Diff: targets/hal/TARGET_RENESAS/TARGET_RZ_A1H/PeripheralNames.h

Revision:

391:35c2c1cf29cd

Child:

421:8e6e2662709e

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_RENESAS/TARGET_RZ_A1H/PeripheralNames.h	Thu Nov 06 11:00:10 2014 +0000
@@ -0,0 +1,128 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    UART0,
+    UART1,
+    UART2,
+    UART3,
+} UARTName;
+
+// PWMType & 1 == 1 then have to use PWDTR[12] == 1
+typedef enum {
+    PWM1A  = 0,
+    PWM1B,
+    PWM1C,
+    PWM1D,
+    PWM1E,
+    PWM1F,
+    PWM1G,
+    PWM1H,
+    PWM2A  = 0x10,
+    PWM2B,
+    PWM2C,
+    PWM2D,
+    PWM2E,
+    PWM2F,
+    PWM2G,
+    PWM2H,
+} PWMType;
+
+#define PTM_SHIFT 8
+typedef enum {
+    PWM0_PIN = (1 << PTM_SHIFT) | PWM2E,  // LED_R (through MTU2) TIOC4A [T.B.D]
+    PWM1_PIN = (0 << PTM_SHIFT) | PWM2F,  // LED_G
+    PWM2_PIN = (0 << PTM_SHIFT) | PWM2G,  // LED_B
+    PWM3_PIN = (0 << PTM_SHIFT) | PWM2H,  // LED_USER (not explicitly supported)
+    PWM4_PIN = (0 << PTM_SHIFT) | PWM1G,  // D9    
+    PWM5_PIN = (0 << PTM_SHIFT) | PWM1H,  // D8  not explicitly supported
+    PWM6_PIN = (0 << PTM_SHIFT) | PWM1F,  // D7  not explicitly supported
+    PWM7_PIN = (0 << PTM_SHIFT) | PWM1D,  // D6
+} PWMName;
+
+typedef enum {
+    AN0= 0,
+    AN1= 1,
+    AN2= 2,
+    AN3= 3,
+    AN4= 4,
+    AN5= 5,
+    AN6= 6,
+    AN7= 7,
+} ADCName;
+
+typedef enum {
+    SPI_0 = 0,
+    SPI_1,
+} SPIName;
+
+typedef enum {
+    I2C_0 = 0,
+    I2C_1,
+    I2C_2,
+    I2C_3 
+} I2CName;
+
+
+#define STDIO_UART_TX     USBTX
+#define STDIO_UART_RX     USBRX
+#define STDIO_UART        P_SCIF2
+
+// Default peripherals
+#define MBED_SPI0         p5, p6, p7, p8
+#define MBED_SPI1         p11, p12, p13, p14
+
+#define MBED_UART0        p9, p10
+#define MBED_UART1        p13, p14
+#define MBED_UART2        p28, p27
+#define MBED_UARTUSB      USBTX, USBRX
+
+#define MBED_I2C0         p28, p27
+#define MBED_I2C1         p9, p10
+
+#define MBED_CAN0         p30, p29
+
+#define MBED_ANALOGOUT0   p18
+
+#define MBED_ANALOGIN0    p15
+#define MBED_ANALOGIN1    p16
+#define MBED_ANALOGIN2    p17
+#define MBED_ANALOGIN3    p18
+#define MBED_ANALOGIN4    p19
+#define MBED_ANALOGIN5    p20
+
+#define MBED_PWMOUT0      p26
+#define MBED_PWMOUT1      p25
+#define MBED_PWMOUT2      p24
+#define MBED_PWMOUT3      p23
+#define MBED_PWMOUT4      p22
+#define MBED_PWMOUT5      p21
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif