Julien VILLEMEJANE
nRF_24 module library for MBED
Dependents: IeTI_MOD24_nrf_emit IeTI_MOD24 Arts_DMX512_carteV3_MIDI_nRF IeTI_nRF24
Revision 0:87e6628220a6, committed 2021-09-16
- Comitter:
- villemejane
- Date:
- Thu Sep 16 14:08:31 2021 +0000
- Commit message:
- nRF_24 module library for MBED
Changed in this revision
| MOD24_NRF.cpp | Show annotated file Show diff for this revision Revisions of this file |
| MOD24_NRF.h | Show annotated file Show diff for this revision Revisions of this file |
diff -r 000000000000 -r 87e6628220a6 MOD24_NRF.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/MOD24_NRF.cpp Thu Sep 16 14:08:31 2021 +0000
@@ -0,0 +1,1029 @@
+/**
+ * @file nRF24L01P.cpp
+ *
+ * @author Owen Edwards
+ *
+ * @section LICENSE
+ *
+ * Copyright (c) 2010 Owen Edwards
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * @section DESCRIPTION
+ *
+ * nRF24L01+ Single Chip 2.4GHz Transceiver from Nordic Semiconductor.
+ *
+ * Datasheet:
+ *
+ * http://www.nordicsemi.no/files/Product/data_sheet/nRF24L01P_Product_Specification_1_0.pdf
+ */
+
+/**
+ * Includes
+ */
+#include "MOD24_NRF.h"
+
+/**
+ * Defines
+ *
+ * (Note that all defines here start with an underscore, e.g. '_NRF24L01P_MODE_UNKNOWN',
+ * and are local to this library. The defines in the nRF24L01P.h file do not start
+ * with the underscore, and can be used by code to access this library.)
+ */
+
+typedef enum {
+ _NRF24L01P_MODE_UNKNOWN,
+ _NRF24L01P_MODE_POWER_DOWN,
+ _NRF24L01P_MODE_STANDBY,
+ _NRF24L01P_MODE_RX,
+ _NRF24L01P_MODE_TX,
+} nRF24L01P_Mode_Type;
+
+/*
+ * The following FIFOs are present in nRF24L01+:
+ * TX three level, 32 byte FIFO
+ * RX three level, 32 byte FIFO
+ */
+#define _NRF24L01P_TX_FIFO_COUNT 3
+#define _NRF24L01P_RX_FIFO_COUNT 3
+
+#define _NRF24L01P_TX_FIFO_SIZE 32
+#define _NRF24L01P_RX_FIFO_SIZE 32
+
+#define _NRF24L01P_SPI_MAX_DATA_RATE 10000000
+
+#define _NRF24L01P_SPI_CMD_RD_REG 0x00
+#define _NRF24L01P_SPI_CMD_WR_REG 0x20
+#define _NRF24L01P_SPI_CMD_RD_RX_PAYLOAD 0x61
+#define _NRF24L01P_SPI_CMD_WR_TX_PAYLOAD 0xa0
+#define _NRF24L01P_SPI_CMD_FLUSH_TX 0xe1
+#define _NRF24L01P_SPI_CMD_FLUSH_RX 0xe2
+#define _NRF24L01P_SPI_CMD_REUSE_TX_PL 0xe3
+#define _NRF24L01P_SPI_CMD_R_RX_PL_WID 0x60
+#define _NRF24L01P_SPI_CMD_W_ACK_PAYLOAD 0xa8
+#define _NRF24L01P_SPI_CMD_W_TX_PYLD_NO_ACK 0xb0
+#define _NRF24L01P_SPI_CMD_NOP 0xff
+
+
+#define _NRF24L01P_REG_CONFIG 0x00
+#define _NRF24L01P_REG_EN_AA 0x01
+#define _NRF24L01P_REG_EN_RXADDR 0x02
+#define _NRF24L01P_REG_SETUP_AW 0x03
+#define _NRF24L01P_REG_SETUP_RETR 0x04
+#define _NRF24L01P_REG_RF_CH 0x05
+#define _NRF24L01P_REG_RF_SETUP 0x06
+#define _NRF24L01P_REG_STATUS 0x07
+#define _NRF24L01P_REG_OBSERVE_TX 0x08
+#define _NRF24L01P_REG_RPD 0x09
+#define _NRF24L01P_REG_RX_ADDR_P0 0x0a
+#define _NRF24L01P_REG_RX_ADDR_P1 0x0b
+#define _NRF24L01P_REG_RX_ADDR_P2 0x0c
+#define _NRF24L01P_REG_RX_ADDR_P3 0x0d
+#define _NRF24L01P_REG_RX_ADDR_P4 0x0e
+#define _NRF24L01P_REG_RX_ADDR_P5 0x0f
+#define _NRF24L01P_REG_TX_ADDR 0x10
+#define _NRF24L01P_REG_RX_PW_P0 0x11
+#define _NRF24L01P_REG_RX_PW_P1 0x12
+#define _NRF24L01P_REG_RX_PW_P2 0x13
+#define _NRF24L01P_REG_RX_PW_P3 0x14
+#define _NRF24L01P_REG_RX_PW_P4 0x15
+#define _NRF24L01P_REG_RX_PW_P5 0x16
+#define _NRF24L01P_REG_FIFO_STATUS 0x17
+#define _NRF24L01P_REG_DYNPD 0x1c
+#define _NRF24L01P_REG_FEATURE 0x1d
+
+#define _NRF24L01P_REG_ADDRESS_MASK 0x1f
+
+// CONFIG register:
+#define _NRF24L01P_CONFIG_PRIM_RX (1<<0)
+#define _NRF24L01P_CONFIG_PWR_UP (1<<1)
+#define _NRF24L01P_CONFIG_CRC0 (1<<2)
+#define _NRF24L01P_CONFIG_EN_CRC (1<<3)
+#define _NRF24L01P_CONFIG_MASK_MAX_RT (1<<4)
+#define _NRF24L01P_CONFIG_MASK_TX_DS (1<<5)
+#define _NRF24L01P_CONFIG_MASK_RX_DR (1<<6)
+
+#define _NRF24L01P_CONFIG_CRC_MASK (_NRF24L01P_CONFIG_EN_CRC|_NRF24L01P_CONFIG_CRC0)
+#define _NRF24L01P_CONFIG_CRC_NONE (0)
+#define _NRF24L01P_CONFIG_CRC_8BIT (_NRF24L01P_CONFIG_EN_CRC)
+#define _NRF24L01P_CONFIG_CRC_16BIT (_NRF24L01P_CONFIG_EN_CRC|_NRF24L01P_CONFIG_CRC0)
+
+// EN_AA register:
+#define _NRF24L01P_EN_AA_NONE 0
+
+// EN_RXADDR register:
+#define _NRF24L01P_EN_RXADDR_NONE 0
+
+// SETUP_AW register:
+#define _NRF24L01P_SETUP_AW_AW_MASK (0x3<<0)
+#define _NRF24L01P_SETUP_AW_AW_3BYTE (0x1<<0)
+#define _NRF24L01P_SETUP_AW_AW_4BYTE (0x2<<0)
+#define _NRF24L01P_SETUP_AW_AW_5BYTE (0x3<<0)
+
+// SETUP_RETR register:
+#define _NRF24L01P_SETUP_RETR_NONE 0
+
+// RF_SETUP register:
+#define _NRF24L01P_RF_SETUP_RF_PWR_MASK (0x3<<1)
+#define _NRF24L01P_RF_SETUP_RF_PWR_0DBM (0x3<<1)
+#define _NRF24L01P_RF_SETUP_RF_PWR_MINUS_6DBM (0x2<<1)
+#define _NRF24L01P_RF_SETUP_RF_PWR_MINUS_12DBM (0x1<<1)
+#define _NRF24L01P_RF_SETUP_RF_PWR_MINUS_18DBM (0x0<<1)
+
+#define _NRF24L01P_RF_SETUP_RF_DR_HIGH_BIT (1 << 3)
+#define _NRF24L01P_RF_SETUP_RF_DR_LOW_BIT (1 << 5)
+#define _NRF24L01P_RF_SETUP_RF_DR_MASK (_NRF24L01P_RF_SETUP_RF_DR_LOW_BIT|_NRF24L01P_RF_SETUP_RF_DR_HIGH_BIT)
+#define _NRF24L01P_RF_SETUP_RF_DR_250KBPS (_NRF24L01P_RF_SETUP_RF_DR_LOW_BIT)
+#define _NRF24L01P_RF_SETUP_RF_DR_1MBPS (0)
+#define _NRF24L01P_RF_SETUP_RF_DR_2MBPS (_NRF24L01P_RF_SETUP_RF_DR_HIGH_BIT)
+
+// STATUS register:
+#define _NRF24L01P_STATUS_TX_FULL (1<<0)
+#define _NRF24L01P_STATUS_RX_P_NO (0x7<<1)
+#define _NRF24L01P_STATUS_MAX_RT (1<<4)
+#define _NRF24L01P_STATUS_TX_DS (1<<5)
+#define _NRF24L01P_STATUS_RX_DR (1<<6)
+
+// RX_PW_P0..RX_PW_P5 registers:
+#define _NRF24L01P_RX_PW_Px_MASK 0x3F
+
+#define _NRF24L01P_TIMING_Tundef2pd_us 100000 // 100mS
+#define _NRF24L01P_TIMING_Tstby2a_us 130 // 130uS
+#define _NRF24L01P_TIMING_Thce_us 10 // 10uS
+#define _NRF24L01P_TIMING_Tpd2stby_us 4500 // 4.5mS worst case
+#define _NRF24L01P_TIMING_Tpece2csn_us 4 // 4uS
+
+/**
+ * Methods
+ */
+
+nRF24L01P::nRF24L01P(PinName mosi,
+ PinName miso,
+ PinName sck,
+ PinName csn,
+ PinName ce,
+ PinName irq) : spi_(mosi, miso, sck), nCS_(csn), ce_(ce), nIRQ_(irq) {
+
+ mode = _NRF24L01P_MODE_UNKNOWN;
+
+ disable();
+
+ nCS_ = 1;
+
+ spi_.frequency(_NRF24L01P_SPI_MAX_DATA_RATE/5); // 2Mbit, 1/5th the maximum transfer rate for the SPI bus
+ spi_.format(8,0); // 8-bit, ClockPhase = 0, ClockPolarity = 0
+
+ wait_us(_NRF24L01P_TIMING_Tundef2pd_us); // Wait for Power-on reset
+
+ setRegister(_NRF24L01P_REG_CONFIG, 0); // Power Down
+
+ setRegister(_NRF24L01P_REG_STATUS, _NRF24L01P_STATUS_MAX_RT|_NRF24L01P_STATUS_TX_DS|_NRF24L01P_STATUS_RX_DR); // Clear any pending interrupts
+
+ //
+ // Setup default configuration
+ //
+ disableAllRxPipes();
+ setRfFrequency();
+ setRfOutputPower();
+ setAirDataRate();
+ setCrcWidth();
+ setTxAddress();
+ setRxAddress();
+ disableAutoAcknowledge();
+ disableAutoRetransmit();
+ setTransferSize();
+
+ mode = _NRF24L01P_MODE_POWER_DOWN;
+
+}
+
+
+void nRF24L01P::powerUp(void) {
+
+ int config = getRegister(_NRF24L01P_REG_CONFIG);
+
+ config |= _NRF24L01P_CONFIG_PWR_UP;
+
+ setRegister(_NRF24L01P_REG_CONFIG, config);
+
+ // Wait until the nRF24L01+ powers up
+ wait_us( _NRF24L01P_TIMING_Tpd2stby_us );
+
+ mode = _NRF24L01P_MODE_STANDBY;
+
+}
+
+
+void nRF24L01P::powerDown(void) {
+
+ int config = getRegister(_NRF24L01P_REG_CONFIG);
+
+ config &= ~_NRF24L01P_CONFIG_PWR_UP;
+
+ setRegister(_NRF24L01P_REG_CONFIG, config);
+
+ // Wait until the nRF24L01+ powers down
+ wait_us( _NRF24L01P_TIMING_Tpd2stby_us ); // This *may* not be necessary (no timing is shown in the Datasheet), but just to be safe
+
+ mode = _NRF24L01P_MODE_POWER_DOWN;
+
+}
+
+
+void nRF24L01P::setReceiveMode(void) {
+
+ if ( _NRF24L01P_MODE_POWER_DOWN == mode ) powerUp();
+
+ int config = getRegister(_NRF24L01P_REG_CONFIG);
+
+ config |= _NRF24L01P_CONFIG_PRIM_RX;
+
+ setRegister(_NRF24L01P_REG_CONFIG, config);
+
+ mode = _NRF24L01P_MODE_RX;
+
+}
+
+
+void nRF24L01P::setTransmitMode(void) {
+
+ if ( _NRF24L01P_MODE_POWER_DOWN == mode ) powerUp();
+
+ int config = getRegister(_NRF24L01P_REG_CONFIG);
+
+ config &= ~_NRF24L01P_CONFIG_PRIM_RX;
+
+ setRegister(_NRF24L01P_REG_CONFIG, config);
+
+ mode = _NRF24L01P_MODE_TX;
+
+}
+
+
+void nRF24L01P::enable(void) {
+
+ ce_ = 1;
+ wait_us( _NRF24L01P_TIMING_Tpece2csn_us );
+
+}
+
+
+void nRF24L01P::disable(void) {
+
+ ce_ = 0;
+
+}
+
+void nRF24L01P::setRfFrequency(int frequency) {
+
+ if ( ( frequency < NRF24L01P_MIN_RF_FREQUENCY ) || ( frequency > NRF24L01P_MAX_RF_FREQUENCY ) ) {
+
+ error( "nRF24L01P: Invalid RF Frequency setting %d\r\n", frequency );
+ return;
+
+ }
+
+ int channel = ( frequency - NRF24L01P_MIN_RF_FREQUENCY ) & 0x7F;
+
+ setRegister(_NRF24L01P_REG_RF_CH, channel);
+
+}
+
+
+int nRF24L01P::getRfFrequency(void) {
+
+ int channel = getRegister(_NRF24L01P_REG_RF_CH) & 0x7F;
+
+ return ( channel + NRF24L01P_MIN_RF_FREQUENCY );
+
+}
+
+
+void nRF24L01P::setRfOutputPower(int power) {
+
+ int rfSetup = getRegister(_NRF24L01P_REG_RF_SETUP) & ~_NRF24L01P_RF_SETUP_RF_PWR_MASK;
+
+ switch ( power ) {
+
+ case NRF24L01P_TX_PWR_ZERO_DB:
+ rfSetup |= _NRF24L01P_RF_SETUP_RF_PWR_0DBM;
+ break;
+
+ case NRF24L01P_TX_PWR_MINUS_6_DB:
+ rfSetup |= _NRF24L01P_RF_SETUP_RF_PWR_MINUS_6DBM;
+ break;
+
+ case NRF24L01P_TX_PWR_MINUS_12_DB:
+ rfSetup |= _NRF24L01P_RF_SETUP_RF_PWR_MINUS_12DBM;
+ break;
+
+ case NRF24L01P_TX_PWR_MINUS_18_DB:
+ rfSetup |= _NRF24L01P_RF_SETUP_RF_PWR_MINUS_18DBM;
+ break;
+
+ default:
+ error( "nRF24L01P: Invalid RF Output Power setting %d\r\n", power );
+ return;
+
+ }
+
+ setRegister(_NRF24L01P_REG_RF_SETUP, rfSetup);
+
+}
+
+
+int nRF24L01P::getRfOutputPower(void) {
+
+ int rfPwr = getRegister(_NRF24L01P_REG_RF_SETUP) & _NRF24L01P_RF_SETUP_RF_PWR_MASK;
+
+ switch ( rfPwr ) {
+
+ case _NRF24L01P_RF_SETUP_RF_PWR_0DBM:
+ return NRF24L01P_TX_PWR_ZERO_DB;
+
+ case _NRF24L01P_RF_SETUP_RF_PWR_MINUS_6DBM:
+ return NRF24L01P_TX_PWR_MINUS_6_DB;
+
+ case _NRF24L01P_RF_SETUP_RF_PWR_MINUS_12DBM:
+ return NRF24L01P_TX_PWR_MINUS_12_DB;
+
+ case _NRF24L01P_RF_SETUP_RF_PWR_MINUS_18DBM:
+ return NRF24L01P_TX_PWR_MINUS_18_DB;
+
+ default:
+ error( "nRF24L01P: Unknown RF Output Power value %d\r\n", rfPwr );
+ return 0;
+
+ }
+}
+
+
+void nRF24L01P::setAirDataRate(int rate) {
+
+ int rfSetup = getRegister(_NRF24L01P_REG_RF_SETUP) & ~_NRF24L01P_RF_SETUP_RF_DR_MASK;
+
+ switch ( rate ) {
+
+ case NRF24L01P_DATARATE_250_KBPS:
+ rfSetup |= _NRF24L01P_RF_SETUP_RF_DR_250KBPS;
+ break;
+
+ case NRF24L01P_DATARATE_1_MBPS:
+ rfSetup |= _NRF24L01P_RF_SETUP_RF_DR_1MBPS;
+ break;
+
+ case NRF24L01P_DATARATE_2_MBPS:
+ rfSetup |= _NRF24L01P_RF_SETUP_RF_DR_2MBPS;
+ break;
+
+ default:
+ error( "nRF24L01P: Invalid Air Data Rate setting %d\r\n", rate );
+ return;
+
+ }
+
+ setRegister(_NRF24L01P_REG_RF_SETUP, rfSetup);
+
+}
+
+
+int nRF24L01P::getAirDataRate(void) {
+
+ int rfDataRate = getRegister(_NRF24L01P_REG_RF_SETUP) & _NRF24L01P_RF_SETUP_RF_DR_MASK;
+
+ switch ( rfDataRate ) {
+
+ case _NRF24L01P_RF_SETUP_RF_DR_250KBPS:
+ return NRF24L01P_DATARATE_250_KBPS;
+
+ case _NRF24L01P_RF_SETUP_RF_DR_1MBPS:
+ return NRF24L01P_DATARATE_1_MBPS;
+
+ case _NRF24L01P_RF_SETUP_RF_DR_2MBPS:
+ return NRF24L01P_DATARATE_2_MBPS;
+
+ default:
+ error( "nRF24L01P: Unknown Air Data Rate value %d\r\n", rfDataRate );
+ return 0;
+
+ }
+}
+
+
+void nRF24L01P::setCrcWidth(int width) {
+
+ int config = getRegister(_NRF24L01P_REG_CONFIG) & ~_NRF24L01P_CONFIG_CRC_MASK;
+
+ switch ( width ) {
+
+ case NRF24L01P_CRC_NONE:
+ config |= _NRF24L01P_CONFIG_CRC_NONE;
+ break;
+
+ case NRF24L01P_CRC_8_BIT:
+ config |= _NRF24L01P_CONFIG_CRC_8BIT;
+ break;
+
+ case NRF24L01P_CRC_16_BIT:
