Wim Huiskamp
/
Tiger_LCD
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
GLCD_LPC1700.cpp
- Committer:
- wim
- Date:
- 2012-11-04
- Revision:
- 1:ea0f7b1c5daf
- Parent:
- 0:a8090b59eb05
- Child:
- 2:43ede88fb5a3
File content as of revision 1:ea0f7b1c5daf:
/******************************************************************************/
/* GLCD_LPC1700 low-level Graphic LCD (320x240 pixels) for LandTiger */
/* */
/******************************************************************************/
/* This file is modified from the uVision/ARM development tools. */
/* Copyright (c) 2005-2009 Keil Software. All rights reserved. */
/* This software may only be used under the terms of a valid, current, */
/* end user licence from KEIL for a compatible version of KEIL software */
/* development tools. Nothing else gives you the right to use this software. */
/******************************************************************************/
#include "mbed.h"
#include "GLCD.h"
#include "Font_24x16.h"
/*********************** Hardware specific configuration **********************/
/* LandTiger 8bit to 16bit LCD Interface
PINS:
- EN = P0.19
- LE = P0.20
- DIR = P0.21
- CS = P0.22
- RS = P0.23
- WR = P0.24
- RD = P0.25
- DB[0.7] = P2.0...P2.7
- DB[8.15]= P2.0...P2.7 */
#define PIN_EN (1 << 19)
#define PIN_LE (1 << 20)
#define PIN_DIR (1 << 21)
#define PIN_CS (1 << 22)
#define PIN_RS (1 << 23)
#define PIN_WR (1 << 24)
#define PIN_RD (1 << 25)
/*------------------------- Speed dependant settings -------------------------*/
/* If processor works on high frequency delay has to be increased, it can be
increased by factor 2^N by this constant */
#define DELAY_2N 18
/*---------------------- Graphic LCD size definitions ------------------------*/
#define WIDTH 320 /* Screen Width (in pixels) */
#define HEIGHT 240 /* Screen Hight (in pixels) */
#define BPP 16 /* Bits per pixel */
#define BYPP ((BPP+7)/8) /* Bytes per pixel */
/*--------------- Graphic LCD interface hardware definitions -----------------*/
/* Pin EN setting to 0 or 1 */
#define LCD_EN(x) ((x) ? (LPC_GPIO0->FIOSET = PIN_EN) : (LPC_GPIO0->FIOCLR = PIN_EN));
/* Pin LE setting to 0 or 1 */
#define LCD_LE(x) ((x) ? (LPC_GPIO0->FIOSET = PIN_LE) : (LPC_GPIO0->FIOCLR = PIN_LE));
/* Pin DIR setting to 0 or 1 */
#define LCD_DIR(x) ((x) ? (LPC_GPIO0->FIOSET = PIN_DIR) : (LPC_GPIO0->FIOCLR = PIN_DIR));
/* Pin CS setting to 0 or 1 */
#define LCD_CS(x) ((x) ? (LPC_GPIO0->FIOSET = PIN_CS) : (LPC_GPIO0->FIOCLR = PIN_CS));
/* Pin RS setting to 0 or 1 */
#define LCD_RS(x) ((x) ? (LPC_GPIO0->FIOSET = PIN_RS) : (LPC_GPIO0->FIOCLR = PIN_RS));
/* Pin WR setting to 0 or 1 */
#define LCD_WR(x) ((x) ? (LPC_GPIO0->FIOSET = PIN_WR) : (LPC_GPIO0->FIOCLR = PIN_WR));
/* Pin RD setting to 0 or 1 */
#define LCD_RD(x) ((x) ? (LPC_GPIO0->FIOSET = PIN_RD) : (LPC_GPIO0->FIOCLR = PIN_RD));
#define swap(type, i, j) {type t = i; i = j; j = t;}
/*---------------------------- Global variables ------------------------------*/
/******************************************************************************/
static volatile unsigned short TextColor = Black, BackColor = White;
static unsigned short driverCode;
/************************ Local auxiliary functions ***************************/
/*******************************************************************************
* Delay in while loop cycles *
* Parameter: cnt: number of while cycles to delay *
* Return: *
*******************************************************************************/
static void delay (int cnt) {
cnt <<= DELAY_2N;
while (cnt--);
}
__asm void wait()
{
nop
BX lr
}
void wait_delay(int count)
{
while(count--);
}
/*******************************************************************************
* Send 1 short to LCD *
* Parameter: data: data to be sent *
* Return: *
*******************************************************************************/
static __inline unsigned char lcd_send (unsigned short data) {
LPC_GPIO2->FIODIR |= 0x000000ff; //P2.0...P2.7 Output
LCD_DIR(1) //Interface A->B
LCD_EN(0) //Enable 2A->2B
LPC_GPIO2->FIOPIN = data; //Write D0..D7
LCD_LE(1)
LCD_LE(0) //latch D0..D7
LPC_GPIO2->FIOPIN = data >> 8; //Write D8..D15
return(1);
}
/*******************************************************************************
* read 1 short from LCD *
* Parameter: *
* Return: short data from LCD *
*******************************************************************************/
static __inline unsigned short lcd_read (void) {
unsigned short id;
LPC_GPIO2->FIODIR &= 0xffffff00; //P2.0...P2.7 Input
LCD_DIR(0) //Interface B->A
LCD_EN(0) //Enable 2B->2A
wait_delay(80); //delay some times
id = LPC_GPIO2->FIOPIN & 0x00ff; //Read D8..D15
LCD_EN(1) //Enable 1B->1A
wait_delay(80); //delay some times
id = (id << 8) | (LPC_GPIO2->FIOPIN & 0x00ff); //Read D0..D7
LCD_DIR(1)
return(id);
}
/*******************************************************************************
* Write command to LCD controller *
* Parameter: c: command to be written *
* Return: *
*******************************************************************************/
static __inline void wr_cmd (unsigned char c) {
LCD_RS(0)
LCD_RD(1)
lcd_send(c);
LCD_WR(0)
wait();
LCD_WR(1)
}
/*******************************************************************************
* Write data to LCD controller *
