Revision 7:e450e59b0cf8, committed 2014-08-31

Comitter:

xshige

Date:

Sun Aug 31 02:52:45 2014 +0000

Parent:

6:9f2ba6521ecc

Commit message:

Sparkfun CC3000 WiFi Shield meets mbed!; This program supports the following mbed boards with Sparkfun CC3000 WiFi Sheild. FRDM-KL25Z, ST Nucleo F401RE, ST Nucleo F030R8,LPCXpresso1549,Seeduino-Arch-Pro (ARCH_PRO); ;

Changed in this revision

--- a/NVIC_set_all_priorities.lib	Tue Jun 03 08:07:15 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +0,0 @@
-http://mbed.org/users/frankvnk/code/NVIC_set_all_priorities/#676bbfffe9f6

--- a/cc3000_hostdriver_mbedsocket.lib	Tue Jun 03 08:07:15 2014 +0000
+++ b/cc3000_hostdriver_mbedsocket.lib	Sun Aug 31 02:52:45 2014 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/Kojto/code/cc3000_hostdriver_mbedsocket/#50ab13d8f2dc
+http://mbed.org/users/Kojto/code/cc3000_hostdriver_mbedsocket/#ca8c234997c0

--- a/init.cpp	Tue Jun 03 08:07:15 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,70 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "main.h"
-#include "mbed.h"
-
-#if (MY_BOARD == WIGO)
-
-#include "NVIC_set_all_priorities.h"
-
-/**
- *  \brief Wi-Go initialization
- *  \param none
- *  \return none
- */
-void init() {
-    DigitalOut PWR_EN1(PTB2);
-    DigitalOut PWR_EN2(PTB3);
-
-    // Wi-Go set current to 500mA since we're turning on the Wi-Fi
-    PWR_EN1 = 0;
-    PWR_EN2 = 1;
-
-    NVIC_set_all_irq_priorities(3);
-    NVIC_SetPriority(SPI0_IRQn, 0x0);     // Wi-Fi SPI interrupt must be higher priority than SysTick
-    NVIC_SetPriority(PORTA_IRQn, 0x1);
-    NVIC_SetPriority(SysTick_IRQn, 0x2);  // SysTick set to lower priority than Wi-Fi SPI bus interrupt
-    PORTA->PCR[16] |=PORT_PCR_ISF_MASK;
-    PORTA->ISFR |= (1 << 16);
-}
-
-#elif (MY_BOARD == WIFI_DIPCORTEX)
-
-/**
- *  \brief Wifi DipCortex initialization
- *  \param none
- *  \return none
- */
-void init() {
-    NVIC_SetPriority(SSP1_IRQn, 0x0);
-    NVIC_SetPriority(PIN_INT0_IRQn, 0x1);
-
-    // SysTick set to lower priority than Wi-Fi SPI bus interrupt
-    NVIC_SetPriority(SysTick_IRQn, 0x2);
-}
-
-#else
-
-/**
- *  \brief Place here init routine for your board
- *  \param none
- *  \return none
- */
-void init() {
-
-}
-
-#endif

--- a/main.cpp	Tue Jun 03 08:07:15 2014 +0000
+++ b/main.cpp	Sun Aug 31 02:52:45 2014 +0000
@@ -1,3 +1,27 @@
+/*
+    Sparkfun CC3000 WiFi Shield meets mbed!
+       
+    This program supports the following mbed boards with Sparkfun CC3000 Sheild.
+    '#define' switches board.(refer to source code)
+    (1)FRDM-KL25Z (KL25Z)
+    (2)ST Nucleo F401RE (STM32F401)
+    (3)ST Nucleo F030R8 (STM32F030)
+    (4)LPCXpresso1549 (LPC1549)
+    (5)Seeduino-Arch-Pro (ARCH_PRO)
+
+  reference:  
+    https://www.sparkfun.com/products/12071 for CC300 Shield
+
+  date: 2014/8/31
+  modified by: xshige
+  
+  #you get sucess when you see the following on the console.
+  cc3000 Hello World demo.
+  IP address: 192.168.0.2
+
+  cc3000 connected to the Internet. Demo completed.
+  
+*/
 /* mbed Microcontroller Library
  * Copyright (c) 2006-2013 ARM Limited
  *
@@ -15,23 +39,49 @@
  */
 #include "mbed.h"
 #include "cc3000.h"
-#include "main.h"
+
+// define board you like (KL25Z, LPC1549, STM32F401, STM32F030 ...)
+//#define KL25Z
+#define STM32F401
+//#define STM32F030
+//#define LPC1549
+//#define ARCH_PRO
+
+// define SSID, PASSWORD you like
+#define SSID "ssid"
+#define PASSWORD "password"
 