+ config |= _NRF24L01P_CONFIG_CRC_16BIT;
+ break;
+
+ default:
+ error( "nRF24L01P: Invalid CRC Width setting %d\r\n", width );
+ return;
+
+ }
+
+ setRegister(_NRF24L01P_REG_CONFIG, config);
+
+}
+
+
+int nRF24L01P::getCrcWidth(void) {
+
+ int crcWidth = getRegister(_NRF24L01P_REG_CONFIG) & _NRF24L01P_CONFIG_CRC_MASK;
+
+ switch ( crcWidth ) {
+
+ case _NRF24L01P_CONFIG_CRC_NONE:
+ return NRF24L01P_CRC_NONE;
+
+ case _NRF24L01P_CONFIG_CRC_8BIT:
+ return NRF24L01P_CRC_8_BIT;
+
+ case _NRF24L01P_CONFIG_CRC_16BIT:
+ return NRF24L01P_CRC_16_BIT;
+
+ default:
+ error( "nRF24L01P: Unknown CRC Width value %d\r\n", crcWidth );
+ return 0;
+
+ }
+}
+
+
+void nRF24L01P::setTransferSize(int size, int pipe) {
+
+ if ( ( pipe < NRF24L01P_PIPE_P0 ) || ( pipe > NRF24L01P_PIPE_P5 ) ) {
+
+ error( "nRF24L01P: Invalid Transfer Size pipe number %d\r\n", pipe );
+ return;
+
+ }
+
+ if ( ( size < 0 ) || ( size > _NRF24L01P_RX_FIFO_SIZE ) ) {
+
+ error( "nRF24L01P: Invalid Transfer Size setting %d\r\n", size );
+ return;
+
+ }
+
+ int rxPwPxRegister = _NRF24L01P_REG_RX_PW_P0 + ( pipe - NRF24L01P_PIPE_P0 );
+
+ setRegister(rxPwPxRegister, ( size & _NRF24L01P_RX_PW_Px_MASK ) );
+
+}
+
+
+int nRF24L01P::getTransferSize(int pipe) {
+
+ if ( ( pipe < NRF24L01P_PIPE_P0 ) || ( pipe > NRF24L01P_PIPE_P5 ) ) {
+
+ error( "nRF24L01P: Invalid Transfer Size pipe number %d\r\n", pipe );
+ return 0;
+
+ }
+
+ int rxPwPxRegister = _NRF24L01P_REG_RX_PW_P0 + ( pipe - NRF24L01P_PIPE_P0 );
+
+ int size = getRegister(rxPwPxRegister);
+
+ return ( size & _NRF24L01P_RX_PW_Px_MASK );
+
+}
+
+
+void nRF24L01P::disableAllRxPipes(void) {
+
+ setRegister(_NRF24L01P_REG_EN_RXADDR, _NRF24L01P_EN_RXADDR_NONE);
+
+}
+
+
+void nRF24L01P::disableAutoAcknowledge(void) {
+
+ setRegister(_NRF24L01P_REG_EN_AA, _NRF24L01P_EN_AA_NONE);
+
+}
+
+
+void nRF24L01P::enableAutoAcknowledge(int pipe) {
+
+ if ( ( pipe < NRF24L01P_PIPE_P0 ) || ( pipe > NRF24L01P_PIPE_P5 ) ) {
+
+ error( "nRF24L01P: Invalid Enable AutoAcknowledge pipe number %d\r\n", pipe );
+ return;
+
+ }
+
+ int enAA = getRegister(_NRF24L01P_REG_EN_AA);
+
+ enAA |= ( 1 << (pipe - NRF24L01P_PIPE_P0) );
+
+ setRegister(_NRF24L01P_REG_EN_AA, enAA);
+
+}
+
+
+void nRF24L01P::disableAutoRetransmit(void) {
+
+ setRegister(_NRF24L01P_REG_SETUP_RETR, _NRF24L01P_SETUP_RETR_NONE);
+
+}
+
+void nRF24L01P::setRxAddress(unsigned long long address, int width, int pipe) {
+
+ if ( ( pipe < NRF24L01P_PIPE_P0 ) || ( pipe > NRF24L01P_PIPE_P5 ) ) {
+
+ error( "nRF24L01P: Invalid setRxAddress pipe number %d\r\n", pipe );
+ return;
+
+ }
+
+ if ( ( pipe == NRF24L01P_PIPE_P0 ) || ( pipe == NRF24L01P_PIPE_P1 ) ) {
+
+ int setupAw = getRegister(_NRF24L01P_REG_SETUP_AW) & ~_NRF24L01P_SETUP_AW_AW_MASK;
+
+ switch ( width ) {
+
+ case 3:
+ setupAw |= _NRF24L01P_SETUP_AW_AW_3BYTE;
+ break;
+
+ case 4:
+ setupAw |= _NRF24L01P_SETUP_AW_AW_4BYTE;
+ break;
+
+ case 5:
+ setupAw |= _NRF24L01P_SETUP_AW_AW_5BYTE;
+ break;
+
+ default:
+ error( "nRF24L01P: Invalid setRxAddress width setting %d\r\n", width );
+ return;
+
+ }
+
+ setRegister(_NRF24L01P_REG_SETUP_AW, setupAw);
+
+ } else {
+
+ width = 1;
+
+ }
+
+ int rxAddrPxRegister = _NRF24L01P_REG_RX_ADDR_P0 + ( pipe - NRF24L01P_PIPE_P0 );
+
+ int cn = (_NRF24L01P_SPI_CMD_WR_REG | (rxAddrPxRegister & _NRF24L01P_REG_ADDRESS_MASK));
+
+ nCS_ = 0;
+
+ int status = spi_.write(cn);
+
+ while ( width-- > 0 ) {
+
+ //
+ // LSByte first
+ //
+ spi_.write((int) (address & 0xFF));
+ address >>= 8;
+
+ }
+
+ nCS_ = 1;
+
+ int enRxAddr = getRegister(_NRF24L01P_REG_EN_RXADDR);
+
+ enRxAddr |= (1 << ( pipe - NRF24L01P_PIPE_P0 ) );
+
+ setRegister(_NRF24L01P_REG_EN_RXADDR, enRxAddr);
+}
+
+/*
+ * This version of setRxAddress is just a wrapper for the version that takes 'long long's,
+ * in case the main code doesn't want to deal with long long's.