* Parameter: c: data to be written *
* Return: *
*******************************************************************************/
static __inline void wr_dat (unsigned short c) {
LCD_RS(1)
LCD_RD(1)
lcd_send(c);
LCD_WR(0)
wait();
LCD_WR(1)
}
/*******************************************************************************
* Read data from LCD controller *
* Parameter: *
* Return: read data *
*******************************************************************************/
static __inline unsigned short rd_dat (void) {
unsigned short val = 0;
LCD_RS(1)
LCD_WR(1)
LCD_RD(0)
val = lcd_read();
LCD_RD(1)
return val;
}
/*******************************************************************************
* Start of data writing to LCD controller *
* Parameter: *
* Return: *
*******************************************************************************/
static __inline void wr_dat_start (void) {
LCD_CS(0)
LCD_RS(1)
}
/*******************************************************************************
* Stop of data writing to LCD controller *
* Parameter: *
* Return: *
*******************************************************************************/
static __inline void wr_dat_stop (void) {
LCD_CS(1)
}
/*******************************************************************************
* Data writing to LCD controller *
* Parameter: c: data to be written *
* Return: *
*******************************************************************************/
static __inline void wr_dat_only (unsigned short c) {
lcd_send(c);
LCD_WR(0)
wait();
LCD_WR(1)
}
/*******************************************************************************
* Write to LCD register *
* Parameter: reg: register to be read *
* val: value to write to register *
*******************************************************************************/
static __inline void wr_reg (unsigned char reg, unsigned short val) {
LCD_CS(0)
wr_cmd(reg);
wr_dat(val);
LCD_CS(1)
}
/*******************************************************************************
* Read from LCD register *
* Parameter: reg: register to be read *
* Return: value read from register *
*******************************************************************************/
static unsigned short rd_reg (unsigned short reg) {
unsigned short val = 0;
LCD_CS(0)
wr_cmd(reg);
val = rd_dat();
LCD_CS(1)
return (val);
}
/************************ Exported functions **********************************/
/*******************************************************************************
* Initialize the Graphic LCD controller *
* Parameter: *
* Return: *
*******************************************************************************/
void GLCD_Init (void) {
/* Configure the LCD Control pins */
LPC_GPIO0->FIODIR |= 0x03f80000;
LPC_GPIO0->FIOSET = 0x03f80000;
delay(5); /* Delay 50 ms */
driverCode = rd_reg(0x00);
switch (driverCode) {
case LGDP4531_ID: { //2.8" TFT LCD Module, DriverIC is LGDP4531
wr_reg(0x00,0x0001);
wr_reg(0x10,0x0628);
wr_reg(0x12,0x0006);
wr_reg(0x13,0x0A32);
wr_reg(0x11,0x0040);
wr_reg(0x15,0x0050);
wr_reg(0x12,0x0016);
delay(15);
wr_reg(0x10,0x5660);
delay(15);
wr_reg(0x13,0x2A4E);
wr_reg(0x01,0x0100);
wr_reg(0x02,0x0300);
wr_reg(0x03,0x1030);
wr_reg(0x08,0x0202);
wr_reg(0x0A,0x0000);
wr_reg(0x30,0x0000);
wr_reg(0x31,0x0402);
wr_reg(0x32,0x0106);
wr_reg(0x33,0x0700);
wr_reg(0x34,0x0104);
wr_reg(0x35,0x0301);
wr_reg(0x36,0x0707);
wr_reg(0x37,0x0305);
wr_reg(0x38,0x0208);
wr_reg(0x39,0x0F0B);
delay(15);
wr_reg(0x41,0x0002);
wr_reg(0x60,0x2700);
wr_reg(0x61,0x0001);
wr_reg(0x90,0x0119);
wr_reg(0x92,0x010A);
wr_reg(0x93,0x0004);
wr_reg(0xA0,0x0100);
delay(15);
wr_reg(0xA0,0x0000);
delay(20);
break;
}
case ILI9328_ID:
case ILI9325_ID: { //2.8" TFT LCD Module, DriverIC is ILI9325
wr_reg(0x00e7,0x0010);
wr_reg(0x0000,0x0001); //start internal osc
wr_reg(0x0001,0x0100);
wr_reg(0x0002,0x0700); //power on sequence
wr_reg(0x0003,(1<<12)|(1<<5)|(1<<4) ); //65K
wr_reg(0x0004,0x0000);
wr_reg(0x0008,0x0207);
wr_reg(0x0009,0x0000);
wr_reg(0x000a,0x0000); //display setting
wr_reg(0x000c,0x0001); //display setting
wr_reg(0x000d,0x0000); //0f3c
wr_reg(0x000f,0x0000);
//Power On sequence //
wr_reg(0x0010,0x0000);
wr_reg(0x0011,0x0007);
wr_reg(0x0012,0x0000);
wr_reg(0x0013,0x0000);
delay(15);
wr_reg(0x0010,0x1590);
wr_reg(0x0011,0x0227);
delay(15);
wr_reg(0x0012,0x009c);
delay(15);
wr_reg(0x0013,0x1900);
wr_reg(0x0029,0x0023);
wr_reg(0x002b,0x000e);
delay(15);
wr_reg(0x0020,0x0000);
wr_reg(0x0021,0x0000);
///////////////////////////////////////////////////////
delay(15);
wr_reg(0x0030,0x0007);
wr_reg(0x0031,0x0707);
wr_reg(0x0032,0x0006);
wr_reg(0x0035,0x0704);
wr_reg(0x0036,0x1f04);
wr_reg(0x0037,0x0004);
wr_reg(0x0038,0x0000);
wr_reg(0x0039,0x0706);
wr_reg(0x003c,0x0701);
wr_reg(0x003d,0x000f);
delay(15);
wr_reg(0x0050,0x0000);
wr_reg(0x0051,0x00ef);
wr_reg(0x0052,0x0000);
wr_reg(0x0053,0x013f);
wr_reg(0x0060,0xa700);
wr_reg(0x0061,0x0001);
wr_reg(0x006a,0x0000);
wr_reg(0x0080,0x0000);
wr_reg(0x0081,0x0000);
wr_reg(0x0082,0x0000);
wr_reg(0x0083,0x0000);
wr_reg(0x0084,0x0000);
wr_reg(0x0085,0x0000);
wr_reg(0x0090,0x0010);
wr_reg(0x0092,0x0000);
wr_reg(0x0093,0x0003);
wr_reg(0x0095,0x0110);
wr_reg(0x0097,0x0000);
wr_reg(0x0098,0x0000);
//display on sequence
wr_reg(0x0007,0x0133);
wr_reg(0x0020,0x0000);
wr_reg(0x0021,0x0000);
break;
}