 using namespace mbed_cc3000;
 
-/* cc3000 module declaration specific for user's board. Check also init() */
-#if (MY_BOARD == WIGO)
-cc3000 wifi(PTA16, PTA13, PTD0, SPI(PTD2, PTD3, PTC5), "ssid", "key", WPA2, false);
+/* cc3000 module declaration specific for user's board. */
+#if defined(KL25Z)
+// for KL25Z
+cc3000 wifi(PTD4, PTC9, PTD0, SPI(PTD2, PTD3, PTD1), SSID, PASSWORD, WPA2, false);
 Serial pc(USBTX, USBRX);
-#elif (MY_BOARD == WIFI_DIPCORTEX)
-cc3000 wifi(p28, p27, p30, SPI(p21, p14, p37), "ssid", "key", WPA2, false);
-Serial pc(UART_TX, UART_RX);
-#elif (MY_BOARD == MBED_BOARD_EXAMPLE)
-cc3000 wifi(p9, p10, p8, SPI(p5, p6, p7), "ssid", "key", WPA2, false);
+#endif
+#if defined(STM32F401)
+// for Nucleo STM32F401
+cc3000 wifi(PA_10, PA_8, PB_6, SPI(PA_7, PA_6, PA_5), SSID, PASSWORD, WPA2, false);
+// for Nucleo STM32F401
+Serial pc(SERIAL_TX, SERIAL_RX);
+#endif
+#if defined(STM32F030)
+// for Nucleo STM32F030
+cc3000 wifi(PA_10, PA_8, PB_6, SPI(PA_7, PA_6, PA_5), SSID, PASSWORD, WPA2, false);
+// for Nucleo STM32F030
+Serial pc(SERIAL_TX, SERIAL_RX);
+#endif
+#if defined(LPC1549)
+// for LPC1549
+cc3000 wifi(P0_29, P0_0, P0_27, SPI(P0_28, P0_12, P0_16), SSID, PASSWORD, WPA2, false);
 Serial pc(USBTX, USBRX);
-#else
+#endif
+#if defined(ARCH_PRO)
+// for Seeed Studio Arch Pro
+cc3000 wifi(P0_4, P2_5, P0_6, SPI(P0_9, P0_8, P0_7), SSID, PASSWORD, WPA2, false);
+Serial pc(USBTX, USBRX);
+#endif
 
-#endif
 
 /**
  *  \brief Hello World
@@ -39,7 +89,6 @@
  *  \return int
  */
 int main() {
-    init(); /* board dependent init */
     pc.baud(115200);
 
     printf("cc3000 Hello World demo. \r\n");

--- a/main.h	Tue Jun 03 08:07:15 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,28 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MAIN_H
-#define MAIN_H
-
-#define WIGO               1
-#define WIFI_DIPCORTEX     2
-#define MBED_BOARD_EXAMPLE 3
-#define UNDEFINED          4
-
-#define MY_BOARD WIGO
-
-void init();
-
-#endif

--- a/mbed.bld	Tue Jun 03 08:07:15 2014 +0000
+++ b/mbed.bld	Sun Aug 31 02:52:45 2014 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/0b3ab51c8877
\ No newline at end of file
+http://mbed.org/users/mbed_official/code/mbed/builds/9327015d4013
\ No newline at end of file