+ */
+void nRF24L01P::setRxAddress(unsigned long msb_address, unsigned long lsb_address, int width, int pipe) {
+
+ unsigned long long address = ( ( (unsigned long long) msb_address ) << 32 ) | ( ( (unsigned long long) lsb_address ) << 0 );
+
+ setRxAddress(address, width, pipe);
+
+}
+
+
+/*
+ * This version of setTxAddress is just a wrapper for the version that takes 'long long's,
+ * in case the main code doesn't want to deal with long long's.
+ */
+void nRF24L01P::setTxAddress(unsigned long msb_address, unsigned long lsb_address, int width) {
+
+ unsigned long long address = ( ( (unsigned long long) msb_address ) << 32 ) | ( ( (unsigned long long) lsb_address ) << 0 );
+
+ setTxAddress(address, width);
+
+}
+
+
+void nRF24L01P::setTxAddress(unsigned long long address, int width) {
+
+ int setupAw = getRegister(_NRF24L01P_REG_SETUP_AW) & ~_NRF24L01P_SETUP_AW_AW_MASK;
+
+ switch ( width ) {
+
+ case 3:
+ setupAw |= _NRF24L01P_SETUP_AW_AW_3BYTE;
+ break;
+
+ case 4:
+ setupAw |= _NRF24L01P_SETUP_AW_AW_4BYTE;
+ break;
+
+ case 5:
+ setupAw |= _NRF24L01P_SETUP_AW_AW_5BYTE;
+ break;
+
+ default:
+ error( "nRF24L01P: Invalid setTxAddress width setting %d\r\n", width );
+ return;
+
+ }
+
+ setRegister(_NRF24L01P_REG_SETUP_AW, setupAw);
+
+ int cn = (_NRF24L01P_SPI_CMD_WR_REG | (_NRF24L01P_REG_TX_ADDR & _NRF24L01P_REG_ADDRESS_MASK));
+
+ nCS_ = 0;
+
+ int status = spi_.write(cn);
+
+ while ( width-- > 0 ) {
+
+ //
+ // LSByte first
+ //
+ spi_.write((int) (address & 0xFF));
+ address >>= 8;
+
+ }
+
+ nCS_ = 1;
+
+}
+
+
+unsigned long long nRF24L01P::getRxAddress(int pipe) {
+
+ if ( ( pipe < NRF24L01P_PIPE_P0 ) || ( pipe > NRF24L01P_PIPE_P5 ) ) {
+
+ error( "nRF24L01P: Invalid setRxAddress pipe number %d\r\n", pipe );
+ return 0;
+
+ }
+
+ int width;
+
+ if ( ( pipe == NRF24L01P_PIPE_P0 ) || ( pipe == NRF24L01P_PIPE_P1 ) ) {
+
+ int setupAw = getRegister(_NRF24L01P_REG_SETUP_AW) & _NRF24L01P_SETUP_AW_AW_MASK;
+
+ switch ( setupAw ) {
+
+ case _NRF24L01P_SETUP_AW_AW_3BYTE:
+ width = 3;
+ break;
+
+ case _NRF24L01P_SETUP_AW_AW_4BYTE:
+ width = 4;
+ break;
+
+ case _NRF24L01P_SETUP_AW_AW_5BYTE:
+ width = 5;
+ break;
+
+ default:
+ error( "nRF24L01P: Unknown getRxAddress width value %d\r\n", setupAw );
+ return 0;
+
+ }
+
+ } else {
+
+ width = 1;
+
+ }
+
+ int rxAddrPxRegister = _NRF24L01P_REG_RX_ADDR_P0 + ( pipe - NRF24L01P_PIPE_P0 );
+
+ int cn = (_NRF24L01P_SPI_CMD_RD_REG | (rxAddrPxRegister & _NRF24L01P_REG_ADDRESS_MASK));
+
+ unsigned long long address = 0;
+
+ nCS_ = 0;
+
+ int status = spi_.write(cn);
+
+ for ( int i=0; i<width; i++ ) {
+
+ //
+ // LSByte first
+ //
+ address |= ( ( (unsigned long long)( spi_.write(_NRF24L01P_SPI_CMD_NOP) & 0xFF ) ) << (i*8) );
+
+ }
+
+ nCS_ = 1;
+
+ if ( !( ( pipe == NRF24L01P_PIPE_P0 ) || ( pipe == NRF24L01P_PIPE_P1 ) ) ) {
+
+ address |= ( getRxAddress(NRF24L01P_PIPE_P1) & ~((unsigned long long) 0xFF) );
+
+ }
+
+ return address;
+
+}
+
+
+unsigned long long nRF24L01P::getTxAddress(void) {
+
+ int setupAw = getRegister(_NRF24L01P_REG_SETUP_AW) & _NRF24L01P_SETUP_AW_AW_MASK;
+
+ int width;
+
+ switch ( setupAw ) {
+
+ case _NRF24L01P_SETUP_AW_AW_3BYTE:
+ width = 3;
+ break;
+
+ case _NRF24L01P_SETUP_AW_AW_4BYTE:
+ width = 4;
+ break;
+
+ case _NRF24L01P_SETUP_AW_AW_5BYTE:
+ width = 5;
+ break;
+
+ default:
+ error( "nRF24L01P: Unknown getTxAddress width value %d\r\n", setupAw );
+ return 0;
+
+ }
+