case ILI9320_ID: { //3.2" TFT LCD Module,DriverIC is ILI9320
/* Start Initial Sequence --------------------------------------------------*/
wr_reg(0xE5, 0x8000); /* Set the internal vcore voltage */
wr_reg(0x00, 0x0001); /* Start internal OSC */
wr_reg(0x01, 0x0100); /* Set SS and SM bit */
wr_reg(0x02, 0x0700); /* Set 1 line inversion */
wr_reg(0x03, 0x1030); /* Set GRAM write direction and BGR=1 */
wr_reg(0x04, 0x0000); /* Resize register */
wr_reg(0x08, 0x0202); /* 2 lines each, back and front porch */
wr_reg(0x09, 0x0000); /* Set non-disp area refresh cyc ISC */
wr_reg(0x0A, 0x0000); /* FMARK function */
wr_reg(0x0C, 0x0000); /* RGB interface setting */
wr_reg(0x0D, 0x0000); /* Frame marker Position */
wr_reg(0x0F, 0x0000); /* RGB interface polarity */
/* Power On sequence -------------------------------------------------------*/
wr_reg(0x10, 0x0000); /* Reset Power Control 1 */
wr_reg(0x11, 0x0000); /* Reset Power Control 2 */
wr_reg(0x12, 0x0000); /* Reset Power Control 3 */
wr_reg(0x13, 0x0000); /* Reset Power Control 4 */
delay(20); /* Discharge cap power voltage (200ms)*/
wr_reg(0x10, 0x17B0); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
wr_reg(0x11, 0x0137); /* DC1[2:0], DC0[2:0], VC[2:0] */
delay(5); /* Delay 50 ms */
wr_reg(0x12, 0x0139); /* VREG1OUT voltage */
delay(5); /* Delay 50 ms */
wr_reg(0x13, 0x1D00); /* VDV[4:0] for VCOM amplitude */
wr_reg(0x29, 0x0013); /* VCM[4:0] for VCOMH */
delay(5); /* Delay 50 ms */
wr_reg(0x20, 0x0000); /* GRAM horizontal Address */
wr_reg(0x21, 0x0000); /* GRAM Vertical Address */
/* Adjust the Gamma Curve --------------------------------------------------*/
wr_reg(0x30, 0x0006);
wr_reg(0x31, 0x0101);
wr_reg(0x32, 0x0003);
wr_reg(0x35, 0x0106);
wr_reg(0x36, 0x0B02);
wr_reg(0x37, 0x0302);
wr_reg(0x38, 0x0707);
wr_reg(0x39, 0x0007);
wr_reg(0x3C, 0x0600);
wr_reg(0x3D, 0x020B);
/* Set GRAM area -----------------------------------------------------------*/
wr_reg(0x50, 0x0000); /* Horizontal GRAM Start Address */
wr_reg(0x51, (HEIGHT-1)); /* Horizontal GRAM End Address */
wr_reg(0x52, 0x0000); /* Vertical GRAM Start Address */
wr_reg(0x53, (WIDTH-1)); /* Vertical GRAM End Address */
wr_reg(0x60, 0x2700); /* Gate Scan Line */
wr_reg(0x61, 0x0001); /* NDL,VLE, REV */
wr_reg(0x6A, 0x0000); /* Set scrolling line */
/* Partial Display Control -------------------------------------------------*/
wr_reg(0x80, 0x0000);
wr_reg(0x81, 0x0000);
wr_reg(0x82, 0x0000);
wr_reg(0x83, 0x0000);
wr_reg(0x84, 0x0000);
wr_reg(0x85, 0x0000);
/* Panel Control -----------------------------------------------------------*/
wr_reg(0x90, 0x0010);
wr_reg(0x92, 0x0000);
wr_reg(0x93, 0x0003);
wr_reg(0x95, 0x0110);
wr_reg(0x97, 0x0000);
wr_reg(0x98, 0x0000);
break;
}
case ILI9331_ID: {
wr_reg(0x00E7, 0x1014);
wr_reg(0x0001, 0x0100); /* set SS and SM bit */
wr_reg(0x0002, 0x0200); /* set 1 line inversion */
wr_reg(0x0003, 0x1030); /* set GRAM write direction and BGR=1 */
wr_reg(0x0008, 0x0202); /* set the back porch and front porch */
wr_reg(0x0009, 0x0000); /* set non-display area refresh cycle ISC[3:0] */
wr_reg(0x000A, 0x0000); /* FMARK function */
wr_reg(0x000C, 0x0000); /* RGB interface setting */
wr_reg(0x000D, 0x0000); /* Frame marker Position */
wr_reg(0x000F, 0x0000); /* RGB interface polarity */
/* Power On sequence */
wr_reg(0x0010, 0x0000); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
wr_reg(0x0011, 0x0007); /* DC1[2:0], DC0[2:0], VC[2:0] */
wr_reg(0x0012, 0x0000); /* VREG1OUT voltage */
wr_reg(0x0013, 0x0000); /* VDV[4:0] for VCOM amplitude */
delay(200); /* delay 200 ms */
wr_reg(0x0010, 0x1690); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
wr_reg(0x0011, 0x0227); /* DC1[2:0], DC0[2:0], VC[2:0] */
delay(50); /* delay 50 ms */
wr_reg(0x0012, 0x000C); /* Internal reference voltage= Vci */
delay(50); /* delay 50 ms */
wr_reg(0x0013, 0x0800); /* Set VDV[4:0] for VCOM amplitude */
wr_reg(0x0029, 0x0011); /* Set VCM[5:0] for VCOMH */
wr_reg(0x002B, 0x000B); /* Set Frame Rate */
delay(50); /* delay 50 ms */
wr_reg(0x0020, 0x0000); /* GRAM horizontal Address */
wr_reg(0x0021, 0x0000); /* GRAM Vertical Address */
/* Adjust the Gamma Curve */
wr_reg(0x0030, 0x0000);
wr_reg(0x0031, 0x0106);
wr_reg(0x0032, 0x0000);
wr_reg(0x0035, 0x0204);
wr_reg(0x0036, 0x160A);
wr_reg(0x0037, 0x0707);
wr_reg(0x0038, 0x0106);
wr_reg(0x0039, 0x0707);
wr_reg(0x003C, 0x0402);
wr_reg(0x003D, 0x0C0F);
/* Set GRAM area */
wr_reg(0x0050, 0x0000); /* Horizontal GRAM Start Address */
wr_reg(0x0051, 0x00EF); /* Horizontal GRAM End Address */
wr_reg(0x0052, 0x0000); /* Vertical GRAM Start Address */
wr_reg(0x0053, 0x013F); /* Vertical GRAM Start Address */
wr_reg(0x0060, 0x2700); /* Gate Scan Line */
wr_reg(0x0061, 0x0001); /* NDL,VLE, REV */
wr_reg(0x006A, 0x0000); /* set scrolling line */
/* Partial Display Control */
wr_reg(0x0080, 0x0000);
wr_reg(0x0081, 0x0000);
wr_reg(0x0082, 0x0000);
wr_reg(0x0083, 0x0000);
wr_reg(0x0084, 0x0000);
wr_reg(0x0085, 0x0000);
/* Panel Control */
wr_reg(0x0090, 0x0010);
wr_reg(0x0092, 0x0600);
wr_reg(0x0007,0x0021);
delay(50); /* delay 50 ms */
wr_reg(0x0007,0x0061);
delay(50); /* delay 50 ms */
wr_reg(0x0007,0x0133); /* 262K color and display ON */
break;
}
case SSD1289_ID: { //3.2" TFT LCD Module,DriverIC is SSD1289
wr_reg(0x0007,0x0233); delay(5); //0x0233 Set this first or init fails !
wr_reg(0x0000,0x0001); delay(5); // osc en
wr_reg(0x0003,0xA8A4); delay(5); // powercontrol 1 0xA8A4
wr_reg(0x000C,0x0000); delay(5); // powercontrol 2
wr_reg(0x000D,0x080C); delay(5); // powercontrol 3
wr_reg(0x000E,0x2B00); delay(5); // powercontrol 4
wr_reg(0x001E,0x00B0); delay(5); // powercontrol 5
//orig wr_reg(0x0001,0x2b3F); delay(5); // 0x2b3f Mux=320, BGR, RL=0, TB=1
wr_reg(0x0001,0x6B3F); delay(5); // 0x6B3F Mux=320, BGR, RL=1, TB=1
// wr_reg(0x0001,0x293F); delay(5); // 0x293f Mux=320, BGR, RL=0, TB=0
wr_reg(0x0002,0x0600); delay(5); // Driver AC mode
wr_reg(0x0010,0x0000); delay(5); // Exit Sleep
wr_reg(0x0011,0x6078); delay(5); // Entry mode 0x6078 = 65k colors, Hor and Vert Addr Incr, AM=1 vert writing dir
// wr_reg(0x0011,0x4030); delay(5); // Entry mode 0x4030 = 262k colors, Hor and Vert Addr Incr. AM=0 hor writing dir
wr_reg(0x0005,0x0000); delay(5); // Compare Regs (default)
wr_reg(0x0006,0x0000); delay(5);
wr_reg(0x0016,0xEF1C); delay(5); // Hor Porch (default)
wr_reg(0x0017,0x0003); delay(5); // Ver Porch (default 0103)
wr_reg(0x0007,0x0233); delay(5); //0x0233
wr_reg(0x000B,0x0000); delay(5); // Frame cycle control default 5308)
wr_reg(0x000F,0x0000); delay(5); // Gate scan start position
wr_reg(0x0041,0x0000); delay(5); // Vert Scroll control
wr_reg(0x0042,0x0000); delay(5);
wr_reg(0x0048,0x0000); delay(5); // First screen pos (default)
wr_reg(0x0049,0x013F); delay(5);
wr_reg(0x004A,0x0000); delay(5); // Second screen pos
wr_reg(0x004B,0x0000); delay(5);
wr_reg(0x0044,0xEF00); delay(5); // Hor addr pos
wr_reg(0x0045,0x0000); delay(5); // Vert Addr pos
wr_reg(0x0046,0x013F); delay(5);
wr_reg(0x0030,0x0707); delay(5); // Gamma
wr_reg(0x0031,0x0204); delay(5);
wr_reg(0x0032,0x0204); delay(5);
wr_reg(0x0033,0x0502); delay(5);
wr_reg(0x0034,0x0507); delay(5);
wr_reg(0x0035,0x0204); delay(5);
wr_reg(0x0036,0x0204); delay(5);
wr_reg(0x0037,0x0502); delay(5);
wr_reg(0x003A,0x0302); delay(5);
wr_reg(0x003B,0x0302); delay(5);
wr_reg(0x0023,0x0000); delay(5); // Write data mask (default)
wr_reg(0x0024,0x0000); delay(5);
wr_reg(0x0025,0x8000); delay(5); // Frame freq 65 Hz
wr_reg(0x004e,0); // Start x
wr_reg(0x004f,0); // Start y
break;
}
case SSD1298_ID: {
wr_reg(0x0028,0x0006);
wr_reg(0x0000,0x0001);
wr_reg(0x0003,0xaea4); /* power control 1---line frequency and VHG,VGL voltage */
wr_reg(0x000c,0x0004); /* power control 2---VCIX2 output voltage */
wr_reg(0x000d,0x000c); /* power control 3---Vlcd63 voltage */
wr_reg(0x000e,0x2800); /* power control 4---VCOMA voltage VCOML=VCOMH*0.9475-VCOMA */
wr_reg(0x001e,0x00b5); /* POWER CONTROL 5---VCOMH voltage */
wr_reg(0x0001,0x3b3f);
wr_reg(0x0002,0x0600);
wr_reg(0x0010,0x0000);
wr_reg(0x0011,0x6830);
wr_reg(0x0005,0x0000);
wr_reg(0x0006,0x0000);
wr_reg(0x0016,0xef1c);
wr_reg(0x0007,0x0033); /* Display control 1 */
/* when GON=1 and DTE=0,all gate outputs become VGL */
/* when GON=1 and DTE=0,all gate outputs become VGH */
/* non-selected gate wires become VGL */
wr_reg(0x000b,0x0000);
wr_reg(0x000f,0x0000);
wr_reg(0x0041,0x0000);
wr_reg(0x0042,0x0000);
wr_reg(0x0048,0x0000);
wr_reg(0x0049,0x013f);
wr_reg(0x004a,0x0000);
wr_reg(0x004b,0x0000);
wr_reg(0x0044,0xef00); /* Horizontal RAM start and end address */
wr_reg(0x0045,0x0000); /* Vretical RAM start address */
wr_reg(0x0046,0x013f); /* Vretical RAM end address */
wr_reg(0x004e,0x0000); /* set GDDRAM x address counter */
wr_reg(0x004f,0x0000); /* set GDDRAM y address counter */
/* y control */
wr_reg(0x0030,0x0707);
wr_reg(0x0031,0x0202);
wr_reg(0x0032,0x0204);
wr_reg(0x0033,0x0502);
wr_reg(0x0034,0x0507);
wr_reg(0x0035,0x0204);
wr_reg(0x0036,0x0204);
wr_reg(0x0037,0x0502);
wr_reg(0x003a,0x0302);
wr_reg(0x003b,0x0302);
wr_reg(0x0023,0x0000);
wr_reg(0x0024,0x0000);
wr_reg(0x0025,0x8000);
wr_reg(0x0026,0x7000);
wr_reg(0x0020,0xb0eb);
wr_reg(0x0027,0x007c);
break;
}
case SSD2119_ID: {
/* POWER ON & RESET DISPLAY OFF */
wr_reg(0x28,0x0006);
wr_reg(0x00,0x0001);
wr_reg(0x10,0x0000);
wr_reg(0x01,0x72ef);
wr_reg(0x02,0x0600);
wr_reg(0x03,0x6a38);
wr_reg(0x11,0x6874);
wr_reg(0x0f,0x0000); /* RAM WRITE DATA MASK */
wr_reg(0x0b,0x5308); /* RAM WRITE DATA MASK */
wr_reg(0x0c,0x0003);
wr_reg(0x0d,0x000a);
wr_reg(0x0e,0x2e00);
wr_reg(0x1e,0x00be);
wr_reg(0x25,0x8000);
wr_reg(0x26,0x7800);
wr_reg(0x27,0x0078);
wr_reg(0x4e,0x0000);
wr_reg(0x4f,0x0000);
wr_reg(0x12,0x08d9);
/* Adjust the Gamma Curve */
wr_reg(0x30,0x0000);
wr_reg(0x31,0x0104);
wr_reg(0x32,0x0100);
wr_reg(0x33,0x0305);
wr_reg(0x34,0x0505);
wr_reg(0x35,0x0305);
wr_reg(0x36,0x0707);
wr_reg(0x37,0x0300);
wr_reg(0x3a,0x1200);
wr_reg(0x3b,0x0800);
wr_reg(0x07,0x0033);
break;
}
#if(0)
// Note: unprintable char hidden as space and as nl !!!
case R61505U_ID1:
case R61505U_ID2: {
/* second release on 3/5 ,luminance is acceptable,water wave appear during camera preview */
wr_reg(0x0007,0x0000);
delay(50); /* delay 50 ms */
wr_reg(0x0012,0x011C); /* why need to set several times? */
wr_reg(0x00A4,0x0001); /* NVM */
wr_reg(0x0008,0x000F);
wr_reg(0x000A,0x0008);
wr_reg(0x000D,0x0008);
/* GAMMA CONTROL */
wr_reg(0x0030,0x0707);
wr_reg(0x0031,0x0007);
wr_reg(0x0032,0x0603);
wr_reg(0x0033,0x0700);
wr_reg(0x0034,0x0202);
wr_reg(0x0035,0x0002);
wr_reg(0x0036,0x1F0F);
wr_reg(0x0037,0x0707);
wr_reg(0x0038,0x0000);
wr_reg(0x0039,0x0000);
wr_reg(0x003A,0x0707);
wr_reg(0x003B,0x0000);
wr_reg(0x003C,0x0007);
wr_reg(0x003D,0x0000);
delay(50); /* delay 50 ms */
wr_reg(0x0007,0x0001);
wr_reg(0x0017,0x0001); /* Power supply startup enable */
delay(50); /* delay 50 ms */
/* power control */
wr_reg(0x0010,0x17A0);
wr_reg(0x0011,0x0217); /* reference voltage VC[2:0] Vciout = 1.00*Vcivl */
wr_reg(0x0012,0x011E); /* Vreg1out = Vcilvl*1.80 is it the same as Vgama1out ? */
wr_reg(0x0013,0x0F00); /* VDV[4:0]-->VCOM Amplitude VcomL = VcomH - Vcom Ampl */
wr_reg(0x002A,0x0000);
wr_reg(0x0029,0x000A); /* Vcomh = VCM1[4:0]*Vreg1out gate source voltage?? */
wr_reg(0x0012,0x013E); /* power supply on */
/* Coordinates Control */
wr_reg(0x0050,0x0000);
wr_reg(0x0051,0x00EF);
wr_reg(0x0052,0x0000);
wr_reg(0x0053,0x013F);
/* Pannel Image Control */
wr_reg(0x0060,0x2700);
wr_reg(0x0061,0x0001);
wr_reg(0x006A,0x0000);
wr_reg(0x0080,0x0000);
/* Partial Image Control */
wr_reg(0x0081,0x0000);
wr_reg(0x0082,0x0000);
wr_reg(0x0083,0x0000);
wr_reg(0x0084,0x0000);
wr_reg(0x0085,0x0000);
/* Panel Interface Control */
wr_reg(0x0090,0x0013); /* frenqucy */
wr_reg(0x0092,0x0300);
wr_reg(0x0093,0x0005);
wr_reg(0x0095,0x0000);
wr_reg(0x0097,0x0000);
wr_reg(0x0098,0x0000);
wr_reg(0x0001,0x0100);
wr_reg(0x0002,0x0700);
wr_reg(0x0003,0x1030);
wr_reg(0x0004,0x0000);
wr_reg(0x000C,0x0000);
wr_reg(0x000F,0x0000);
wr_reg(0x0020,0x0000);
wr_reg(0x0021,0x0000);
wr_reg(0x0007,0x0021);
delay(200); /* delay 200 ms */
wr_reg(0x0007,0x0061);
delay(200); /* delay 200 ms */
wr_reg(0x0007,0x0173);
break;
}
case SPFD5408B_ID: {
wr_reg(0x0001,0x0100); /* Driver Output Contral Register */
wr_reg(0x0002,0x0700); /* LCD Driving Waveform Contral */
wr_reg(0x0003,0x1030); /* Entry ModeÉèÖÃ */
wr_reg(0x0004,0x0000); /* Scalling Control register */
wr_reg(0x0008,0x0207); /* Display Control 2 */
wr_reg(0x0009,0x0000); /* Display Control 3 */
wr_reg(0x000A,0x0000); /* Frame Cycle Control */
wr_reg(0x000C,0x0000); /* External Display Interface Control 1 */
wr_reg(0x000D,0x0000); /* Frame Maker Position */
wr_reg(0x000F,0x0000); /* External Display Interface Control 2 */
delay(50);
wr_reg(0x0007,0x0101); /* Display Control */
delay(50);
wr_reg(0x0010,0x16B0); /* Power Control 1 */
wr_reg(0x0011,0x0001); /* Power Control 2 */
wr_reg(0x0017,0x0001); /* Power Control 3 */
wr_reg(0x0012,0x0138); /* Power Control 4 */
wr_reg(0x0013,0x0800); /* Power Control 5 */
wr_reg(0x0029,0x0009); /* NVM read data 2 */
wr_reg(0x002a,0x0009); /* NVM read data 3 */
wr_reg(0x00a4,0x0000);
wr_reg(0x0050,0x0000); /* ÉèÖòÙ×÷´°¿ÚµÄXÖῪʼÁÐ */
wr_reg(0x0051,0x00EF); /* ÉèÖòÙ×÷´°¿ÚµÄXÖá½áÊøÁÐ */
wr_reg(0x0052,0x0000); /* ÉèÖòÙ×÷´°¿ÚµÄYÖῪʼÐÐ */
wr_reg(0x0053,0x013F); /* ÉèÖòÙ×÷´°¿ÚµÄYÖá½áÊøÐÐ */
wr_reg(0x0060,0x2700); /* Driver Output Control */
/* ÉèÖÃÆÁÄ»µÄµãÊýÒÔ¼°É¨ÃèµÄÆðʼÐÐ */
wr_reg(0x0061,0x0003); /* Driver Output Control */
wr_reg(0x006A,0x0000); /* Vertical Scroll Control */
wr_reg(0x0080,0x0000); /* Display Position ¨C Partial Display 1 */
wr_reg(0x0081,0x0000); /* RAM Address Start ¨C Partial Display 1 */
wr_reg(0x0082,0x0000); /* RAM address End - Partial Display 1 */
wr_reg(0x0083,0x0000); /* Display Position ¨C Partial Display 2 */
wr_reg(0x0084,0x0000); /* RAM Address Start ¨C Partial Display 2 */
wr_reg(0x0085,0x0000); /* RAM address End ¨C Partail Display2 */
wr_reg(0x0090,0x0013); /* Frame Cycle Control */
wr_reg(0x0092,0x0000); /* Panel Interface Control 2 */
wr_reg(0x0093,0x0003); /* Panel Interface control 3 */
wr_reg(0x0095,0x0110); /* Frame Cycle Control */
wr_reg(0x0007,0x0173);
break;
}
case LGDP4531_ID: {
/* Setup display */
wr_reg(0x00,0x0001);
wr_reg(0x10,0x0628);
wr_reg(0x12,0x0006);
wr_reg(0x13,0x0A32);
wr_reg(0x11,0x0040);
wr_reg(0x15,0x0050);
wr_reg(0x12,0x0016);
delay(50);
wr_reg(0x10,0x5660);
delay(50);
wr_reg(0x13,0x2A4E);
wr_reg(0x01,0x0100);
wr_reg(0x02,0x0300);
wr_reg(0x03,0x1030);
wr_reg(0x08,0x0202);
wr_reg(0x0A,0x0000);
wr_reg(0x30,0x0000);
wr_reg(0x31,0x0402);
wr_reg(0x32,0x0106);
wr_reg(0x33,0x0700);
wr_reg(0x34,0x0104);
wr_reg(0x35,0x0301);
wr_reg(0x36,0x0707);
wr_reg(0x37,0x0305);
wr_reg(0x38,0x0208);
wr_reg(0x39,0x0F0B);
delay(50);
wr_reg(0x41,0x0002);
wr_reg(0x60,0x2700);
wr_reg(0x61,0x0001);
wr_reg(0x90,0x0119);
wr_reg(0x92,0x010A);
wr_reg(0x93,0x0004);
wr_reg(0xA0,0x0100);
delay(50);
wr_reg(0x07,0x0133);
delay(50);
wr_reg(0xA0,0x0000);
break;
}
case LGDP4535_ID: {
wr_reg(0x15, 0x0030); /* Set the internal vcore voltage */
wr_reg(0x9A, 0x0010); /* Start internal OSC */
wr_reg(0x11, 0x0020); /* set SS and SM bit */
wr_reg(0x10, 0x3428); /* set 1 line inversion */
wr_reg(0x12, 0x0002); /* set GRAM write direction and BGR=1 */
wr_reg(0x13, 0x1038); /* Resize register */
delay(40);
wr_reg(0x12, 0x0012); /* set the back porch and front porch */
delay(40);
wr_reg(0x10, 0x3420); /* set non-display area refresh cycle ISC[3:0] */
wr_reg(0x13, 0x3045); /* FMARK function */
delay(70);
wr_reg(0x30, 0x0000); /* RGB interface setting */
wr_reg(0x31, 0x0402); /* Frame marker Position */
wr_reg(0x32, 0x0307); /* RGB interface polarity */
wr_reg(0x33, 0x0304); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
wr_reg(0x34, 0x0004); /* DC1[2:0], DC0[2:0], VC[2:0] */
wr_reg(0x35, 0x0401); /* VREG1OUT voltage */
wr_reg(0x36, 0x0707); /* VDV[4:0] for VCOM amplitude */
wr_reg(0x37, 0x0305); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
wr_reg(0x38, 0x0610); /* DC1[2:0], DC0[2:0], VC[2:0] */
wr_reg(0x39, 0x0610); /* VREG1OUT voltage */
wr_reg(0x01, 0x0100); /* VDV[4:0] for VCOM amplitude */
wr_reg(0x02, 0x0300); /* VCM[4:0] for VCOMH */
wr_reg(0x03, 0x1030); /* GRAM horizontal Address */
wr_reg(0x08, 0x0808); /* GRAM Vertical Address */
wr_reg(0x0A, 0x0008);
wr_reg(0x60, 0x2700); /* Gate Scan Line */
wr_reg(0x61, 0x0001); /* NDL,VLE, REV */
wr_reg(0x90, 0x013E);
wr_reg(0x92, 0x0100);
wr_reg(0x93, 0x0100);
wr_reg(0xA0, 0x3000);
wr_reg(0xA3, 0x0010);
wr_reg(0x07, 0x0001);
wr_reg(0x07, 0x0021);
wr_reg(0x07, 0x0023);
wr_reg(0x07, 0x0033);
wr_reg(0x07, 0x0133);
break;
}
case HX8347D_ID: {
/* Start Initial Sequence */
wr_reg(0xEA,0x00);
wr_reg(0xEB,0x20);
wr_reg(0xEC,0x0C);
wr_reg(0xED,0xC4);
wr_reg(0xE8,0x40);
wr_reg(0xE9,0x38);
wr_reg(0xF1,0x01);
wr_reg(0xF2,0x10);
wr_reg(0x27,0xA3);
/* GAMMA SETTING */
wr_reg(0x40,0x01);
wr_reg(0x41,0x00);
wr_reg(0x42,0x00);
wr_reg(0x43,0x10);
wr_reg(0x44,0x0E);
wr_reg(0x45,0x24);
wr_reg(0x46,0x04);
wr_reg(0x47,0x50);
wr_reg(0x48,0x02);
wr_reg(0x49,0x13);
wr_reg(0x4A,0x19);
wr_reg(0x4B,0x19);
wr_reg(0x4C,0x16);
wr_reg(0x50,0x1B);
wr_reg(0x51,0x31);
wr_reg(0x52,0x2F);
wr_reg(0x53,0x3F);
wr_reg(0x54,0x3F);
wr_reg(0x55,0x3E);
wr_reg(0x56,0x2F);
wr_reg(0x57,0x7B);
wr_reg(0x58,0x09);
wr_reg(0x59,0x06);
wr_reg(0x5A,0x06);
wr_reg(0x5B,0x0C);
wr_reg(0x5C,0x1D);
wr_reg(0x5D,0xCC);
/* Power Voltage Setting */
wr_reg(0x1B,0x18);
wr_reg(0x1A,0x01);
wr_reg(0x24,0x15);
wr_reg(0x25,0x50);
wr_reg(0x23,0x8B);
wr_reg(0x18,0x36);
wr_reg(0x19,0x01);
wr_reg(0x01,0x00);
wr_reg(0x1F,0x88);
delay(50);
wr_reg(0x1F,0x80);
delay(50);
wr_reg(0x1F,0x90);
delay(50);
wr_reg(0x1F,0xD0);
delay(50);
wr_reg(0x17,0x05);
wr_reg(0x36,0x00);
wr_reg(0x28,0x38);
delay(50);
wr_reg(0x28,0x3C);
break;
}
case ST7781_ID: {
/* Start Initial Sequence */
wr_reg(0x00FF,0x0001);
wr_reg(0x00F3,0x0008);
wr_reg(0x0001,0x0100);
wr_reg(0x0002,0x0700);
wr_reg(0x0003,0x1030);
wr_reg(0x0008,0x0302);
wr_reg(0x0008,0x0207);
wr_reg(0x0009,0x0000);
wr_reg(0x000A,0x0000);
wr_reg(0x0010,0x0000);
wr_reg(0x0011,0x0005);
wr_reg(0x0012,0x0000);
wr_reg(0x0013,0x0000);
delay(50);
wr_reg(0x0010,0x12B0);
delay(50);
wr_reg(0x0011,0x0007);
delay(50);
wr_reg(0x0012,0x008B);
delay(50);
wr_reg(0x0013,0x1700);
delay(50);
wr_reg(0x0029,0x0022);
wr_reg(0x0030,0x0000);
wr_reg(0x0031,0x0707);
wr_reg(0x0032,0x0505);
wr_reg(0x0035,0x0107);
wr_reg(0x0036,0x0008);
wr_reg(0x0037,0x0000);
wr_reg(0x0038,0x0202);
wr_reg(0x0039,0x0106);
wr_reg(0x003C,0x0202);
wr_reg(0x003D,0x0408);
delay(50);
wr_reg(0x0050,0x0000);
wr_reg(0x0051,0x00EF);
wr_reg(0x0052,0x0000);
wr_reg(0x0053,0x013F);
wr_reg(0x0060,0xA700);
wr_reg(0x0061,0x0001);
wr_reg(0x0090,0x0033);
wr_reg(0x002B,0x000B);
wr_reg(0x0007,0x0133);
break;
}
#endif
default: {
/* special ID */
driverCode = rd_reg(0x67);
if (driverCode == HX8347A_ID) {
wr_reg(0x0042,0x0008);
/* Gamma setting */
wr_reg(0x0046,0x00B4);
wr_reg(0x0047,0x0043);
wr_reg(0x0048,0x0013);
wr_reg(0x0049,0x0047);
wr_reg(0x004A,0x0014);
wr_reg(0x004B,0x0036);
wr_reg(0x004C,0x0003);
wr_reg(0x004D,0x0046);
wr_reg(0x004E,0x0005);
wr_reg(0x004F,0x0010);
wr_reg(0x0050,0x0008);
wr_reg(0x0051,0x000a);
/* Window Setting */
wr_reg(0x0002,0x0000);
wr_reg(0x0003,0x0000);
wr_reg(0x0004,0x0000);
wr_reg(0x0005,0x00EF);
wr_reg(0x0006,0x0000);
wr_reg(0x0007,0x0000);
wr_reg(0x0008,0x0001);
wr_reg(0x0009,0x003F);
delay(10);
wr_reg(0x0001,0x0006);
wr_reg(0x0016,0x00C8);
wr_reg(0x0023,0x0095);
wr_reg(0x0024,0x0095);
wr_reg(0x0025,0x00FF);
wr_reg(0x0027,0x0002);
wr_reg(0x0028,0x0002);
wr_reg(0x0029,0x0002);
wr_reg(0x002A,0x0002);
wr_reg(0x002C,0x0002);
wr_reg(0x002D,0x0002);
wr_reg(0x003A,0x0001);
wr_reg(0x003B,0x0001);
wr_reg(0x003C,0x00F0);
wr_reg(0x003D,0x0000);
delay(20);
wr_reg(0x0035,0x0038);
wr_reg(0x0036,0x0078);
wr_reg(0x003E,0x0038);
wr_reg(0x0040,0x000F);
wr_reg(0x0041,0x00F0);
wr_reg(0x0038,0x0000);
/* Power Setting */
wr_reg(0x0019,0x0049);
wr_reg(0x0093,0x000A);
delay(10);
wr_reg(0x0020,0x0020);
wr_reg(0x001D,0x0003);
wr_reg(0x001E,0x0000);
wr_reg(0x001F,0x0009);
wr_reg(0x0044,0x0053);
wr_reg(0x0045,0x0010);
delay(10);
wr_reg(0x001C,0x0004);
delay(20);
wr_reg(0x0043,0x0080);
delay(5);
wr_reg(0x001B,0x000a);
delay(40);
wr_reg(0x001B,0x0012);
delay(40);
/* Display On Setting */
wr_reg(0x0090,0x007F);
wr_reg(0x0026,0x0004);
delay(40);
wr_reg(0x0026,0x0024);
wr_reg(0x0026,0x002C);
delay(40);
wr_reg(0x0070,0x0008);
wr_reg(0x0026,0x003C);
wr_reg(0x0057,0x0002);
wr_reg(0x0055,0x0000);
wr_reg(0x0057,0x0000);
} // if
break;
} // default case
} // end switch
}
/*******************************************************************************
* Get LCD Controller ID *
* Parameter: *
* Return: short Controller ID *
*******************************************************************************/
unsigned short GLCD_DriverCode () {
return (driverCode);
}
/*******************************************************************************
* Set draw window region to whole screen *
* Parameter: *
* Return: *
*******************************************************************************/
void GLCD_WindowMax (void) {
if(driverCode==0x8989)
{
wr_reg(0x44, 0); /* Horizontal GRAM Start Address */
