE5: Pipe Cycle Configuration Register (0x6C) */
/* ISO Buffer Flush Mode : USB_HOST_NONE [ USB_HOST_NONE ] */
/* ISO Interval Value : USB_HOST_NONE [ USB_HOST_NONE ] */
/* LINE6: use FIFO port */
/* : USB_HOST_CUSE [ ### SET ### ] */
/* : USB_HOST_D0USE / USB_HOST_D1USE */
/* : USB_HOST_D0DMA / USB_HOST_D0DMA */
/********************************************************************************************************/
/* Device Address 1 */
USB_HOST_CFG_PIPETBL_t usb_host_blk_ep_tbl1[ ] =
{
{
USB_HOST_PIPE3,
/* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBON | USB_HOST_CNTMDON | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
(uint16_t)((uint16_t)(((1024) / 64) - 1) << 10) | (uint16_t)(8),
USB_HOST_NONE,
USB_HOST_NONE,
USB_HOST_D0USE
},
{
/* Pipe end */
0xFFFF,
0xFFFF,
0xFFFF,
0xFFFF,
0xFFFF,
0xFFFF
}
};
USB_HOST_CFG_PIPETBL_t usb_host_int_ep_tbl1[ ] =
{
{
USB_HOST_PIPE6,
/* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBOFF | USB_HOST_CNTMDOFF | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
(uint16_t)((uint16_t)(((64) / 64) - 1) << 10) | (uint16_t)(40),
USB_HOST_NONE,
USB_HOST_NONE,
USB_HOST_D1USE
},
{
USB_HOST_PIPE7,
/* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBOFF | USB_HOST_CNTMDOFF | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
(uint16_t)((uint16_t)(((64) / 64) - 1) << 10) | (uint16_t)(41),
USB_HOST_NONE,
USB_HOST_NONE,
USB_HOST_D1USE
},
{
USB_HOST_PIPE8,
/* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBOFF | USB_HOST_CNTMDOFF | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
(uint16_t)((uint16_t)(((64) / 64) - 1) << 10) | (uint16_t)(42),
USB_HOST_NONE,
USB_HOST_NONE,
USB_HOST_D1USE
},
{
USB_HOST_PIPE9,
/* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBOFF | USB_HOST_CNTMDOFF | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
(uint16_t)((uint16_t)(((64) / 64) - 1) << 10) | (uint16_t)(43),
USB_HOST_NONE,
USB_HOST_NONE,
USB_HOST_D1USE
},
{
/* Pipe end */
0xFFFF,
0xFFFF,
0xFFFF,
0xFFFF,
0xFFFF,
0xFFFF
}
};
USB_HOST_CFG_PIPETBL_t usb_host_iso_ep_tbl1[ ] =
{
{
USB_HOST_PIPE1,
/* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBON | USB_HOST_CNTMDOFF | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
(uint16_t)((uint16_t)(((1024) / 64) - 1) << 10) | (uint16_t)(44),
USB_HOST_NONE,
USB_HOST_NONE,
USB_HOST_D1USE
},
{
USB_HOST_PIPE2,
/* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBON | USB_HOST_CNTMDOFF | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
(uint16_t)((uint16_t)(((1024) / 64) - 1) << 10) | (uint16_t)(76),
USB_HOST_NONE,
USB_HOST_NONE,
USB_HOST_D1USE
},
{
/* Pipe end */
0xFFFF,
0xFFFF,
0xFFFF,
0xFFFF,
0xFFFF,
0xFFFF
}
};
/* End of File */