+ int cn = (_NRF24L01P_SPI_CMD_RD_REG | (_NRF24L01P_REG_TX_ADDR & _NRF24L01P_REG_ADDRESS_MASK));
+
+ unsigned long long address = 0;
+
+ nCS_ = 0;
+
+ int status = spi_.write(cn);
+
+ for ( int i=0; i<width; i++ ) {
+
+ //
+ // LSByte first
+ //
+ address |= ( ( (unsigned long long)( spi_.write(_NRF24L01P_SPI_CMD_NOP) & 0xFF ) ) << (i*8) );
+
+ }
+
+ nCS_ = 1;
+
+ return address;
+}
+
+
+bool nRF24L01P::readable(int pipe) {
+
+ if ( ( pipe < NRF24L01P_PIPE_P0 ) || ( pipe > NRF24L01P_PIPE_P5 ) ) {
+
+ error( "nRF24L01P: Invalid readable pipe number %d\r\n", pipe );
+ return false;
+
+ }
+
+ int status = getStatusRegister();
+
+ return ( ( status & _NRF24L01P_STATUS_RX_DR ) && ( ( ( status & _NRF24L01P_STATUS_RX_P_NO ) >> 1 ) == ( pipe & 0x7 ) ) );
+
+}
+
+
+int nRF24L01P::write(int pipe, char *data, int count) {
+
+ // Note: the pipe number is ignored in a Transmit / write
+
+ //
+ // Save the CE state
+ //
+ int originalCe = ce_;
+ disable();
+
+ if ( count <= 0 ) return 0;
+
+ if ( count > _NRF24L01P_TX_FIFO_SIZE ) count = _NRF24L01P_TX_FIFO_SIZE;
+
+ // Clear the Status bit
+ setRegister(_NRF24L01P_REG_STATUS, _NRF24L01P_STATUS_TX_DS);
+
+ nCS_ = 0;
+
+ int status = spi_.write(_NRF24L01P_SPI_CMD_WR_TX_PAYLOAD);
+
+ for ( int i = 0; i < count; i++ ) {
+
+ spi_.write(*data++);
+
+ }
+
+ nCS_ = 1;
+
+ int originalMode = mode;
+ setTransmitMode();
+
+ enable();
+ wait_us(_NRF24L01P_TIMING_Thce_us);
+ disable();
+
+ while ( !( getStatusRegister() & _NRF24L01P_STATUS_TX_DS ) ) {
+
+ // Wait for the transfer to complete
+
+ }
+
+ // Clear the Status bit
+ setRegister(_NRF24L01P_REG_STATUS, _NRF24L01P_STATUS_TX_DS);
+
+ if ( originalMode == _NRF24L01P_MODE_RX ) {
+
+ setReceiveMode();
+
+ }
+
+ ce_ = originalCe;
+ wait_us( _NRF24L01P_TIMING_Tpece2csn_us );
+
+ return count;
+
+}
+
+
+int nRF24L01P::read(int pipe, char *data, int count) {
+
+ if ( ( pipe < NRF24L01P_PIPE_P0 ) || ( pipe > NRF24L01P_PIPE_P5 ) ) {
+
+ error( "nRF24L01P: Invalid read pipe number %d\r\n", pipe );
+ return -1;
+
+ }
+
+ if ( count <= 0 ) return 0;
+
+ if ( count > _NRF24L01P_RX_FIFO_SIZE ) count = _NRF24L01P_RX_FIFO_SIZE;
+
+ if ( readable(pipe) ) {
+
+ nCS_ = 0;
+
+ int status = spi_.write(_NRF24L01P_SPI_CMD_R_RX_PL_WID);
+
+ int rxPayloadWidth = spi_.write(_NRF24L01P_SPI_CMD_NOP);
+
+ nCS_ = 1;
+
+ if ( ( rxPayloadWidth < 0 ) || ( rxPayloadWidth > _NRF24L01P_RX_FIFO_SIZE ) ) {
+
+ // Received payload error: need to flush the FIFO
+
+ nCS_ = 0;
+
+ int status = spi_.write(_NRF24L01P_SPI_CMD_FLUSH_RX);
+
+ int rxPayloadWidth = spi_.write(_NRF24L01P_SPI_CMD_NOP);
+
+ nCS_ = 1;
+
+ //
+ // At this point, we should retry the reception,
+ // but for now we'll just fall through...
+ //
+
+ } else {
+
+ if ( rxPayloadWidth < count ) count = rxPayloadWidth;
+
+ nCS_ = 0;
+
+ int status = spi_.write(_NRF24L01P_SPI_CMD_RD_RX_PAYLOAD);
+
+ for ( int i = 0; i < count; i++ ) {
+
+ *data++ = spi_.write(_NRF24L01P_SPI_CMD_NOP);
+
+ }
+
+ nCS_ = 1;
+
+ // Clear the Status bit
+ setRegister(_NRF24L01P_REG_STATUS, _NRF24L01P_STATUS_RX_DR);
+
+ return count;
+
+ }
+
+ } else {
+
+ //
+ // What should we do if there is no 'readable' data?
+ // We could wait for data to arrive, but for now, we'll
+ // just return with no data.
+ //
+ return 0;
+
+ }
+
+ //
+ // We get here because an error condition occured;
+ // We could wait for data to arrive, but for now, we'll
+ // just return with no data.