wr_reg(0x44, 0 |((HEIGHT-1)<<8)); /* Horizontal GRAM End Address (-1) */
wr_reg(0x45, 0); /* Vertical GRAM Start Address */
wr_reg(0x46, WIDTH-1); /* Vertical GRAM End Address (-1) */
}
else
{
wr_reg(0x50, 0); /* Horizontal GRAM Start Address */
wr_reg(0x51, HEIGHT-1); /* Horizontal GRAM End Address (-1) */
wr_reg(0x52, 0); /* Vertical GRAM Start Address */
wr_reg(0x53, WIDTH-1); /* Vertical GRAM End Address (-1) */
}
}
/*******************************************************************************
* Set draw window region *
* Parameter: *
* Return: *
*******************************************************************************/
void GLCD_Window (int x1, int y1, int x2, int y2) {
if(driverCode==0x8989)
{
// wr_reg(0x44, x1); /* Horizontal GRAM Start Address */
// wr_reg(0x44, 0 | (x2<<8)); /* Horizontal GRAM End Address */
//Note x,y flipped
wr_reg(0x44, ((y2 & 0xFF) <<8) | (y1 & 0xFF)); /* Horizontal GRAM End Address | Start Address */
wr_reg(0x45, x1); /* Vertical GRAM Start Address */
wr_reg(0x46, x2); /* Vertical GRAM End Address */
wr_reg(0x4e, y1); // Init x,y to start of window
wr_reg(0x4f, x1);
}
else
{
wr_reg(0x50, x1); /* Horizontal GRAM Start Address */
wr_reg(0x51, x2); /* Horizontal GRAM End Address */
wr_reg(0x52, y1); /* Vertical GRAM Start Address */
wr_reg(0x53, y2); /* Vertical GRAM End Address */
}
}
/*******************************************************************************
* Draw a pixel in foreground color *
* Parameter: x: horizontal position *
* y: vertical position *
* Return: *
*******************************************************************************/
void GLCD_PutPixel (unsigned int x, unsigned int y) {
// Set Cursor
if(driverCode==0x8989)
{
wr_reg(0x4e, y);
wr_reg(0x4f, WIDTH-1-x);
}
else
{
wr_reg(0x20, y);
wr_reg(0x21, WIDTH-1-x);
}
LCD_CS(0)
wr_cmd(0x22);
wr_dat(TextColor);
LCD_CS(1)
}
/*******************************************************************************
* Set foreground color *
* Parameter: color: foreground color *
* Return: *
*******************************************************************************/
void GLCD_SetTextColor (unsigned short color) {
TextColor = color;
}
/*******************************************************************************
* Set background color *
* Parameter: color: background color *
* Return: *
*******************************************************************************/
void GLCD_SetBackColor (unsigned short color) {
BackColor = color;
}
/*******************************************************************************
* Clear display *
* Parameter: color: display clearing color *
* Return: *
*******************************************************************************/
void GLCD_Clear (unsigned short color) {
unsigned int i;
GLCD_WindowMax();
// Set Cursor
if(driverCode==0x8989)
{
wr_reg(0x4e, 0);
wr_reg(0x4f, 0);
}
else
{
wr_reg(0x20, 0);
wr_reg(0x21, 0);
}
LCD_CS(0)
wr_cmd(0x22);
wr_dat_start();
for(i = 0; i < (WIDTH*HEIGHT); i++)
wr_dat_only(color);
wr_dat_stop();
}
/*******************************************************************************
* Draw character on given position *
* Parameter: x: horizontal position *
* y: vertical position *
* c: pointer to character bitmap *
* Return: *
*******************************************************************************/
void GLCD_DrawChar (unsigned int x, unsigned int y, unsigned short *c) {
int idx = 0, i, j;
//wh x = WIDTH-x-CHAR_W;
if(driverCode==0x8989)
{
//wh wr_reg(0x44, y); /* Horizontal GRAM Start Address */
wr_reg(0x44, y |((y+CHAR_H-1)<<8)); /* Horizontal GRAM End Address (-1) */
wr_reg(0x45, x); /* Vertical GRAM Start Address */
wr_reg(0x46, x+CHAR_W-1); /* Vertical GRAM End Address (-1) */
wr_reg(0x4e, y);
wr_reg(0x4f, x);
}
else
{
wr_reg(0x50, y); /* Horizontal GRAM Start Address */
wr_reg(0x51, y+CHAR_H-1); /* Horizontal GRAM End Address (-1) */
wr_reg(0x52, x); /* Vertical GRAM Start Address */
wr_reg(0x53, x+CHAR_W-1); /* Vertical GRAM End Address (-1) */
wr_reg(0x20, y);
wr_reg(0x21, x);
}
LCD_CS(0)
wr_cmd(0x22);
wr_dat_start();
for (j = 0; j < CHAR_H; j++) {
//wh for (i = CHAR_W-1; i >= 0; i--) {
for (i = 0; i < CHAR_W; i++) {
if((c[idx] & (1 << i)) == 0x00) {
wr_dat_only(BackColor);
} else {
wr_dat_only(TextColor);
}
}
c++;
}
wr_dat_stop();
}
/*******************************************************************************
* Display character on given line *
* Parameter: ln: line number *
* col: column number *
* c: ascii character *
* Return: *
*******************************************************************************/
void GLCD_DisplayChar (unsigned int ln, unsigned int col, unsigned char c) {
c -= 32;
// x = column, y = line
GLCD_DrawChar(col * CHAR_W, ln * CHAR_H, (unsigned short *)&Font_24x16[c * CHAR_H]);
}
/*******************************************************************************
* Disply string on given line *
* Parameter: ln: line number *
* col: column number *
* s: pointer to string *
* Return: *
*******************************************************************************/
void GLCD_DisplayString (unsigned int ln, unsigned int col, unsigned char *s) {
GLCD_WindowMax();
while (*s) {
GLCD_DisplayChar(ln, col++, *s++);
}
}
/*******************************************************************************
* Clear given line *
* Parameter: ln: line number *
* Return: *
*******************************************************************************/
void GLCD_ClearLn (unsigned int ln) {
GLCD_WindowMax();
GLCD_DisplayString(ln, 0, (unsigned char*) " ");
}
//SSD1289
//static void lcd_SetCursor(unsigned int x,unsigned int y)