+ //
+ return -1;
+
+}
+
+void nRF24L01P::setRegister(int regAddress, int regData) {
+
+ //
+ // Save the CE state
+ //
+ int originalCe = ce_;
+ disable();
+
+ int cn = (_NRF24L01P_SPI_CMD_WR_REG | (regAddress & _NRF24L01P_REG_ADDRESS_MASK));
+
+ nCS_ = 0;
+
+ int status = spi_.write(cn);
+
+ spi_.write(regData & 0xFF);
+
+ nCS_ = 1;
+
+ ce_ = originalCe;
+ wait_us( _NRF24L01P_TIMING_Tpece2csn_us );
+
+}
+
+
+int nRF24L01P::getRegister(int regAddress) {
+
+ int cn = (_NRF24L01P_SPI_CMD_RD_REG | (regAddress & _NRF24L01P_REG_ADDRESS_MASK));
+
+ nCS_ = 0;
+
+ int status = spi_.write(cn);
+
+ int dn = spi_.write(_NRF24L01P_SPI_CMD_NOP);
+
+ nCS_ = 1;
+
+ return dn;
+
+}
+
+int nRF24L01P::getStatusRegister(void) {
+
+ nCS_ = 0;
+
+ int status = spi_.write(_NRF24L01P_SPI_CMD_NOP);
+
+ nCS_ = 1;
+
+ return status;
+
+}
diff -r 000000000000 -r 87e6628220a6 MOD24_NRF.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/MOD24_NRF.h Thu Sep 16 14:08:31 2021 +0000
@@ -0,0 +1,323 @@
+/****************************************************************************/
+/* Test MOD-24LR / nrf24L01 */
+/****************************************************************************/
+/* LEnsE / Julien VILLEMEJANE / Institut d'Optique Graduate School */
+/****************************************************************************/
+/* Bibliothèque */
+/****************************************************************************/
+/* Test réalisé sur Nucléo-F411RE */
+/****************************************************************************/
+
+#ifndef __MOD24NRF_H__
+#define __MOD24NRF_H__
+
+/**
+ * Includes
+ */
+#include "mbed.h"
+
+/**
+ * Defines
+ */
+#define NRF24L01P_TX_PWR_ZERO_DB 0
+#define NRF24L01P_TX_PWR_MINUS_6_DB -6
+#define NRF24L01P_TX_PWR_MINUS_12_DB -12
+#define NRF24L01P_TX_PWR_MINUS_18_DB -18
+
+#define NRF24L01P_DATARATE_250_KBPS 250
+#define NRF24L01P_DATARATE_1_MBPS 1000
+#define NRF24L01P_DATARATE_2_MBPS 2000
+
+#define NRF24L01P_CRC_NONE 0
+#define NRF24L01P_CRC_8_BIT 8
+#define NRF24L01P_CRC_16_BIT 16
+
+#define NRF24L01P_MIN_RF_FREQUENCY 2400
+#define NRF24L01P_MAX_RF_FREQUENCY 2525
+
+#define NRF24L01P_PIPE_P0 0
+#define NRF24L01P_PIPE_P1 1
+#define NRF24L01P_PIPE_P2 2
+#define NRF24L01P_PIPE_P3 3
+#define NRF24L01P_PIPE_P4 4
+#define NRF24L01P_PIPE_P5 5
+
+/**
+* Default setup for the nRF24L01+, based on the Sparkfun "Nordic Serial Interface Board"
+* for evaluation (http://www.sparkfun.com/products/9019)
+*/
+#define DEFAULT_NRF24L01P_ADDRESS ((unsigned long long) 0xE7E7E7E7E7 )
+#define DEFAULT_NRF24L01P_ADDRESS_WIDTH 5
+#define DEFAULT_NRF24L01P_CRC NRF24L01P_CRC_8_BIT
+#define DEFAULT_NRF24L01P_RF_FREQUENCY (NRF24L01P_MIN_RF_FREQUENCY + 2)
+#define DEFAULT_NRF24L01P_DATARATE NRF24L01P_DATARATE_1_MBPS
+#define DEFAULT_NRF24L01P_TX_PWR NRF24L01P_TX_PWR_ZERO_DB
+#define DEFAULT_NRF24L01P_TRANSFER_SIZE 4
+
+/**
+ * nRF24L01+ Single Chip 2.4GHz Transceiver from Nordic Semiconductor.
+ */
+class nRF24L01P {
+
+public:
+
+ /**
+ * Constructor.
+ *
+ * @param mosi mbed pin to use for MOSI line of SPI interface.
+ * @param miso mbed pin to use for MISO line of SPI interface.
+ * @param sck mbed pin to use for SCK line of SPI interface.
+ * @param csn mbed pin to use for not chip select line of SPI interface.
+ * @param ce mbed pin to use for the chip enable line.
+ * @param irq mbed pin to use for the interrupt request line.
+ */
+ nRF24L01P(PinName mosi, PinName miso, PinName sck, PinName csn, PinName ce, PinName irq = NC);
+
+ /**
+ * Set the RF frequency.
+ *
+ * @param frequency the frequency of RF transmission in MHz (2400..2525).
+ */
+ void setRfFrequency(int frequency = DEFAULT_NRF24L01P_RF_FREQUENCY);
+
+ /**
+ * Get the RF frequency.
+ *
+ * @return the frequency of RF transmission in MHz (2400..2525).
+ */
+ int getRfFrequency(void);
+
+ /**
+ * Set the RF output power.
+ *
+ * @param power the RF output power in dBm (0, -6, -12 or -18).
+ */
+ void setRfOutputPower(int power = DEFAULT_NRF24L01P_TX_PWR);
+
+ /**
+ * Get the RF output power.
+ *
+ * @return the RF output power in dBm (0, -6, -12 or -18).
+ */
+ int getRfOutputPower(void);
+
+ /**
+ * Set the Air data rate.
+ *
+ * @param rate the air data rate in kbps (250, 1M or 2M).
+ */
+ void setAirDataRate(int rate = DEFAULT_NRF24L01P_DATARATE);
+
+ /**
+ * Get the Air data rate.
+ *
+ * @return the air data rate in kbps (250, 1M or 2M).
+ */
+ int getAirDataRate(void);
+
+ /**
+ * Set the CRC width.
+ *
+ * @param width the number of bits for the CRC (0, 8 or 16).