//{
// write_reg(0x004e,x); /* 0-239 */
// write_reg(0x004f,y); /* 0-319 */
//}
void GLCD_drawHLine(int x, int y, int l)
{
// char ch, cl;
// ch=((fcolorr&248)|fcolorg>>5);
// cl=((fcolorg&28)<<3|fcolorb>>3);
// cbi(P_CS, B_CS);
GLCD_Window (x, y, x+l, y);
// for (int i=0; i<l+1; i++)
// {
// LCD_Write_DATA(ch, cl);
// }
LCD_CS(0)
wr_cmd(0x22);
wr_dat_start();
for (int i=0; i<l; i++)
wr_dat_only(TextColor);
wr_dat_stop();
// sbi(P_CS, B_CS);
// clrXY();
GLCD_WindowMax();
}
void GLCD_drawVLine(int x, int y, int l)
{
// char ch, cl;
// ch=((fcolorr&248)|fcolorg>>5);
// cl=((fcolorg&28)<<3|fcolorb>>3);
// cbi(P_CS, B_CS);
GLCD_Window(x, y, x, y+l);
// for (int i=0; i<l; i++)
// {
// GLCD_wr_dat(ch, cl);
// }
LCD_CS(0)
wr_cmd(0x22);
wr_dat_start();
for (int i=0; i<l; i++)
wr_dat_only(TextColor);
wr_dat_stop();
// sbi(P_CS, B_CS);
// clrXY();
GLCD_WindowMax();
}
void GLCD_drawRect(int x1, int y1, int x2, int y2)
{
int tmp;
if (x1>x2)
{
swap(int, x1, x2);
}
if (y1>y2)
{
swap(int, y1, y2);
}
GLCD_drawHLine(x1, y1, x2-x1);
GLCD_drawHLine(x1, y2, x2-x1);
GLCD_drawVLine(x1, y1, y2-y1);
GLCD_drawVLine(x2, y1, y2-y1);
}
/*******************************************************************************
* Draw bargraph *
* Parameter: x: horizontal position *
* y: vertical position *
* w: maximum width of bargraph (in pixels) *
* val: value of active bargraph (in 1/1024) *
* Return: *
*******************************************************************************/
void GLCD_Bargraph (unsigned int x, unsigned int y, unsigned int w, unsigned int h, unsigned int val) {
int i,j;
x = WIDTH-x-w;
if(driverCode==0x8989)
{
wr_reg(0x44, y); /* Horizontal GRAM Start Address */
wr_reg(0x44, y |((y+CHAR_H-1)<<8)); /* Horizontal GRAM End Address (-1) */
wr_reg(0x45, x); /* Vertical GRAM Start Address */
wr_reg(0x46, x+w-1); /* Vertical GRAM End Address (-1) */
}
else
{
wr_reg(0x50, y); /* Horizontal GRAM Start Address */
wr_reg(0x51, y+CHAR_H-1); /* Horizontal GRAM End Address (-1) */
wr_reg(0x52, x); /* Vertical GRAM Start Address */
wr_reg(0x53, x+w-1); /* Vertical GRAM End Address (-1) */
}
val = (val * w) >> 10; /* Scale value for 24x12 characters */
if(driverCode==0x8989)
{
wr_reg(0x4e, y);
wr_reg(0x4f, x);
}
else
{
wr_reg(0x20, y);
wr_reg(0x21, x);
}
LCD_CS(0)
wr_cmd(0x22);
wr_dat_start();
for (i = 0; i < h; i++) {
for (j = w-1; j >= 0; j--) {
if(j >= val) {
wr_dat_only(BackColor);
} else {
wr_dat_only(TextColor);
}
}
}
wr_dat_stop();
}
/*******************************************************************************
* Display graphical bitmap image at position x horizontally and y vertically *
* (This function is optimized for 16 bits per pixel format, it has to be *
* adapted for any other bits per pixel format) *
* Parameter: x: horizontal position *
* y: vertical position *
* w: width of bitmap *
* h: height of bitmap *
* bitmap: address at which the bitmap data resides *
* Return: *
*******************************************************************************/
void GLCD_Bitmap (unsigned int x, unsigned int y, unsigned int w, unsigned int h, unsigned char *bitmap) {
unsigned int i, j;
unsigned short *bitmap_ptr = (unsigned short *)bitmap;
x = WIDTH-x-w;
if(driverCode==0x8989)
{
wr_reg(0x44, y); /* Horizontal GRAM Start Address */
wr_reg(0x44, y |((y+h-1)<<8)); /* Horizontal GRAM End Address (-1) */
wr_reg(0x45, x); /* Vertical GRAM Start Address */
wr_reg(0x46, x+w-1); /* Vertical GRAM End Address (-1) */
wr_reg(0x4e, y);
wr_reg(0x4f, x);
}
else
{
wr_reg(0x50, y); /* Horizontal GRAM Start Address */
wr_reg(0x51, y+h-1); /* Horizontal GRAM End Address (-1) */
wr_reg(0x52, x); /* Vertical GRAM Start Address */
wr_reg(0x53, x+w-1); /* Vertical GRAM End Address (-1) */
wr_reg(0x20, y);
wr_reg(0x21, x);
}
LCD_CS(0)
wr_cmd(0x22);
wr_dat_start();
for (j = 0; j < h; j++) {
bitmap_ptr += w-1;
for (i = 0; i < w; i++) {
wr_dat_only(*bitmap_ptr--);
}
bitmap_ptr += w+1;
}
wr_dat_stop();
}
/*******************************************************************************
* Display graphical bmp file image at position x horizontally and y vertically *
* (This function is optimized for 16 bits per pixel format, it has to be *
* adapted for any other bits per pixel format) *
* Parameter: x: horizontal position *
* y: vertical position *
* w: width of bitmap *
* h: height of bitmap *
* bmp: address at which the bmp data resides *
* Return: *
*******************************************************************************/
void GLCD_Bmp (unsigned int x, unsigned int y, unsigned int w, unsigned int h, unsigned char *bmp) {
unsigned int i, j;
unsigned short *bitmap_ptr = (unsigned short *)bmp;
//wh x = WIDTH-x-w;
if(driverCode==0x8989)
{
//wh wr_reg(0x44, y); /* Horizontal GRAM Start Address */
wr_reg(0x44, y |((y+h-1)<<8)); /* Horizontal GRAM End Address (-1) */
wr_reg(0x45, x); /* Vertical GRAM Start Address */
wr_reg(0x46, x+w-1); /* Vertical GRAM End Address (-1) */
wr_reg(0x4e, y);
wr_reg(0x4f, x);
}
else
{
wr_reg(0x50, y); /* Horizontal GRAM Start Address */
wr_reg(0x51, y+h-1); /* Horizontal GRAM End Address (-1) */
wr_reg(0x52, x); /* Vertical GRAM Start Address */
wr_reg(0x53, x+w-1); /* Vertical GRAM End Address (-1) */
wr_reg(0x20, y);
wr_reg(0x21, x);
}
LCD_CS(0)
wr_cmd(0x22);
wr_dat_start();
// bitmap_ptr += (h*w)-1;
// for (j = 0; j < h; j++) {
// for (i = 0; i < w; i++) {
// wr_dat_only(*bitmap_ptr--);
// }
// }
for (j = 0; j < h; j++) {
for (i = 0; i < w; i++) {
wr_dat_only(*bitmap_ptr++);
}
}
wr_dat_stop();
}
/******************************************************************************/