+ */
+ void setCrcWidth(int width = DEFAULT_NRF24L01P_CRC);
+
+ /**
+ * Get the CRC width.
+ *
+ * @return the number of bits for the CRC (0, 8 or 16).
+ */
+ int getCrcWidth(void);
+
+ /**
+ * Set the Receive address.
+ *
+ * @param address address associated with the particular pipe
+ * @param width width of the address in bytes (3..5)
+ * @param pipe pipe to associate the address with (0..5, default 0)
+ *
+ * Note that Pipes 0 & 1 have 3, 4 or 5 byte addresses,
+ * while Pipes 2..5 only use the lowest byte (bits 7..0) of the
+ * address provided here, and use 2, 3 or 4 bytes from Pipe 1's address.
+ * The width parameter is ignored for Pipes 2..5.
+ */
+ void setRxAddress(unsigned long long address = DEFAULT_NRF24L01P_ADDRESS, int width = DEFAULT_NRF24L01P_ADDRESS_WIDTH, int pipe = NRF24L01P_PIPE_P0);
+
+ void setRxAddress(unsigned long msb_address, unsigned long lsb_address, int width, int pipe = NRF24L01P_PIPE_P0);
+
+ /**
+ * Set the Transmit address.
+ *
+ * @param address address for transmission
+ * @param width width of the address in bytes (3..5)
+ *
+ * Note that the address width is shared with the Receive pipes,
+ * so a change to that address width affect transmissions.
+ */
+ void setTxAddress(unsigned long long address = DEFAULT_NRF24L01P_ADDRESS, int width = DEFAULT_NRF24L01P_ADDRESS_WIDTH);
+
+ void setTxAddress(unsigned long msb_address, unsigned long lsb_address, int width);
+
+ /**
+ * Get the Receive address.
+ *
+ * @param pipe pipe to get the address from (0..5, default 0)
+ * @return the address associated with the particular pipe
+ */
+ unsigned long long getRxAddress(int pipe = NRF24L01P_PIPE_P0);
+
+ /**
+ * Get the Transmit address.
+ *
+ * @return address address for transmission
+ */
+ unsigned long long getTxAddress(void);
+
+ /**
+ * Set the transfer size.
+ *
+ * @param size the size of the transfer, in bytes (1..32)
+ * @param pipe pipe for the transfer (0..5, default 0)
+ */
+ void setTransferSize(int size = DEFAULT_NRF24L01P_TRANSFER_SIZE, int pipe = NRF24L01P_PIPE_P0);
+
+ /**
+ * Get the transfer size.
+ *
+ * @return the size of the transfer, in bytes (1..32).
+ */
+ int getTransferSize(int pipe = NRF24L01P_PIPE_P0);
+
+
+ /**
+ * Get the RPD (Received Power Detector) state.
+ *
+ * @return true if the received power exceeded -64dBm
+ */
+ bool getRPD(void);
+
+ /**
+ * Put the nRF24L01+ into Receive mode
+ */
+ void setReceiveMode(void);
+
+ /**
+ * Put the nRF24L01+ into Transmit mode
+ */
+ void setTransmitMode(void);
+
+ /**
+ * Power up the nRF24L01+ into Standby mode
+ */
+ void powerUp(void);
+
+ /**
+ * Power down the nRF24L01+ into Power Down mode
+ */
+ void powerDown(void);
+
+ /**
+ * Enable the nRF24L01+ to Receive or Transmit (using the CE pin)
+ */
+ void enable(void);
+
+ /**
+ * Disable the nRF24L01+ to Receive or Transmit (using the CE pin)
+ */
+ void disable(void);
+
+ /**
+ * Transmit data
+ *
+ * @param pipe is ignored (included for consistency with file write routine)
+ * @param data pointer to an array of bytes to write
+ * @param count the number of bytes to send (1..32)
+ * @return the number of bytes actually written, or -1 for an error
+ */
+ int write(int pipe, char *data, int count);
+
+ /**
+ * Receive data
+ *
+ * @param pipe the receive pipe to get data from
+ * @param data pointer to an array of bytes to store the received data
+ * @param count the number of bytes to receive (1..32)
+ * @return the number of bytes actually received, 0 if none are received, or -1 for an error
+ */
+ int read(int pipe, char *data, int count);
+
+ /**
+ * Determine if there is data available to read
+ *
+ * @param pipe the receive pipe to check for data
+ * @return true if the is data waiting in the given pipe
+ */
+ bool readable(int pipe = NRF24L01P_PIPE_P0);
+
+ /**
+ * Disable all receive pipes
+ *
+ * Note: receive pipes are enabled when their address is set.
+ */
+ void disableAllRxPipes(void);
+
+ /**
+ * Disable AutoAcknowledge function
+ */
+ void disableAutoAcknowledge(void);
+
+ /**
+ * Enable AutoAcknowledge function
+ *
+ * @param pipe the receive pipe
+ */
+ void enableAutoAcknowledge(int pipe = NRF24L01P_PIPE_P0);
+
+ /**
+ * Disable AutoRetransmit function
+ */
+ void disableAutoRetransmit(void);
+
+ /**
+ * Enable AutoRetransmit function
+ *
+ * @param delay the delay between restransmits, in uS (250uS..4000uS)
+ * @param count number of retransmits before generating an error (1..15)
+ */
+ void enableAutoRetransmit(int delay, int count);
+
+private:
+
+ /**
+ * Get the contents of an addressable register.
+ *
+ * @param regAddress address of the register
+ * @return the contents of the register
+ */
+ int getRegister(int regAddress);
+
+ /**
+ * Set the contents of an addressable register.
+ *
+ * @param regAddress address of the register
+ * @param regData data to write to the register
+ */
+ void setRegister(int regAddress, int regData);
+
+ /**
+ * Get the contents of the status register.
+ *
+ * @return the contents of the status register
+ */
+ int getStatusRegister(void);
+
+ SPI spi_;
+ DigitalOut nCS_;
+ DigitalOut ce_;
+ InterruptIn nIRQ_;
+
+ int mode;
+
+};
+
+#endif /* __MOD24NRF_H__ */